107 lines
3.8 KiB
C
107 lines
3.8 KiB
C
/*
|
|
* Copyright (C) 2018 Intel Corporation. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#ifndef UART16550_H
|
|
#define UART16550_H
|
|
|
|
/* Register / bit definitions for 16c550 uart */
|
|
#define UART16550_RBR 0x00
|
|
/*receive buffer register | base+00h, dlab=0b r*/
|
|
#define UART16550_THR 0x00
|
|
/*transmit holding register | base+00h, dlab=0b w*/
|
|
#define UART16550_DLL 0x00
|
|
/*divisor least significant byte | base+00h, dlab=1b rw*/
|
|
#define UART16550_IER 0x01
|
|
/*interrupt enable register | base+01h, dlab=0b rw*/
|
|
#define UART16550_DLM 0x01
|
|
/*divisor most significant byte | base+01h, dlab=1b rw*/
|
|
#define UART16550_IIR 0x02
|
|
/*interrupt identification register | base+02h, dlab=0b r*/
|
|
#define UART16550_FCR 0x02
|
|
/*fifo control register | base+02h, dlab=0b w*/
|
|
#define UART16550_LCR 0x03
|
|
/*line control register | base+03h, dlab=xb rw*/
|
|
#define UART16550_MCR 0x04
|
|
/*modem control register, only uart0 | base+04h, dlab=xb rw*/
|
|
#define UART16550_LSR 0x05
|
|
/*line status register | base+05h, dlab=xb r*/
|
|
#define UART16550_MSR 0x06
|
|
/*modem status register, only uart0 | base+06h, dlab=xb r*/
|
|
#define UART16550_SCR 0x07
|
|
/*scratch pad register | base+07h, dlab=xb rw*/
|
|
#define UART16550_MDR1 0x08
|
|
#define UARTML7213_BRCSR 0x0e
|
|
/*baud rate reference clock select register dlab xb*/
|
|
#define UARTML7213_SRST 0x0f /*Soft Reset Register dlab xb*/
|
|
|
|
/* value definitions for IIR */
|
|
#define IIR_FIFO_MASK 0xc0 /* set if FIFOs are enabled */
|
|
#define IIR_RXTOUT 0x0c
|
|
#define IIR_RLS 0x06
|
|
#define IIR_RXRDY 0x04
|
|
#define IIR_TXRDY 0x02
|
|
#define IIR_NOPEND 0x01
|
|
#define IIR_MLSC 0x00
|
|
|
|
#define IER_EDSSI (0x0008)
|
|
/*enable/disable modem status interrupt*/
|
|
#define IER_ELSI (0x0004)
|
|
/*enable/disable receive data error interrupt*/
|
|
#define IER_ETBEI (0x0002)
|
|
/*enable/disable transmit data write request interrupt*/
|
|
#define IER_ERBFI (0x0001)
|
|
/*enable/disable receive data read request interrupt*/
|
|
|
|
/* definition for LCR */
|
|
#define LCR_DLAB (1 << 7) /*DLAB THR/RBR&IER or DLL&DLM= Bit 7*/
|
|
#define LCR_SB (1 << 6) /*break control on/off= Bit 6*/
|
|
#define LCR_SP (1 << 5) /*Specifies the operation of parity bit*/
|
|
#define LCR_EPS (1 << 4) /*Specifies the logic of a parity bit*/
|
|
#define LCR_PEN (1 << 3) /*Specifies whether to add a parity bit*/
|
|
#define LCR_STB (1 << 2) /*stop bit length*/
|
|
#define LCR_WL8 (0x03) /*number of bits of serial data*/
|
|
#define LCR_WL7 (0x02) /*number of bits of serial data*/
|
|
#define LCR_WL6 (0x01) /*number of bits of serial data*/
|
|
#define LCR_WL5 (0x00) /*number of bits of serial data*/
|
|
#define LCR_PARITY_ODD (LCR_PEN)
|
|
#define LCR_PARITY_NONE 0x0
|
|
#define LCR_PARITY_EVEN (LCR_PEN | LCR_EPS)
|
|
#define LCR_NB_STOP_BITS_1 0x0
|
|
#define LCR_NB_STOP_BITS_2 (LCR_STB)
|
|
|
|
/* bit definitions for LSR */
|
|
/* at least one error in data within fifo */
|
|
#define LSR_ERR (1 << 7)
|
|
/* Transmit data Present */
|
|
#define LSR_TEMT (1 << 6)
|
|
/* Transmit data write request present */
|
|
#define LSR_THRE (1 << 5)
|
|
/* Break interrupt data Present */
|
|
#define LSR_BI (1 << 4)
|
|
/* Framing Error Occurred */
|
|
#define LSR_FE (1 << 3)
|
|
/* Parity Error Occurred */
|
|
#define LSR_PE (1 << 2)
|
|
/* Overrun error */
|
|
#define LSR_OE (1 << 1)
|
|
/* Readable received data is present */
|
|
#define LSR_DR (1 << 0)
|
|
|
|
/* definition for MCR */
|
|
#define MCR_RTS (1 << 1) /* Request to Send */
|
|
#define MCR_DTR (1 << 0) /* Data Terminal Ready */
|
|
|
|
/* definition for FCR */
|
|
#define FCR_RX_MASK 0xc0
|
|
#define FCR_DMA (1 << 3)
|
|
#define FCR_TFR (1 << 2) /* Reset Transmit Fifo */
|
|
#define FCR_RFR (1 << 1) /* Reset Receive Fifo */
|
|
#define FCR_FIFOE (1 << 0) /* Fifo Enable */
|
|
|
|
#define UART_IER_DISABLE_ALL 0x00000000
|
|
|
|
#endif /* !UART16550_H */
|