The current code uses a predefined sworld memory array to reserve memory
for trusty VMs, and assume all post launched VMs are trusty VM which is
not correct.
This patch statically reserved memory just for trusty VMs and save 16M
memory for every non trusty VM.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
The design of ACRN CPU performance management is to let hardware
do the autonomous frequency selection(or set to a fixed value),
and remove guest's ability to control CPU frequency.
This patch is to implement the CPU frequency initializer, which will
setup CPU frequency base on the performance policy type.
Two performance policy types are provided for user to choose from:
- 'Performance': CPU runs at its CPU runs at its maximum frequency.
Enable hardware autonomous frequency selection if HWP is presented.
- 'Nominal': CPU runs at its guaranteed frequency.
The policy type is passed to hypervisor through boot parameter, as
either 'cpu_perf_policy=Nominal' or 'cpu_perf_policy=Performance'.
The default type is 'Performance'.
Both HWP and ACPI p-state are supported. HWP is the first choice, for
it provides hardware autonomous frequency selection, while keeps
frequency transaction time low.
Two functions are added to the hypervisor to call:
- init_frequency_policy(): called by BSP at start up time. It processes
the boot parameters, and enables HWP if it is presented.
- apply_frequency_policy(): called after init_frequency_policy().
It applies initial CPU frequency policy setting for each core. It
uses a set of frequency limits data struct to quickly decide what the
highest/nominal frequency is. The frequency limits are generated by
config-tools.
The hypervisor will not be governing CPU frequency after initial policy
is applied.
Cores running RTVMs are fixed to nominal/guaranteed frequency, to get
more certainty in latency. This is done by setting the core's frequency
limits to highest=lowest=nominal in config-tools.
Tracked-On: #8168
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add hypercall to add/remove asyncio request info. Hv will record the
info in a list, and when a new ioreq is come, hv will check if it is
in the asyncio list, if yes, queue the fd to asyncio buffer.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current IO emulation is synchronous. The user VM need to wait for the
completion of the the I/O request before return. But Virtio Spec
introduces introduces asynchronous IO with a new register in MMIO/PIO
space named NOTIFY, to be used for FE driver to notify BE driver, ACRN
hypervisor can emulate this register by sending a notification to vCPU
in Service VM side. This way, FE side can resume to work without waiting
for the full completion of BE side response.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Extend sbuf hypercall to support other kinds of share buffer.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Improve SMP call to support ACRN shell to operate RTVM.
before, the RTVM CPU can't be kicked off by notification IPI,
so some shell commands can't support it, like rdmsr/wrmsr,
memory/registers dump. So INIT will be used for RTVM, which
LAPIC is pass-thru.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
By default, notification IPI used to kick sharing pCPU, INIT
used to kick partition pCPU. If USE_INIT_IPI flag is passed to
hypervisor, only INIT will be used to kick pCPU.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
INIT signal has been used to kick off the partitioned pCPU, like RTVM,
whose LAPIC is pass-through. notification IPI is used to kick off
sharing pCPU.
Add mode_to_kick_pcpu in per-cpu to control the way of kicking
pCPU.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The design of ACRN CPU performance management is to let hardware
do the autonomous frequency selection(or set to a fixed value),
and remove guest's ability to control CPU frequency.
This patch is to remove guest's ability to control CPU frequency by
removing the guests' HWP/EIST CPUIDs and blocking the related MSR
accesses. Including:
- Remove CPUID.06H:EAX[7..11] (HWP)
- Remove CPUID.01H:ECX[7] (EIST)
- Inject #GP(0) upon accesses to MSR_IA32_PM_ENABLE,
MSR_IA32_HWP_CAPABILITIES, MSR_IA32_HWP_REQUEST,
MSR_IA32_HWP_STATUS, MSR_IA32_HWP_INTERRUPT,
MSR_IA32_HWP_REQUEST_PKG
- Emulate MSR_IA32_PERF_CTL. Value written to MSR_IA32_PERF_CTL
is just stored for reading. This is like how the native
environment would behavior when EIST is disabled from BIOS.
- Emulate MSR_IA32_PERF_STATUS by filling it with base frequency
state. This is consistent with Windows, which displays current
frequency as base frequency when running in VM.
- Hide the IA32_MISC_ENABLE bit 16 (EIST enable) from guests.
This bit is dependent to CPUID.01H:ECX[7] according to SDM.
- Remove CPID.06H:ECX[0] (hardware coordination feedback)
- Inject #GP(0) upon accesses to IA32_MPERF, IA32_APERF
Also DM do not need to generate _PSS/_PPC for post-launched VMs
anymore. This is done by letting hypercall HC_PM_GET_CPU_STATE sub
command ACRN_PMCMD_GET_PX_CNT and ACRN_PMCMD_GET_PX_DATA return (-1).
Tracked-On: #8168
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
HPET is used to calibrate the tsc frequency if system fails to
get the accurate frequency from CPUID 0x15. But on some platforms
(for example: the emulated ACRN on QEMU) HPET is not started
by default, which causes the failure of calibration TSC by HPET.
Tracked-On: #8113
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to improve DX, 'DISABLED' style configurator settings are
changed to 'ENABLED' style. The meaning of the MACROs are reversed,
so in the hv code we have to change '#ifndef' -> '#ifdef' or
'#ifdef' -> '#ifndef'.
Including:
- MCE_ON_PSC_DISABLED -> MCE_ON_PSC_ENABLED
- ENFORCE_TURNOFF_AC -> SPLIT_LOCK_DETECTION_ENABLED
- ENFORCE_TURNOFF_GP -> UC_LOCK_DETECTION_ENABLED
Tracked-On: #7661
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
1. make memcpy_erms as a public API; add a new one
memcpy_erms_backwards, which supports to copy data from tail to head.
2. improve to use right/left/home/end key to move cursor, and support
delete/backspace key to modify current input command.
Tracked-On: #7931
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When LAPIC timer is working in oneshot or periodic mode, OS uses
initial counter register/current counter register to program
a timer. Both initial counter and current counter depend on the
LAPIC frequency. ACRN emulated vLAPIC timer based on the TSC.
vLAPIC freq is the same as TSC freq.
Tracked-On: #7876
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
For platform that supports RRSBA (Restricted Return Stack Buffer
Alternate), using retpoline may not be sufficient to guard against branch
history injection or intra-mode branch target injection. RRSBA must
be disabled to prevent CPUs from using alternate predictors for RETs.
Quoting Intel CVE-2022-0001/CVE-2022-0002:
Where software is using retpoline as a mitigation for BHI or intra-mode BTI,
and the processor both enumerates RRSBA and enumerates RRSBA_DIS controls,
it should disable this behavior.
...
Software using retpoline as a mitigation for BHI or intra-mode BTI should use
these new indirect predictor controls to disable alternate predictors for RETs.
See: https://www.intel.com/content/www/us/en/developer/articles/technical/
software-security-guidance/technical-documentation/branch-history-injection.html
Tracked-On: #7907
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
TLFS defined 2 vMSRs which can be used by Windows guest to get the
TSC/APIC frequencies from hypervisor. This patch adds the support
of HV_X64_MSR_TSC_FREQUENCY/HV_X64_MSR_APIC_FREQUENCY vMSRS whose
availability is exposed by CPUID.0x40000003:EAX[bit11] and EDX[bit8].
v1->v2:
- revise commit message to highlight that the changes are for WaaG
Tracked-On: #7876
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
On some platforms CPUID.0x15:ECX is zero and CPUID.0x16 can
only return the TSC frequency in MHZ which is not accurate.
For example the TSC frequency obtained by CPUID.0x16 is 2300
MHZ and the TSC frequency calibrated by HPET is 2303.998 MHZ
which is much closer to the actual TSC frequency 2304.000 MHZ.
This patch adds the support of using HPET to calibrate TSC
when HPET is available and CPUID.0x15:ECX is zero.
v3->v4:
- move calc_tsc_by_hpet into hpet_calibrate_tsc
v2->v3:
- remove the NULL check in hpet_init
- remove ""& 0xFFFFFFFFU" in tsc_read_hpet
- add comment for the counter wrap in the low 32 bits in
calc_tsc_by_hpet
- use a dedicated function for hpet_calibrate_tsc
v1->v2:
- change native_calibrate_tsc_cpuid_0x15/0x16 to
native_calculate_tsc_cpuid_0x15/0x16
- move hpet_init to BSP init
- encapsulate both HPET and PIT calibration to one function
- revise the commit message with an example"
Tracked-On: #7876
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
As mentioned in previous patch, wbinvd utilizes the vcpu_make_request
and signal_event call pair to stall other vcpus. Due to the fact that
these two calls are not thread-safe, we need to avoid concurrent call to
this API pair.
This patch adds wbinvd lock to serialize wbinvd emulation.
Tracked-On: #7887
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Commit d575edf79a changes the internal
implementation of wait_event and signal_event to use a counter instead
of a boolean value.
The background was:
ACRN utilizes vcpu_make_request and signal_event pair to shoot down
other vcpus and let them wait for signals. vcpu_make_request eventually
leads to target vcpu calling wait_event.
However vcpu_make_request/signal_event pair was not thread-safe,
and concurrent calls of this pair of API could lead to problems.
One such example is the concurrent wbinvd emulation, where vcpus may
concurrently issue vcpu_make_request/signal_event to synchronize wbinvd
emulation.
d575edf commit uses a counter in internal implementation of
wait_event/signal_event to avoid data races.
However by using a counter, the wait/signal pair now carries semantics of
semaphores instead of events. Semaphores require caller to carefully
plan their calls instead of multiply signaling any number of times to the same
event, which deviates from the original "event" semantics.
This patch changes the API implementation back to boolean-based, and
re-resolve the issue of concurrent wbinvd in next patch.
This also partially reverts commit 10963b04d1,
which was introduced because of the d575edf.
Tracked-On: #7887
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If multiple control fields in GCMD_REG register need to be modified, software
must serialize the modifications through multiple writes to this register.
So one-shot bits (bits 30-29, 27 and 24) in gcmd should not been set.
Otherwise, other control field may be written to GCMD_REG at the same time
with one-shot bit (Clearing one-shot bit has no effect, software sets this field
would set/update this control field used by hardware).
Tracked-On: #7381
Signed-off-by: Fei Li <fei1.li@intel.com>
There is an issue of calculate 2^n roundup of CONFIG_MAX_PT_IRQ_ENTRIES,
and the code style is very ugly when we use macro to fix it.
So this patch move MAX_IR_ENTRIES to offline tool which could do align
check and calculate it automatically.
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
when SSRAM regions are assigned to service VM
to support virtulization of SSRAM for post-launched
RTVMs, service VM need to access all SSRAM regions
for management, typically, service VM does data
cleanup in SSRAM region when it is reclaimed from
a shutdown RTVM.
This patch update memory type from UC(by default)
to WB, else SSARM region will be evicted when access
from guest happens.
Tracked-On: #7425
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
When booting prelaunch RTVM with SSRAM enabled, we need to delete the
SSRAM region that is used by prelaunch RTVM from Service VM EPT mapping.
If it is not used, or it is not fully used, the SSRAM or the rest SSRAM
should be in Service VM map.
But current code has a issue that it always deletes all SSRAM region
from Service VM EPT, even when no SSRAM is enabled for prelaunch RTVM.
This could cause the post RTVM with SSRAM boot failure, as DM checks and
removes SSRAM region from Service VM EPT during post RTVM setup.
Changing get_software_sram_size() to PRE_RTVM_SW_SRAM_MAX_SIZE could
solve the issue, as PRE_RTVM_SW_SRAM_MAX_SIZE is the SSRAM size that
prelaunch RTVM actually uses.
Tracked-On: #7401
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
The movdqu instruction moves unaligned double quadword (128 bit)
contained in XMM registers.
This patch uses pointers as input parameters of the function
write_xmm_0_2() to get 128-bit value from 64-bit array for each XMM
register.
Tracked-On: #7380
Reviewed-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Jiang, Yanting <yanting.jiang@intel.com>
Since CAT support for hybrid platform is landed, let's remove some old declarations
which are no longer used.
Tracked-On: #6690
Signed-off-by: Tw <wei.tan@intel.com>
The current code only supports 2 HPA regions per VM.
This patch extended ACRN to support 2+ HPA regions per VM, to use host
memory better if it is scatted among multiple regions.
This patch uses an array to describe the hpa region for the VM, and
change the logic of ve820 to support multiple regions.
This patch dependent on the config tool and GPA SSRAM change
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
When CPUID executes with EAX set to 1AH, the processor returns information about hybrid capabilities.
This information is percpu related, and should be obtained directly from the physical cpu.
Tracked-On: #6899
Signed-off-by: Tw <wei.tan@intel.com>
Page table entry present check is page table type
specific and static, e.g. just need to check bit0
of page entry for entries of MMU page table and
bit2~bit0 for EPT page table case. hence no need to
check it by callback function every time.
This patch remove 'pgentry_present' callback field and
add a new bitmask field for this page entry present check.
It can get better performance especially when this
check is executed frequently.
Tracked-On: #7327
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
When CPUID executes with EAX set to 02H, the processor returns information about cache and TLB information.
This information is percpu related, and should be obtained directly from the physical cpu.
BTW, this patch is backported from v2.7 branch.
Tracked-On: #6931
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Using the SSRAM area size extracted by config_tools, the patch changes
the hard-coded GPA SSRAM area size to its actual size, so that
pre-launched VMs can support large(>8MB) SSRAM area.
When booting service VM, the SSRAM area has to be removed from Service
VM's mem space, because they are passed-through to the pre-rt VM. The
code was bugged since it was using the SSRAM area's GPA in the pre-rt
VM. Changed it to GPA in Service VM.
Tracked-On: #7212
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
On hybrid platform(e.g. ADL), there may be multiple instances of same level caches for different type of processors,
The current design only supports one global `rdt_info` for each RDT resource type.
In order to support hybrid platform, this patch introduce `rdt_ins` to represents the "instance".
Also, the number of `rdt_info` is dynamically generated by config-tool to match with physical board.
Tracked-On: projectacrn#6690
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
As RDT related information will be offered by config-tool dynamically,
and HV is just a consumer of that. So there's no need to do this detection
at startup anymore.
Tracked-On: projectacrn#6690
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Now HI_MMIO_xxx is duplicate with MMIO64_xxx. This patch replace HI_MMIO_xxx
with MMIO64_xxx.
Tracked-On: #6011
Signed-off-by: Fei Li <fei1.li@intel.com>
Unify the handling of host/guest MSR area in VMCS. Remove the emum value
as the element index when there are a few of MSRs in host/guest area.
Because the index could be changed if one element not used. So, use a
variable to save the index which will be used.
Tracked-On: #6966
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Requirement: in CPU partition VM (RTVM), vtune or perf can be used to
sample hotspot code path to tune the RT performance, It need support
PMU/PEBS (Processor Event Based Sampling). Intel TCC asks for it, too.
It exposes PEBS related capabilities/features and MSRs to CPU
partition VM, like RTVM. PEBS is a part of PMU. Also PEBS needs
DS (Debug Store) feature to support. So DS is exposed too.
Limitation: current it just support PEBS feature in VM level, when CPU
traps to HV, the performance counter will stop. Perf global control
MSR is used to do this work. So, the counters shall be close to native.
Tracked-On: #6966
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Add a flag: GUEST_FLAG_PMU_PASSTHROUGH to indicate if
PMU (Performance Monitor Unit) is passthrough to guest VM.
Tracked-On: #6966
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
NMI is used to notify LAPIC-PT RTVM, to kick its CPU into hypervisor.
But NMI could be used by system devices, like PMU (Performance Monitor
Unit). So use INIT signal as the partition CPU notification function, to
replace injecting NMI.
Also remove unused NMI as notification related code.
Tracked-On: #6966
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Now the vept module uses a mixture of nept and vept, it's better to
refine it.
So this patch rename nept to vept and simplify the interface of vept
init module.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
This patch adds ENOTTY and ENOSYS to indicate undefined and obsoleted
request hyercall respectively, and uses ENOTTY as error code for undefined
hypercall instead of EINVAL to consistent with the ACRN kernel's return
value.
Tracked-On: #7029
Signed-off-by: Wen Qian <qian.wen@intel.com>
Signed-off-by: Li Fei <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The coding guideline rule C-ST-04 requires that
a 'if' statement followed by one or more 'else if'
statement shall be terminated by an 'else' statement
which contains either appropriate action or a comment.
Tracked-On: #6776
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Now the vept table was allocate dynamically, but the table size of vept
was calculated by the CONFIG_PLATFORM_RAM_SIZE which was predefined by
config tool.
It's not complete change and can't support single binary for different
boards/platforms.
So this patch will replace the CONFIG_PLATFORM_RAM_SIZE and get the
top ram size from hv_E820 interface for vept.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
Now the EPT module use predefined parameter "CONFIG_PLATFORM_RAM_SIZE"
to calculate the ept table size.
After change the EPT table to dynamic allocate to support single binary
for different boards/platforms, the ept table size should dynamic
calculate too.
So this patch replace CONFIG_PLATFORM_RAM_SIZE by the hv_e820_ram_size
to get the RAM info on run time.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
CONFIG_PLATFORM_RAM_SIZE is predefined by config tool and mmu use it to
calculate the table size and predefine the ppt table.
This patch will change the ppt to allocate dynamically and get the table
size by the hv_e820_ram_size interface which could get the RAM
info on run time and replace the CONFIG_PLATFORM_RAM_SIZE.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
The e820 module could get the RAM info on run time, but the RAM size
and MAX address was limited by CONFIG_PLATFORM_RAM_SIZE which was
predefined by config tool.
Current solution can't support single binary for different boards or
platforms and the CONFIG_PLATFORM_RAM_SIZE can't matching the RAM size
if user have not update config tools setting after the device changed.
So this patch remove the CONFIG_PLATFORM_RAM_SIZE and calculate ram
size on run time.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
Sometimes the memory to be allocated is not at the end of an entry,
that means we have to break one enty into 2 smaller entries, there
are two ways to add the new entry to hv_e820, adds to the end or
insert it.
The initial e820 table is ordered, that's why the e820_alloc_memory
interface asssum all entries was sorted, but add new entry to the
end will break the orde of hv_e820.
So we use insert_e820_entry to replace the add_e820_entry, the new
interfeac will keep the orde and users do not need sort again after
alloc region
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei<chenli.wei@linux.intel.com>
HC_GET_PLATFORM_INFO hypercall is not supported anymore,
hence to remove related function and data structure definition.
Tracked-On: #6690
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Current mmu assum the high memory start from 4G,it's not true for some
platform.
The map logic use "high64_max_ram - 4G" to calculate the high ram size
without any check,it's an issue when the platform have no high memory.
So this patch add high64_min_ram variable to calculate the min address
of high memory and check the high64_min_ram to fix the previou issue.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
The current code would inject GP to guest, when there's no IWKeyBackup,
and the guest tried to write MSR MSR_IA32_COPY_PLATFORM_TO_LOCAL(0xd92)
to copy IWKeyBackup for the platform to the IWKey for this logical processor.
This patch fixes it by adjusting the code logic, and it'll do nothing
instead of inject GP if no valid IWKeyBackup.
This patch alse add checking for the value being written to avoid setting
reserved MSR bits.
Tracked-On: #7018
Signed-off-by: Wen Qian <qian.wen@intel.com>
Signed-off-by: Li Fei <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Now the multiboot modules memory have not reserve,it's an issue if
these memory alloc and write before VM start.
Incorrect allocation of multiboot modules memory will cause VM lost
data or start faild.
So we find these modules memory range and reserve these memory from
e820 entry.
All these memory will realloc to VM which own them before the vm start.
Tracked-On: #6690
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Chenli Wei