Launch script should be set to 'Disabled'/'Enabled' from webUI while
hv enabled/disabled the cpu sharing.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
- commit 69152647 ("hv: Use virtual APIC IDs for Pre-launched VMs")
enables virtual APIC IDs for pre-launched VMs thus xapic_phys is no
longer needed to force guest xAPIC to work in physical destination mode.
- HVC is not available in logical partition mode and "console=hvc0" should
be removed from guest Linux bootargs.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Modify the hpa start size value for logical_partition scenario to avoid
build issue, and make the memory size of pre-launched VM configurable.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
To keep align hypervisor source code for scenario config, need add
the 'severity' item tag into scenario config files.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently kata vm is supported in SDC scenario by default, both vm1
and kata vm would share pcpu id 3 for vcpu affinity even when cpu
sharing is not enabled.
Remove pcpu id 3 from vm1 in SDC scenario config xmls.
Tracked-On: #4286
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add missing 'ramdisk_mod' item tag of industry config xml for tgl-rvp.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add CONFIG_SERIAL_x in $(borad).config, this will help to output
console log and help new board debug.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Some VMs don't need pci-gvt args or or need specific configuration
for 'gvt_args' item tag, this patch changes from selectable behavior to
editable for 'gvt_args' item from webUI.
2. Modify the description for gvt_args item tag from launch config xmls.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For currently supported hardware such as KNL NUC, the scenario xml
file is not generated and the newly added non-contiguous variables
will not be present. This can lead to build issues. This patch adds
the second non-contiguous HPA variable to all supported hardware
for both logical_partition and hybrid modes. It also adds checks
to ensure that HPA2 is valid before using it while creating the
guest VM ve820.
Tracked-On: #4242
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need power off method, so modify 'poweroff_channel'
item in the launch config files that user could select them from webUI.
Tracked-On: #4212
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Some vm need mediator of 'virtio-console', so add 'console' item
into 'virtio_devices' leaf that user could edit them from webUI.
2. Add 'vuart0' item to enable/disable serial console emulation by
device model.
Tracked-On: #4186
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The patch adds acrn-config tool support for adding
non-continguous HPA allocations for pre-launched VMs
in hybrid scenario.
Tracked-On: #4217
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch modifies the python scripts in scenario,
board and vm-configuration to support,
1. Generation of seperate ve820 for each VM.
2. Ability to configure each VM's HPA from
acrn-config UI tool.
3. Non-contiguous HPAs for pre-launched VMs.
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Tracked-On: #4195
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. Use acrn-configure tool to generate xml files to support TGL
RVP board. You need make menuconfig as guide in github, and then
comiple as following:
make hypervisor BOARD_FILE=path/xxx.xml SCENARIO_FILE=path/yyy.xml
2. Also uos launch script can be generated by acrn-configure tool with the
uos luanch xml file
Tracked-On: #4181
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds ramdisk_mod tag to all supported boards and
logical partition, hybrid, industry and sdc xmls
Tracked-On: #4197
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
modify the description of usb xhci about the input format.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need mediator of 'virtio-net', so add 'virtio-network'
item into the launch config files that user could edit them from webUI.
Tracked-On: #4185
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
remov rootfs_dev and rootfs_img item and replace them with vritio-blk
item.
The format for virtio-blk:
[blk partition:][img path] e.g.: /dev/sda3:./a/b.img
For vbootloader of ovmf: [img path] e.g.:./a/b.img
Tracked-On: #4172
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Parse MMCFG base address value and store it to board config xml
as DEFAULT_PCI_MMCFG_BASE macro.
Tracked-On: #4173
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
In current implementation, we only support OVMF as vbootloader, so
set vbootloader attributes to readonly in related XMLs to avoid issues.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need USB xHCI mediator support, this patch add 'usb_xhci' item
to the launch config files that user can edit it from webUI.
Tracked-On: #4164
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need mediator of 'virtio-input', so add 'virtio-input' item
into the launch config files that user could edit them from webUI.
Tracked-On: #4163
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Support to config kata vm in webUI, this need to modify 'configurable' attribute
to '1' in vm item.
Tracked-On: 4145
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i7.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i5.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The DRHD_INFO section should be updated with the refinement patches for
parsing DMAR table.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The DRHDx_IGNORE should be defined to true when DRHD device BDF equal to
the given CONFIG_GPU_SBDF.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As vm3 for industry scenario was removed from scenario config, so
modify the uos id to proper id.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The VM2 of INDUSTRY scenario need 2 vCPUs for performance, so there would
be no available pCPU for VM3, need to remove VM3 for this scenario.
Tracked-On: #3925
Signed-off-by: Victor Sun <victor.sun@intel.com>
The previous method to handle ttyS info has an assumption that PCI
serial devices are all mmio type, this caused incorrect BDF info in
board XML file.
This patch fix this issue by dropping serial device BDF info and
replace it with IO type.
Tracked-On: #3900
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As the blkid info contains 'UUID' information, which easy to lead to
confuse with the vm 'UUID'. So refine the format for block device.
v1-v2:
1). align the style in BLOCK_DEVICE_INFO tag
2). add 'mmcblk1p3' in BLOCK_DEVICE_INFO tag
v2-v3:
1). correct the commit message.
2). refine the api of handle_block_dev
Tracked-On: #3754
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Correct the default settings of ipu/ipu_i2c device for apl-up2.
Tracked-On: #3863
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The audio and Wifi device info in apl-mrb config xmls is wrong, fix it.
Tracked-On: #3863
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. enable item check for acrn-dm args which set from webUI input.
2. remove 'cpu_num' tag from launch config xml.
v1-v2:
1). add method to check 'cpu_num'/'mem_size' in config xml.
v2-v3:
1). as 'vcpu_num' configured in scenario, the parameter for acrn-dm is no
longer needed, remove 'cpu_num' tag and its handler from launch config.
2). add 'poweroff_channel' tag for generic config.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Change i915.domain_plane_owners and i915.avail_planes_per_pipe for
hybrid scenario;because kvm based User vm will use PipeA.
Tracked-On: #3840
Signed-off-by: Victor Sun <victor.sun@intel.com>
The pcpu sharing for vm already enabled in master branch, acrn-config
tool for generating scenario config souce file should keep align with master branch.
1. Add 'vcpu_affinity' tag and its vaule in config xml.
2. Parse the 'vcpu_affinity' tag of value from config xml for generating vcpu_affinity.
v1-v2:
1). apl-up2-n3350 has two PCPUs, set appropriate value for vcpu_affinity.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Unify the data type for scenario item.
1. Unified the scenario item, the type modified from list to dictionary.
2. remove some unused function.
3. add 'pci_dev_num'/'pci_devs' to hybrid xml for future support.
Tracked-On: #3798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
align with sample launch script for Preempt-RT Linux, remove ethernet
device from config file.
v1-v2:
1). correct desc for ethernet device
Tracked-On: #3751
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
hvlog is for debug purpose and its address is board specific,
so remove the param in sos cmdline.
If user want to support hvlog in his own board, then he can add
the param in sos cmdline manually.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
ATOM-N3350 only has two cores, so we only support SDC and
logical_partition scenario.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Change default apl-up2 CPU support from ATOM-N3350 to ATOM-N4200.
For apl-up2 N3350 support, we will add another apl-up2-n3350 board xml.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
add launch sample xmls for acrn-config to generate launch scripts.
launch script will generated by acrn-config/launch_config tool,
acrn-config/launch_config need launch config xml as input.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1. grap 'ext4' rootfs, and store it as "BLOCK_DEVICE_INFO" tag
2. remove 'Tab' from app tools
3. add support to parse ' ' from scenario xml
v1-v2:
1). modify the board info "ROOT_DEVICE_INFO" -> "BLOCK_DEVICE_INFO"
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Reserve memory for hv sbuf to avoid its possible overwriting on kernel memory,
need to update the kernel param in corresponding config-xmls;
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
1. add $(board) xmls which generate by acrn-config/target
acrn-config/target/board_parser.py will generate native board
information and store to $(board).xml
then, acrn-config/board_config/board_cfg_gen.py will use the xml to
generate hypervisor/arch/x86/configs/$(board)/ source file and apply to
the local acrn-hypervisor
2. add $(scenario) xmls for acrn-config/scenario_config to config scenario
acrn-config/scenario_config/scenario_cfg_gen.py will parse scenario xmls and
generate hypervisor/scenarios/$(scenario) source file and apply to the
local acrn-hypervisor
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Wei Liu