245 lines
9.0 KiB
ReStructuredText
245 lines
9.0 KiB
ReStructuredText
.. _acrn-dm_parameters:
|
|
|
|
Device Model Parameters
|
|
#######################
|
|
|
|
Hypervisor Device Model (DM) is a QEMU-like application in the Service
|
|
OS (SOS) responsible for creating a UOS VM and then performing devices
|
|
emulation based on command line configurations, as introduced in
|
|
:ref:`hld-devicemodel`.
|
|
|
|
Here are descriptions for each of these ``acrn-dm`` command line parameters:
|
|
|
|
.. list-table::
|
|
:widths: 22 78
|
|
:header-rows: 0
|
|
|
|
* - :kbd:`-A, --acpi`
|
|
- Create ACPI tables.
|
|
With this option, DM will build an ACPI table into its VMs F-Segment
|
|
(0xf2400). This ACPI table includes full tables for RSDP, RSDT, XSDT,
|
|
MADT, FADT, HPET, MCFG, FACS, and DSDT. All these items are programmed
|
|
according to acrn-dm command line configuration and derived from their
|
|
default value.
|
|
|
|
* - :kbd:`-B, --bootargs <bootargs>`
|
|
- Set the UOS kernel command line arguments.
|
|
The maximum length is 1023.
|
|
The bootargs string will be passed to the kernel as its cmdline.
|
|
|
|
Example::
|
|
|
|
-B "loglevel=7"
|
|
|
|
specifies the kernel log level at 7
|
|
|
|
* - :kbd:`-c, --ncpus <cpus>`
|
|
- Set number of CPUs for UOS. This number is an integer and must not be
|
|
more than the total number of CPUs in the system, minus one (which is
|
|
used by the SOS).
|
|
|
|
* - :kbd:`--enable_trusty`
|
|
- Enable trusty for guest.
|
|
For Android guest OS, ACRN provides a VM environment with two worlds:
|
|
normal world and trusty world. The Android OS runs in the the normal
|
|
world. The trusty OS and security sensitive applications runs in the
|
|
trusty world. The trusty world can see the memory of normal world but
|
|
not vice versa. See :ref:`trusty_tee` for more information.
|
|
|
|
By default, the trusty world is disabled. Use this option to enable it.
|
|
|
|
* - :kbd:`-G, --gvtargs <GVT_args>`
|
|
- ACRN implements GVT-g for graphics virtualization (aka AcrnGT). This
|
|
option allows you to set some of its parameters.
|
|
|
|
GVT_args format: ``gvt_high_gm_sz gvt_low_gm_sz gvt_fence_sz``
|
|
|
|
Where:
|
|
|
|
- ``gvt_high_gm_sz``: GVT-g aperture size, unit is MB
|
|
- ``gvt_low_gm_sz``: GVT-g hidden gfx memory size, unit is MB
|
|
- ``gvt_fence_sz``: the number of fence registers
|
|
|
|
Example::
|
|
|
|
-G "10 128 6"
|
|
|
|
sets up 10Mb for GVT-g aperture, 128M for GVT-g hidden
|
|
memory, and 6 fence registers.
|
|
|
|
* - :kbd:`-h, --help`
|
|
- Show a summary of commands.
|
|
|
|
* - :kbd:`-i, --ioc_node <ioc_mediator_parameters>`
|
|
- IOC (IO Controller) is a bridge of an SoC to communicate with Vehicle Bus.
|
|
It routes Vehicle Bus signals, for example extracted from CAN messages,
|
|
from IOC to the SoC and back, as well as controlling the onboard
|
|
peripherals from SoC. (The ``-i`` and ``-l`` parameters are only
|
|
available on a platform with IOC.)
|
|
|
|
IOC DM opens ``/dev/ptmx`` device to create a peer PTY devices, IOC DM uses
|
|
these to communicate with UART DM since UART DM needs a TTY capable
|
|
device as its backend.
|
|
|
|
The device model configuration command syntax for IOC mediator is::
|
|
|
|
-i,[ioc_channel_path],[wakeup_reason]
|
|
-l,[lpc_port],[ioc_channel_path]
|
|
|
|
- ``ioc_channel_path`` is an absolute path for communication between IOC
|
|
mediator and UART DM.
|
|
- ``lpc_port`` is com1 or com2. IOC mediator needs one unassigned lpc
|
|
port for data transfer between User OS and Service OS.
|
|
- ``wakeup_reason`` is IOC mediator boot up reason, where each bit represents
|
|
one wakeup reason.
|
|
|
|
Currently the wakeup reason bits supported by IOC firmware are:
|
|
|
|
- ``CBC_WK_RSN_BTN`` (bit 5): ignition button.
|
|
- ``CBC_WK_RSN_RTC`` (bit 9): RTC timer.
|
|
- ``CBC_WK_RSN_DOR`` (bit 11): Car door.
|
|
- ``CBC_WK_RSN_SOC`` (bit 23): SoC active/inactive.
|
|
|
|
As an example, the following commands are used to enable IOC feature, the
|
|
initial wakeup reason is ignition button, and cbc_attach uses ttyS1 for
|
|
TTY line discipline in UOS::
|
|
|
|
-i /run/acrn/ioc_$vm_name,0x20
|
|
-l com2,/run/acrn/ioc_$vm_name
|
|
|
|
* - :kbd:`-k, --kernel <kernel_image_path>`
|
|
- Set the kernel (full path) for the UOS kernel. The maximum path length is
|
|
1023 characters. The DM handles bzImage image format.
|
|
|
|
usage: ``-k /path/to/your/kernel_image``
|
|
|
|
* - :kbd:`-l, --lpc <lpc_device_configuration>`
|
|
- (See :kbd:`-i, --ioc_node`)
|
|
|
|
* - :kbd:`-m, --memsize <memory_size>`
|
|
- Setup total memory size for UOS.
|
|
|
|
memory_size format is: "<size>{K/k, B/b, M/m, G/g}", and size is an
|
|
integer.
|
|
|
|
usage: ``-m 4g``: set UOS memory to 4 gigabytes.
|
|
|
|
* - :kbd:`-p, --pincpu <vcpu:hostcpu>`
|
|
- Pin host CPU to appointed vCPU:
|
|
|
|
- ``vcpu`` is the ID of the CPU seen by the UOS, and
|
|
- ``hostcpu`` is the physical CPU ID on the system.
|
|
|
|
Example: ``-p "1:2"`` means pin the 2nd physical cpu to 1st vcpu in UOS
|
|
|
|
* - :kbd:`--ptdev_no_reset`
|
|
- Disable reset check for pci device.
|
|
When assigning a PCI device as a passthrough device, we will reset it
|
|
first to get it to a valid device state. So if the device doesn't have
|
|
the reset capability, the passthrough will fail. The PCI device reset
|
|
can be disabled using this option.
|
|
|
|
* - :kbd:`-r, --ramdisk <ramdisk_image_path>`
|
|
- Set the ramdisk (full path) for the UOS. The maximum length is 1023.
|
|
The supported ramdisk format depends on your UOS kernel configuration.
|
|
|
|
usage: ``-r /path/to/your/ramdisk_image``
|
|
|
|
* - :kbd:`-s, --pci_slot <slot_config>`
|
|
- Setup PCI device configuration.
|
|
|
|
slot_config format is::
|
|
|
|
<bus>:<slot>:<func>,<emul>[,<config>]
|
|
<slot>[:<func>],<emul>[,<config>]
|
|
|
|
Where:
|
|
|
|
- ``slot`` is 0..31
|
|
- ``func`` is 0..7
|
|
- ``emul`` is a string describing the type of PCI device e.g. virtio-net
|
|
- ``config`` is an optional device-dependent string, used for
|
|
configuration.
|
|
|
|
Examples::
|
|
|
|
-s 7,xhci,1-2,2-2
|
|
|
|
This configuration means the virtual xHCI will appear in PCI slot 7
|
|
in UOS. Any physical USB device attached on 1-2 (bus 1, port 2) or
|
|
2-2 (bus 2, port 2) will be detected by UOS and be used as expected. To
|
|
determine which bus and port a USB device is attached, you could run
|
|
`lsusb -t` in SOS.
|
|
|
|
::
|
|
|
|
-s 9,virtio-blk,/root/test.img
|
|
|
|
This add virtual block in PCI slot 9 and use "/root/test.img" as the
|
|
disk image
|
|
|
|
* - :kbd:`-U, --uuid <uuid>`
|
|
- Set UUID for a VM.
|
|
Every VM is identified by a UUID. You can define that UUID with this
|
|
option. If you don't use this option, a default one
|
|
("d2795438-25d6-11e8-864e-cb7a18b34643") will be used.
|
|
|
|
usage::
|
|
|
|
-u "42795636-1d31-6512-7432-087d33b34756"
|
|
|
|
set the newly created VM's UUID to "42795636-1d31-6512-7432-087d33b34756"
|
|
|
|
* - :kbd:`-v, --version`
|
|
- Show Device Model version
|
|
|
|
* - :kbd:`--vsbl <vsbl_file_path>`
|
|
- Virtual Slim bootloader (vSBL) is the virtual bootloader supporting
|
|
booting of the UOS on the ACRN hypervisor platform. The vSBL design is
|
|
derived from Slim Bootloader, which follows a staged design approach
|
|
that provides hardware initialization and launching a payload that
|
|
provides the boot logic.
|
|
|
|
The vSBL image is installed on the Service OS root filesystem by the
|
|
service-os bundle, in ``/usr/share/acrn/bios/``. In the current design,
|
|
the vSBL supports booting Android guest OS or Linux guest OS using the
|
|
same vSBL image. For Android VM, the vSBL will load and verify trusty OS
|
|
first, and trusty OS will then load and verify Android OS according to
|
|
Android OS verification mechanism.
|
|
|
|
usage::
|
|
|
|
--vsbl /usr/share/acrn/bios/VSBL.bin
|
|
|
|
uses ``/usr/share/acrn/bios/VSBL.bin`` as the vSBL image
|
|
|
|
* - :kbd:`--ovmf <ovmf_file_path>`
|
|
- Open Virtual Machine Firmware (OVMF) is an EDK II based project to enable
|
|
UEFI support for Virtual Machines.
|
|
|
|
ACRN currently does not support off-the-shelf OVMF builds targeted for
|
|
QEMU and KVM. This feature is still under development.
|
|
|
|
usage::
|
|
|
|
--ovmf <path to OVMF.fd>
|
|
|
|
uses ``OVMF.fd`` as the OVMF image
|
|
|
|
* - :kbd:`-W, --virtio_msix`
|
|
- This option forces virtio to use single-vector MSI.
|
|
By default, any virtio-based devices will use MSI-X as its interrupt
|
|
method. If you want to use single-vector MSI interrupt, you can do so
|
|
using this option.
|
|
|
|
* - :kbd:`-Y, --mptgen`
|
|
- Disable MPtable generation.
|
|
The MultiProcessor Specification (MPS) for the x86 architecture is an
|
|
open standard describing enhancements to both operating systems and
|
|
firmware that allows them to work with x86-compatible processors in a
|
|
multi-processor configuration. MPS covers Advanced Programmable
|
|
Interrupt Controller (APIC) architectures.
|
|
|
|
By default, DM will create the MPtable for you. Use this option to
|
|
disable it.
|