The parameter of intel_pstate should be 'disable' instead of 'disabled'.
This patch fixes it.
Tracked-On: #4094
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The acrn vhm driver will convert all PCI configure space access to
PCI_CFG type, so the pci_emul_cfgaddr and pci_emul_cfgdata will nerver
be invoked. Remove these useless functions.
Tracked-On: #3999
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Lock should be held till all the mmap operations are done. This is to
avoid the mmap failure when multiple guests are created concurrently.
For example consider the following case in which vm1 and vm2 are
created by acrnd concurrently:
- vm1 is created with 4G+2M memory.
- 4G+2M memory is reserved in hugetlb now and vm1 continues to
allocate memory for the lowmem without lock held.
- 2G memory is allocated by vm1 for its lowmem, and 2G+2M memory
is available in hugetlb.
- At this time vm2 is created with 1G+2M memory. It finds that enough
memory is reserved (2G+2M), so it does not try to reserve more
memory.
- vm2 allocates some memory for its lowmem/highmem/ovmf.
- vm1 tries to allocate memory for its highmem/ovmf, the allocation
will fail. vm1 creation failed in this case.
Tracked-On: #3947
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The device model generating ACPI table use the old ASL
standard(version:20190816), then the iasl in clearlinux(version:31360)
is 20191018, it can't disassemble the ACPI table compiled by old
standard.
Tracked-On: #3933
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In function crb_reg_write() in tpm_rbc.c
'tpm_vdev->request_mutex' will potentially kept
in locked state after crb_reg_write() returns.
Tracked-On: #3825
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yadong Qi <yadong.qi@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Wrong NVMe bdf info of KBLNUC7i7DNH is modified by mistake; so change it back.
Tracked-On: #3827
Reviewed-by: binbin.wu@intel.com
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
In acrn_load_elf(), file pointer 'fp' is kept in
open state before exiting if 'load_elf32()' is executed,
this patch is to fix this bug.
Tracked-On: #3817
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
slot value should be checked in range before used to access
bi->slotinfo[].
Tracked-On: #3822
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
DIR handler is referenced after release, need to be adjusted before
released.
Tracked-On: #3821
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When removing node in list, list_foreach_safe will be safer than
LIST_FOREACH.
Tracked-On: #3778
Signed-off-by: Junhao Gao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
int snprintf(char *str, size_t size, const char *format, ...)
The functions snprintf() write at most size bytes (including the
terminating null byte('\0')) to str.
only when returned value of snprintf is non-negative and less than size,
the string has been completely written.
Tracked-On: #3789
Signed-off-by: Junhao Gao <junhao.gao@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The default script is for nvme passthrough to RT_LaaG; you can change it
to sata or using virtio_blk
Tracked-On: #3575
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: binbin.wu@intel.com; kaige.fu@intel.com
After Windows 10, version 1607, the cross-signed drivers are forbiden
to load when secure boot is enabled.
Details please refer to
https://docs.microsoft.com/en-us/windows-hardware/drivers/install/kernel-mode-code-signing-policy--windows-vista-and-later-
That means the kvm-guest-drivers-windows can't work when secure boot enabled.
So we found another windows virtio FE drivers from Oracle to resolve this issue
but have to change another subsystem vendor ID for the virtio BE services.
This patch introduces a new DM CMD line "--windows" to launch WaaG with Oracle virtio devices including
virtio-blk, virtio-net, virtio-input instead Redhat. It can make virtio-blk, virtio-net and virtio-input
devices work when WaaG enabling secure boot.
Tracked-On: #3583
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Currently, DM only access /sys/kernel/mm/hugepages/hugepages-2048kB/
entries according to its own huge page requirement. So it could have
following race issue:
DM1 DM2
read nr pages
read nr pages
write DM2 nr pages
write DM1 nr pages
Suppose we should write DM1 + DM2 nr page to kernel sysfs interface
to reserve enough huge page (DM1 + DM2). But actually only reserve
huge page requested by DM1. Which could trigger one VM can't boot.
We can easily hit this issue if we enable multiple UOS auto boot
because more than one VM are started at almost same time.
We add file lock to make sure huge page reserving in DM atomic.
Tracked-On: #3729
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
- GvtGopDxe: Fix crash if failed to get a valid mode
- GvtGopDxe: Enable GOP with parameters from vgt interface
- OvmfPkg/GvtGopDxe: Add GvtGopDxe skeleton driver
- Add back NVME support
- Update Readme.md
Tracked-On: #3700
Signed-off-by: Peter Fang <peter.fang@intel.com>
This patch is used to support multiple Event Ring Segment Table (ERST).
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch only changes some names of varaibles about Event Ring Segement
Table (ERST), and doesn't modify any code logic.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The Windows 10 feeds back quicker than Linux OS when error occured
due to device disconnecting, it will quickly reset the xHCI controller
before the DM starts to emulate disconnect event and it may cause some
unexpected errors such as crash.
This patch will do one more check when error happens, if the error
is induced by device disconnecting, the DM will not report error and
just wait until the disconnect event is reported to the guest. This
change could produce the correct hehavior as we expected.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The block count of the struct usb_xfer is hard coded by the macro
USB_MAX_XFER_BLOCKS (1024), it wastes memory if 1024 blocks are
allocated for low speed transfer such as control transfer or interrupt
transfer. This patch introduces a new method to allocate different
number of blocks according to different endpoint type.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The overrun and underrun event are used in the timing control machanism,
this patch is used to implement this feature.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The Block Event Interrupt (BEI) bit in the TRB descriptor could
delay the triggering of interrupt. For most OSes, the native
driver for xHCI will use this bit to optimize the IO performence,
due to reduction of number of interrupts.
But in Linux, the native xHCI driver for Intel brand controller
doesn't use this bit. It is fine for the native scenario due to
most work is completed by hardware. But in virtualization scenario,
it is almost impossible to support heavy data IO such as high
resolution video recording (ISOC transfer).
Hence, this issue is solved by a 'quirk' when the intel hardware is
emulated (when vendor id is set as 0x8086). For other cases, a
virtal hardware called 'ACRN xHCI' is emulated, and both Linux and
Windows will use BEI bit by default.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The old logic to emulate MFINDEX register is not right, this patch
is used to fix it.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Just changed the name of the variable and didn't change any emulation
code logic.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the struct usb_block, there are some fields such as 'ccs',
'streamid', which should not be seen in the USB layer. This
patch intruduces new struct xhci_block to include the variables
for xHCI emulation.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When control transfer is detected and an unnecessary reset of
struct usb_xfer is conducted. This behavior is not necessary
and this patch is used to remove it.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Introduce helper functions to make code shorter and cleaner.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In Windows OS, there are many non-data blocks (EVENT DATA) during the USB
data transfer process, which is very different from the Linux conterpart.
To support both OS, the data processing logic is changed with the help of
newly introduced enum usb_block_type.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the process of USB data transfer, there three kinds of data blocks:
a. Non data block, which contains some control information;
b. Partial data block, which contains part of a large data chunk;
c. Full data block, which contains a complete data chunk.
In previous implementation, the differences mentioned above are described
by the usb_block::chained. But the 'chained' is concept in the xHCI area
and should not appear in the USB layer. This patch introduces enum type
usb_block_type to replace the 'chained' field in struct usb_block.
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some names of functions and variables are long and not exact, this
patch is used to change them, no logic code are affected. The
changing included:
usb_data_xfer -> usb_xfer
usb_data_xfer_block -> usb_block
usb_xfer_blk_stat -> usb_block_stat
usb_data_xfer_append -> usb_block_append
USB_XFER_BLK_* -> USB_BLOCK_*
Tracked-On: #3628
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Remove the '-c' option from all scripts as it has been removed from
dm code.
Tracked-On: #3663
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Remove the guest cpu number option '-c', as the guest cpu number is
defined in hypervisor vm configuration file, and the number can be
return by vm_create().
Tracked-On: #3663
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we pre-define VM configuration statically in HV. So HV can create
vcpus instead of DM when VM create.
This patch get the created vcpu_num from HV. vm_create_vcpu can be
removed later if kernel can get vcpu_num correctly without
IC_CREATE_VCPU ioctl.
v4: Keep vm_create_vcpu in DM for compatbility. We might remove it when
kernel is ready.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
* Update the launch scripts provided as examples on how to launch a Zephyr,
VxWorks or Windows User VM to directly use the 'OVMF.fd' bios file installed
by default in '/usr/share/acrn/bios/'
* Remove the OVMF.fd that was kept under 'doc/tutorials' (no longer needed)
* Adapt the tutorials to reflect this change
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Adjust the 'launch_uos.sh' script used to start a LaaG User VM to user the
OVMF.fd bios file installed under /usr/share/acrn/bios. It currently points
at a file in the local folder but neither our instructions nor our installation
script file puts it in this location. That results in an error when you try
to launch it.
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
if RTVM, now we assume it can't be shutdown forcely by SOS, so
add check condition to avoid that.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
1. for post-launch general VM, like LaaG, the vUART is emulated in DM,
so the power off control channel is:
acrn-dm:pty[master <-> salve] <--> acrn-dm:vUART <--> UOS:vUART
2. for RTVM, like RT-Linux, the vUART is emulated in hypervisor layer,
so the control channel is:
acrn-dm <--> SOS:/dev/ttyS1 <--> Hypervisor <--> UOS:vUART.
So the settings in launch script are different.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
vuart can be used as communication channel between VMs;
here vuart used to control vm's power off flow; control command
is from SOS to UOS
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
for pty vuart operation will be commonly used by other module,
like pm-vuart: control UOS power off through vuart.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
We seperate the guest power event notify channel out. And now
it's required to give the guest power event notify channel
explicitly. Update the sample launch script to have correct
parameters.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Now, we have two ways to notify guest about power managment
event:
- ioc on MRB platforms
- ACPI power button on other platforms
And we hardcode which one is used now.
In coming change, we will add UART based guest notify method.
We add dm command option to select which method will be used
when launch UOS.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
For the code which forwards the native power button event to
guest, they are not related with guest pm related operation
emulation. Move this part of code out of pm.c. And will make
the power button as one possible method to notify guest about
the shutdown operation.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Remove the '-p' ("pincpu" option) from the help displayed when calling 'acrn-dm
-h'.
Tracked-On: #3600
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The patch fixes enumeration related issues introduced by commit 'fc3d19'.
Tracked-On: #3612
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Change hardcode of vcpu number to the real value when process VM's IO
request in DM, so we can handle all requests from different vcpus.
Tracked-On: #3425
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add subclass for virtio-console pci device. Without the subclass, the
device may be probed by 8250_pci serial driver, and lead to segment
fault in acrn-dm. This issue appears when running debian as Guest OS.
But there is a potential issue, if a new serial driver, which use class
and subclass same as virtio-console, the problem may still trigger. Need
to fix it case by case.
Tracked-On: #3615
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Kaige Fu