532 lines
16 KiB
ReStructuredText
532 lines
16 KiB
ReStructuredText
.. highlight:: none
|
|
|
|
.. _agl-vms:
|
|
|
|
Running AGL as VMs
|
|
##################
|
|
|
|
This document describes how to run two Automotive Grade Linux (AGL)
|
|
images as VMs on the ACRN hypervisor. This serves as the baseline for
|
|
developing the hypervisor version of the `AGL CES demo
|
|
<https://www.youtube.com/watch?v=3Bv501INyKY>`_ using open-source
|
|
technologies.
|
|
|
|
.. figure:: images/agl-demo-concept.jpg
|
|
:align: center
|
|
:width: 500px
|
|
:name: agl-demo-concept
|
|
|
|
Demo concept
|
|
|
|
:numref:`agl-demo-concept` shows the AGL demo system configuration. The
|
|
hardware is an Intel Kaby Lake NUC and three displays for the cluster
|
|
meter, the In-Vehicle Infotainment (IVI) system, and the rear seat
|
|
entertainment (RSE). For the software, there are three VMs running on
|
|
top of ACRN:
|
|
|
|
* Clear Linux OS runs as the service OS (SOS) to control the cluster meter,
|
|
* an AGL instance runs as a user OS (UOS) controlling the IVI display, and
|
|
* a second AGL UOS controls the RSE display.
|
|
|
|
:numref:`agl-demo-setup` shows the hardware and display images of a
|
|
running demo:
|
|
|
|
.. figure:: images/agl-demo-setup.jpg
|
|
:align: center
|
|
:width: 400px
|
|
:name: agl-demo-setup
|
|
|
|
Demo in action
|
|
|
|
Hardware setup
|
|
**************
|
|
|
|
Here is the hardware used for the demo development:
|
|
|
|
.. list-table:: Demo Hardware
|
|
:header-rows: 1
|
|
|
|
* - Name
|
|
- Link
|
|
- Notes
|
|
* - NUC
|
|
- Kaby Lake `NUC7i7DNHE
|
|
<https://www.intel.com/content/www/us/en/products/boards-kits/nuc/kits/nuc7i7dnhe.html>`_
|
|
-
|
|
* `Specifications
|
|
<https://www.intel.com/content/dam/support/us/en/documents/mini-pcs/nuc-kits/NUC7i7DN_TechProdSpec.pdf>`_,
|
|
* `Tested components and peripherals
|
|
<http://compatibleproducts.intel.com/ProductDetails?prodSearch=True&searchTerm=NUC7i7DNHE#>`_,
|
|
* 16GB RAM, and
|
|
* 250GB SSD
|
|
* - eDP display
|
|
- `Sharp LQ125T1JX05
|
|
<http://www.panelook.com/LQ125T1JX05-E_SHARP_12.5_LCM_overview_35649.html>`_
|
|
-
|
|
* - eDP cable
|
|
- `eDP 40 pin cable
|
|
<https://www.gorite.com/intel-nuc-dawson-canyon-edp-cable-4-lanes>`_
|
|
- Other eDP pin cables work as well
|
|
* - HDMI touch displays
|
|
- `GeChic 1303I
|
|
<https://www.gechic.com/en-portable-touch-monitor-onlap1303i-view.html>`_
|
|
-
|
|
* - Serial cable
|
|
- `Serial DB9 header cable
|
|
<https://www.gorite.com/serial-db9-header-cable-for-nuc-dawson-canyon>`_
|
|
or `RS232 lid
|
|
<https://www.gorite.com/intel-nuc-rs232-lid-for-7th-gen-dawson-canyon-nuc>`_
|
|
-
|
|
|
|
Connecting hardware
|
|
===================
|
|
|
|
Learn how to connect an eDP display to the NUC using an eDP cable as
|
|
shown in :numref:`agl-cables`, by
|
|
following the `NUC specification
|
|
<https://www.intel.com/content/dam/support/us/en/documents/mini-pcs/nuc-kits/NUC7i7DN_TechProdSpec.pdf>`_
|
|
|
|
.. figure:: images/agl-cables.jpg
|
|
:align: center
|
|
:name: agl-cables
|
|
|
|
USB an Display cable connections
|
|
|
|
As shown in :numref:`agl-cables`, connect HDMI cables and USB cables
|
|
(for touch) to the touch displays for the IVI and RSE. (If the USB port
|
|
for touch is changed, the USB bus-port number in the AGL launch script
|
|
must be changed accordingly.)
|
|
|
|
Software Setup
|
|
**************
|
|
|
|
The demo setup uses these software components and versions:
|
|
|
|
.. list-table:: Demo Software
|
|
:header-rows: 1
|
|
|
|
* - Name
|
|
- Version
|
|
- Link
|
|
* - ACRN hypervisor
|
|
- 0.3
|
|
- `ACRN project <https://github.com/projectacrn/acrn-hypervisor>`_
|
|
* - Clear Linux OS
|
|
- 26200
|
|
- `Clear Linux OS installer image
|
|
<https://download.clearlinux.org/releases/26200/clear/clear-26200-installer.img.xz>`_
|
|
* - AGL
|
|
- Funky Flounder (6.02)
|
|
- `intel-corei7-x64 image
|
|
<https://download.automotivelinux.org/AGL/release/flounder/6.0.2/intel-corei7-64/deploy/images/intel-corei7-64/agl-demo-platform-crosssdk-intel-corei7-64-20181112133144.rootfs.wic.xz>`_
|
|
* - acrn-kernel
|
|
- revision acrn-2018w49.3-140000p
|
|
- `acrn-kernel <https://github.com/projectacrn/acrn-kernel>`_
|
|
|
|
Service OS
|
|
==========
|
|
|
|
#. Download the compressed Clear Linux OS installer image from
|
|
https://download.clearlinux.org/releases/26200/clear/clear-26200-installer.img.xz
|
|
and follow the `Clear Linux OS installation guide
|
|
<https://clearlinux.org/documentation/clear-linux/get-started/bare-metal-install-server>`_
|
|
as a starting point for installing Clear Linux OS onto your platform.
|
|
Follow the recommended options for choosing an Automatic installation
|
|
type, and using the platform's storage as the target device for
|
|
installation (overwriting the existing data and creating three
|
|
partitions on the platform's storage drive).
|
|
|
|
#. After installation is complete, boot into Clear Linux OS, login as
|
|
root, and set a password.
|
|
|
|
#. Clear Linux OS is set to automatically update itself. We recommend that
|
|
you disable this feature to have more control over when the updates
|
|
happen. Use this command (as root) to disable the autoupdate feature::
|
|
|
|
# swupd autoupdate --disable
|
|
|
|
#. This demo setup uses a specific release version (26200) of Clear
|
|
Linux OS which has been verified to work with ACRN. In case you
|
|
unintentionally update or change the Clear Linux OS version, you can
|
|
fix it again using::
|
|
|
|
# swupd verify --fix --picky -m 26200
|
|
|
|
#. Use the ``swupd bundle-add`` command and add needed Clear Linux
|
|
OS bundles::
|
|
|
|
# swupd bundle-add openssh-server sudo network-basic \
|
|
kernel-iot-lts2018 os-clr-on-clr os-core-dev \
|
|
python3-basic dfu-util dtc
|
|
|
|
#. Install the graphics UI if necessary. Use only one of the two
|
|
options listed below (this guide uses the first GNOME on Wayland option)::
|
|
|
|
# swupd bundle-add desktop desktop-autostart # GNOME and Weston
|
|
|
|
or::
|
|
|
|
# swupd bundle-add software-defined-cockpit # IAS shell for IVI (optional)
|
|
|
|
|
|
#. Create a new user and allow the user to use "sudo"::
|
|
|
|
# useradd <username>
|
|
# passwd <username>
|
|
# usermod -G wheel -a <username>
|
|
|
|
|
|
#. Reboot the system::
|
|
|
|
# reboot
|
|
|
|
#. The system will reboot to the graphic interface (GDM). In the login
|
|
screen, click on the setting button and choose "GNOME on Wayland". Then
|
|
chose the <username> and enter the password to login.
|
|
|
|
|
|
#. Build ACRN. In this demo we use the ACRN v0.3 release.
|
|
Open a terminal window in Clear Linux OS desktop, create a workspace,
|
|
install needed tools, clone the ACRN Hypervisor repo source, and build ACRN::
|
|
|
|
$ mkdir workspace
|
|
$ cd workspace
|
|
$ pip3 install kconfiglib
|
|
$ git clone https://github.com/projectacrn/acrn-hypervisor
|
|
$ git checkout tags/v0.3
|
|
$ make PLATFORM=uefi
|
|
$ sudo make install
|
|
|
|
#. Install and enable ACRN::
|
|
|
|
$ sudo mount /dev/sda1 /mnt
|
|
$ sudo mkdir /mnt/EFI/acrn
|
|
$ sudo cp /usr/lib/acrn/acrn.efi /mnt/EFI/acrn/
|
|
$ efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/sda -p 1 \
|
|
-L "ACRN Hypervisor" \
|
|
-u "bootloader=\EFI\org.clearlinux\bootloaderx64.efi uart=port@0x3f8"
|
|
|
|
$ sudo cp /usr/share/acrn/samples/nuc/acrn.conf /mnt/loader/entries/
|
|
$ sudo vi /mnt/loader/entries/acrn.conf
|
|
|
|
|
|
Modify the acrn.conf file as shown below and save it::
|
|
|
|
title The ACRN Service OS
|
|
|
|
linux
|
|
/EFI/org.clearlinux/kernel-org.clearlinux.iot-lts2018-sos.4.19.0-19
|
|
|
|
options pci_devices_ignore=(0:18:1) console=tty0 console=ttyS0
|
|
root=/dev/sda3 rw rootwait ignore_loglevel no_timer_check consoleblank=0
|
|
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x00000F i915.domain_plane_owners=0x022211110000
|
|
i915.enable_gvt=1 i915.enable_guc=0 hvlog=2M@0x1FE00000
|
|
|
|
#. Set a longer timeout::
|
|
|
|
$ sudo clr-boot-manager set-timeout 20
|
|
$ sudo clr-boot-manager update
|
|
|
|
|
|
#. Reboot the system, choose "ACRN Hypervisor" and launch Clear Linux OS
|
|
SOS. If the EFI boot order is not right, use :kbd:`F10`
|
|
on boot up to enter the EFI menu and choose "ACRN Hypervisor".
|
|
|
|
|
|
Building ACRN kernel for AGL (UOS)
|
|
==================================
|
|
|
|
In this demo, we use acrn-kernel as the baseline for development for AGL.
|
|
|
|
#. Create a workspace, get the kernel source code, and configure kernel
|
|
settings with::
|
|
|
|
$ cd workspace
|
|
$ git clone https://github.com/projectacrn/acrn-kernel
|
|
$ git checkout tags/acrn-2018w49.3-140000p
|
|
$ make menuconfig
|
|
|
|
|
|
Load the **kernel_uos_config** for the UOS kernel build, and verify
|
|
the following configs options are on::
|
|
|
|
CONFIG_LOCAL_VERSION="-uos"
|
|
CONFIG_SECURITY_SMACK=y
|
|
CONFIG_SECURITY_SMACK_BRINGUP=y
|
|
CONFIG_DEFAULT_SECURITY_SMACK=y
|
|
CONFIG_EXT4_FS=y
|
|
CONFIG_EXT4_USE_FOR_EXT23=y
|
|
CONFIG_EXT4_FS_POSIX_ACL=y
|
|
CONFIG_EXT4_FS_SECURITY=y
|
|
# CONFIG_MODULES is not set
|
|
CONFIG_CAN
|
|
CONFIG_CAN_VCAN
|
|
CONFIG_CAN_SLCAN
|
|
|
|
|
|
#. Build the kernel::
|
|
|
|
$ make -j 4
|
|
$ sudo make modules_install
|
|
$ sudo cp arch/x86/boot/bzImage /root/bzImage-4.19.0-uos
|
|
|
|
Setting up AGLs
|
|
===============
|
|
|
|
#. Download the AGL Funky Flounder image::
|
|
|
|
$ sudo su
|
|
# cd /root
|
|
# wget https://download.automotivelinux.org/AGL/release/flounder/6.0.2/intel-corei7-64/deploy/images/intel-corei7-64/agl-demo-platform-crosssdk-intel-corei7-64-20181112133144.rootfs.wic.xz
|
|
|
|
# unxz agl-demo-platform-crosssdk-intel-corei7-64-20181112133144.rootfs.wic.xz
|
|
# cp agl-demo-platform-crosssdk-intel-corei7-64-20181112133144.rootfs.wic agl-ivi.wic
|
|
# cp agl-demo-platform-crosssdk-intel-corei7-64-20181112133144.rootfs.wic agl-rse.wic
|
|
|
|
|
|
#. Set up the AGL images::
|
|
|
|
# losetup -f -P --show agl-ivi.wic
|
|
# mount /dev/loop0p2 /mnt
|
|
# cp -r /lib/modules/4.19.0-uos /mnt/lib/modules/
|
|
# sync
|
|
# umount /mnt
|
|
# losetup -f -P --show agl-rse.wic
|
|
# mount /dev/loop1p2 /mnt
|
|
# cp -r /lib/modules/4.19.0-uos /mnt/lib/modules/
|
|
# sync
|
|
# umount /mnt
|
|
|
|
|
|
#. Create the ``launch_ivi.sh`` script for the AGL IVI VM (e.g., with vi) with
|
|
the following content::
|
|
|
|
#!/bin/bash
|
|
function launch_agl()
|
|
{
|
|
vm_name=vm$1
|
|
|
|
#check if the vm is running or not
|
|
vm_ps=$(pgrep -a -f acrn-dm)
|
|
result=$(echo $vm_ps | grep "${vm_name}")
|
|
if [[ "$result" != "" ]]; then
|
|
echo "$vm_name is running, can't create twice!"
|
|
exit
|
|
fi
|
|
|
|
# create a unique tap device for each VM
|
|
tap=tap2
|
|
tap_exist=$(ip a | grep "$tap" | awk '{print $1}')
|
|
if [ "$tap_exist"x != "x" ]; then
|
|
echo "tap device existed, reuse $tap"
|
|
else
|
|
ip tuntap add dev $tap mode tap
|
|
fi
|
|
|
|
# if acrn-br0 exists, add VM's unique tap device under it
|
|
br_exist=$(ip a | grep acrn-br0 | awk '{print $1}')
|
|
if [ "$br_exist"x != "x" -a "$tap_exist"x = "x" ]; then
|
|
echo "acrn-br0 bridge aleady exists, adding new tap device to it..."
|
|
ip link set "$tap" master acrn-br0
|
|
ip link set dev "$tap" down
|
|
ip link set dev "$tap" up
|
|
fi
|
|
|
|
#for memsize setting
|
|
mem_size=2048M
|
|
|
|
acrn-dm -A -m $mem_size -c $2 -s 0:0,hostbridge -s 1:0,lpc -l com1,stdio \
|
|
-s 2,pci-gvt -G "$3" \
|
|
-s 5,virtio-console,@pty:pty_port \
|
|
-s 6,virtio-hyper_dmabuf \
|
|
-s 3,virtio-blk,/root/agl_ivi.wic \
|
|
-s 4,virtio-net,$tap \
|
|
-s 7,xhci,1-4 \
|
|
-k /root/bzImage-4.19.0-uos \
|
|
-B "root=/dev/vda2 rw rootwait maxcpus=$2 nohpet console=tty0 console=hvc0 \
|
|
console=ttyS0 no_timer_check ignore_loglevel log_buf_len=16M \
|
|
consoleblank=0 tsc=reliable i915.avail_planes_per_pipe=$4 \
|
|
i915.enable_hangcheck=0 i915.nuclear_pageflip=1 i915.enable_guc_loading=0 \
|
|
i915.enable_guc_submission=0 i915.enable_guc=0" $vm_name
|
|
}
|
|
|
|
|
|
# offline SOS CPUs except BSP before launch UOS
|
|
for i in `ls -d /sys/devices/system/cpu/cpu[2-99]`; do
|
|
online=`cat $i/online`
|
|
idx=`echo $i | tr -cd "[2-99]"`
|
|
echo cpu$idx online=$online
|
|
if [ "$online" = "1" ]; then
|
|
echo 0 > $i/online
|
|
echo $idx > /sys/class/vhm/acrn_vhm/offline_cpu
|
|
fi
|
|
done
|
|
|
|
launch_agl 1 1 "64 448 8" 0x000F00 agl
|
|
|
|
#. Create the ``launch_rse.sh`` script for the AGL RSE VM with this
|
|
content::
|
|
|
|
#!/bin/bash
|
|
|
|
function launch_agl()
|
|
{
|
|
vm_name=vm$1
|
|
|
|
#check if the vm is running or not
|
|
vm_ps=$(pgrep -a -f acrn-dm)
|
|
result=$(echo $vm_ps | grep "${vm_name}")
|
|
if [[ "$result" != "" ]]; then
|
|
echo "$vm_name is running, can't create twice!"
|
|
exit
|
|
fi
|
|
|
|
|
|
# create a unique tap device for each VM
|
|
tap=tap1
|
|
|
|
tap_exist=$(ip a | grep "$tap" | awk '{print $1}')
|
|
if [ "$tap_exist"x != "x" ]; then
|
|
echo "tap device existed, reuse $tap"
|
|
else
|
|
ip tuntap add dev $tap mode tap
|
|
fi
|
|
|
|
|
|
# if acrn-br0 exists, add VM's unique tap device under it
|
|
|
|
br_exist=$(ip a | grep acrn-br0 | awk '{print $1}')
|
|
if [ "$br_exist"x != "x" -a "$tap_exist"x = "x" ]; then
|
|
echo "acrn-br0 bridge aleady exists, adding new tap device to it..."
|
|
ip link set "$tap" master acrn-br0
|
|
ip link set dev "$tap" down
|
|
ip link set dev "$tap" up
|
|
fi
|
|
|
|
#for memsize setting
|
|
mem_size=2048M
|
|
|
|
|
|
acrn-dm -A -m $mem_size -c $2 -s 0:0,hostbridge -s 1:0,lpc -l com1,stdio \
|
|
-s 2,pci-gvt -G "$3" \
|
|
-s 5,virtio-console,@pty:pty_port \
|
|
-s 6,virtio-hyper_dmabuf \
|
|
-s 3,virtio-blk,/root/agl_rse.wic \
|
|
-s 4,virtio-net,tap1 \
|
|
-s 7,xhci,1-5 \
|
|
-k /root/bzImage-4.19.0-uos \
|
|
-B "root=/dev/vda2 rw rootwait maxcpus=$2 nohpet console=tty0 console=hvc0 \
|
|
console=ttyS0 no_timer_check ignore_loglevel log_buf_len=16M \
|
|
consoleblank=0 tsc=reliable i915.avail_planes_per_pipe=$4 \
|
|
i915.enable_hangcheck=0 i915.nuclear_pageflip=1 i915.enable_guc_loading=0 \
|
|
i915.enable_guc_submission=0 i915.enable_guc=0" $vm_name
|
|
}
|
|
|
|
|
|
# offline SOS CPUs except BSP before launch UOS
|
|
for i in `ls -d /sys/devices/system/cpu/cpu[2-99]`; do
|
|
online=`cat $i/online`
|
|
idx=`echo $i | tr -cd "[2-99]"`
|
|
echo cpu$idx online=$online
|
|
if [ "$online" = "1" ]; then
|
|
echo 0 > $i/online
|
|
echo $idx > /sys/class/vhm/acrn_vhm/offline_cpu
|
|
fi
|
|
done
|
|
|
|
launch_agl 2 1 "64 448 8" 0x070000 agl
|
|
|
|
|
|
#. Launch the AGL IVI VM::
|
|
|
|
# chmod a+x launch_ivi.sh
|
|
# ./launch_ivi.sh
|
|
|
|
#. Settings for the IVI screen
|
|
|
|
After booting, the IVI image will be accessible via the console.
|
|
Login as root, and use an editor to modify ``/etc/xdg/weston/weston.ini``
|
|
to change the ``[output]`` orientation as shown below.
|
|
|
|
.. code-block:: none
|
|
:emphasize-lines: 11-13
|
|
|
|
[core]
|
|
shell=ivi-shell.so
|
|
backend=drm-backend.so
|
|
require-input=false
|
|
modules=systemd-notify.so
|
|
|
|
# A display is connected to HDMI-A-1 and needs to be rotated 90 degrees
|
|
# to have a proper orientation of the homescreen. For example, the 'eGalax'
|
|
# display used in some instances.
|
|
|
|
[output]
|
|
name=HDMI-A-1
|
|
transform=270
|
|
|
|
[id-agent]
|
|
default-id-offset=1000
|
|
|
|
[ivi-shell]
|
|
ivi-input-module=ivi-input-controller.so
|
|
ivi-module=ivi-controller.so
|
|
id-agent-module=simple-id-agent.so
|
|
|
|
[shell]
|
|
locking=true
|
|
panel-position=none
|
|
|
|
.. note:: Reboot for the changes to take affect.
|
|
|
|
#. Launch the AGL RSE VM
|
|
|
|
Open a new terminal::
|
|
|
|
$ sudo su
|
|
# cd /root
|
|
# chmod a+x launch_rse.sh
|
|
# ./launch_rse.sh
|
|
|
|
#. Settings for the RSE screen
|
|
|
|
After booting, the RSE image will be accessible via the console.
|
|
Login as root, and use an editor to modify ``/etc/xdg/weston/weston.ini``
|
|
to change the ``[output]`` orientation as shown below.
|
|
|
|
.. code-block:: none
|
|
:emphasize-lines: 11-13
|
|
|
|
[core]
|
|
shell=ivi-shell.so
|
|
backend=drm-backend.so
|
|
require-input=false
|
|
modules=systemd-notify.so
|
|
|
|
# A display is connected to HDMI-A-3 and needs to be rotated 90 degrees
|
|
# to have a proper orientation of the homescreen. For example, the 'eGalax'
|
|
# display used in some instances.
|
|
|
|
[output]
|
|
name=HDMI-A-3
|
|
transform=270
|
|
|
|
[id-agent]
|
|
default-id-offset=1000
|
|
|
|
[ivi-shell]
|
|
ivi-input-module=ivi-input-controller.so
|
|
ivi-module=ivi-controller.so
|
|
id-agent-module=simple-id-agent.so
|
|
|
|
[shell]
|
|
locking=true
|
|
panel-position=none
|
|
|
|
.. note:: Reboot for the changes to take affect.
|
|
|
|
Congratulations! You've successfully launch the demo system. It should
|
|
look similar to :numref:`agl-demo-setup` at the beginning of this
|
|
document. AGL as IVI and RSE work independently on top
|
|
of ACRN and you can interact with them via the touch screen.
|