sbuf is now only used for debug purpose, but later, it will be used as a
common interfaces. So, move the sbuf related code out of the debug directory.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To avoid hardcoding the minimum "iasl" version in multiple places, IASL_MIN_VER
is defined in the top-level Makefile and is passed to config_tools.
This patch verifies "iasl" version against IASL_MIN_VER directly in
config_tools.
Tracked-On: #7880
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
At build time (on the *dev* machine), config_tools depends on "iasl" to
generate the binary of ACPI tables for pre-launched VMs.
This patch does:
- pass ASL_COMPILER to config_tools
By default, ASL_COMPILER is initialized by "which iasl" at build time.
User could override it by specifying ASL_COMPILER as the build option,
like below:
make BOARD=xxxx SCENARIO=yyyy ASL_COMPILER=/usr/local/bin/iasl
- use ASL_COMPILER as the path to the "iasl" compiler in config_tools
v1 -> v2:
- add a check to make sure ASL_COMPILER is initialized to a value
Tracked-On: #7880
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
The 'serial.conf' file need to be put in /etc/, but it is currently being
installed in $(libdir)/acrn/. We therefore ask the user to manually copy that
file over to the /etc/ folder. This patch fixes that by installing
'serial.conf' directly there.
Tracked-On: #7107
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
TEE is a secure VM which has its own partitioned resources while
REE is a normal VM which owns the rest of platform resources.
The TEE, as a secure world, it can see the memory of the REE
VM, also known as normal world, but not the other way around.
But please note, TEE and REE can only see their own devices.
So this patch does the following things:
1. go through physical e820 table, to ept add all system memory entries.
2. remove hv owned memory.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Generate serial configuration file for service VM according
to scenario file and vUART ports base address allocated by
config tool.
Currently, some non-standard serial ports are emulated in
hypervisor and will be used to do communication between service
VM and user VM, so need to generate serial configuration file
to configure these serial ports for service VM.
v1-->v2:
Fix some type issues
Refine script code format
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Initialize vCBM MSRs
Initialize vCLOSID MSR
Add some vCAT functions:
Retrieve max_vcbm and max_pcbm
Check if vCAT is configured or not for the VM
Map vclosid to pclosid
write_vclosid: vCLOSID MSR write handler
write_vcbm: vCBM MSR write handler
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch adds a new priority based scheduler to support
vCPU scheduling based on their pre-configured priorities.
A vCPU can be running only if there is no higher priority
vCPU running on the same pCPU.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Add a couple of missing dependencies in the ACRN Makefiles:
1. 'acrn.bin' is required before the hypervisor can be installed
2. The 'acrn_mngr.h' needs to be installed ('tools-install') in
the build folder.
Tracked-On: #6360
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This patch adds a function elf_loader() to load elf image.
It checks the elf header, get its 32/64 bit type, then calls
the corresponding loading routines, which are empty, and
will be realized later.
Tracked-On: #6323
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The patch splits the vm_load.c to three parts, the loader function of bzImage
kernel is moved to bzimage_loader.c, the loader function of raw image kernel
is moved to rawimage_loader.c, the stub is still stayed in vm_load.c to load
the corresponding kernel loader function. Each loader function could be
isolated by CONFIG_GUEST_KERNEL_XXX macro which generated by config tool.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Create virtual acpi table of tpm2 based on the raw data if the TPM2
device is presented and the passthrough tpm2 is enabled.
Refine the arguments of bin_gen.py. The --board and --scenario take the
path to the XMLs as the argument. The allocation.xml is needed for
bin_gen.py to generate tpm2 acpi table.
Refine the condition of tpm2_acpi_gen. The tpm2 device "MSFT0101" can be
present in device id or compatible_id(CID). Check both attributes and
child node of tpm2 device.
Tracked-On: #6320
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
ACRN used to prepare the vTPM2 ACPI Table for pre-launched VM at the build stage
using config tools. This is OK if the TPM2 ACPI Table never changes. However,
TPM2 ACPI Table may be changed in some conditions: change BIOS configuration or
update BIOS.
This patch do TPM2 fixup to update the vTPM2 ACPI Table and TPM2 MMIO resource
configuration according to the physical TPM2 ACPI Table.
Tracked-On: #6366
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
User could use make targz-pkg command to generate tar package in
build directory,which could help user simplify the process
of installing acrn hypervisor in target board. user need to copy the
tarball package to target board,and extract it to "/" directory.
Tracked-On: #6355
Signed-off-by: liu hang1 <hang1.liu@intel.com>
Reviewed-by: VanCutsem, Geoffroy <geoffroy.vancutsem@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Because the emulation code is for both split-lock and uc-lock,
rename splitlock.c/splitlock.h to lock_instr_emul.c/lock_instr_emul.h
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When hypervisor boot from efi environment, the efi memory layout should be
considered as main memory map reference for hypervisor use. This patch add
function that parses the efi memory descriptor entries info from efi memory
map pointer and stores the info into a static hv_memdesc[] array.
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Add a wrapper API init_acrn_boot_info() so that it could be used to boot
ACRN with any boot protocol;
Another change is change term of multiboot1 to multiboot because there is
no such term officially;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
invvpid and invept instructions cause VM exits unconditionally.
For initial support, we pass all the instruction operands as is
to the pCPU.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use BUILD_VERSION an BUILD_TAG variable also for hypervisor,
acrnprobe and crashlog. This eases build from an archive without
git available.
Tracked-On: #6035
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
Make builds reproducible by honoring SOURCE_DATE_EPOCH and USER
environment variables in the respective Makefiles. Just follow the
recommendations at https://reproducible-builds.org/
Build tools (e.g. Debian packaging, Yocto) use this to ensure reproducibility
of packages.
Tracked-On: #6035
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
Add virtual root port that supports the most basic pci-e bridge and root port operations.
- init_vroot_port(): init vroot_port's basic registers.
- deinit_vroot_port(): reset vroot_port
- read_vroot_port_cfg(): read from vroot_port's virtual config space.
- write_vroot_port_cfg(): write to vroot_port's virtual config space.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
x86/timer.[ch] was moved to the common directory largely unchanged.
x86 specific code now resides in x86/tsc_deadline_timer.c and its
interface was defined in hw/hw_timer.h. The interface defines two
functions: init_hw_timer() and set_hw_timeout() that provides HW
specific initialization and timer interrupt source.
Other than these two functions, the timer module is largely arch
agnostic.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Modules that use udelay() should include "delay.h" explicitly.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Generalize and split basic cpu cycle/tick routines from x86/timer:
- Instead of rdstc(), use cpu_ticks() in generic code.
- Instead of get_tsc_khz(), use cpu_tickrate() in generic code.
- Include "common/ticks.h" instead of "x86/timer.h" in generic code.
- CYCLES_PER_MS is renamed to TICKS_PER_MS.
The x86 specific API rdstc() and get_tsc_khz(), as well as TSC_PER_MS
are still available in arch/x86/tsc.h but only for x86 specific usage.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Signed-off-by: Yi Liang <yi.liang@intel.com>
Define LIST_OF_VMX_MSRS which includes a list of MSRs that are visible to
L1 guests if nested virtualization is enabled.
- If CONFIG_NVMX_ENABLED is set, these MSRs are included in
emulated_guest_msrs[].
- otherwise, they are included in unsupported_msrs[].
In this way we can take advantage of the existing infrastructure to
emulate these MSRs.
Tracked-On: #5923
Spick igned-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch adds the following dependencies among recipes:
- Building of any C file depends on $(HV_CONFIG_TIMESTAMP) which indicates
the presence of generated configuration files.
- Source files listed in $(VM_CFG_C_SRCS), which are the generated
configuration files, depends on $(HV_CONFIG_TIMESTAMP)
With the dependencies above, the build system can now safely be executed in
parallel, e.g. `make -j4`.
Tracked-On: #5874
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Each of them now resides in a separate .c file.
Tracked-On: #5825
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The common irq file is responsible for managing the central
irq_desc data structure and provides the following APIs for
host interrupt handling.
- init_interrupt()
- reserve_irq_num()
- request_irq()
- free_irq()
- set_irq_trigger_mode()
- do_irq()
API prototypes, constant and data structures belonging to common
interrupt handling are all moved into include/common/irq.h.
Conversely, the following arch specific APIs are added which are
called from the common code at various points:
- init_irq_descs_arch()
- setup_irqs_arch()
- init_interrupt_arch()
- free_irq_arch()
- request_irq_arch()
- pre_irq_arch()
- post_irq_arch()
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
For FuSa's case, we remove all dynamic memory allocation use in ACRN HV. Instead,
we use static memory allocation or embedded data structure. For pagetable page,
we prefer to use an index (hva for MMU, gpa for EPT) to get a page from a special
page pool. The special page pool should be big enougn for each possible index.
This is not a big problem when we don't support 64 bits MMIO. Without 64 bits MMIO
support, we could use the index to search addrss not larger than DRAM_SIZE + 4G.
However, if ACRN plan to support 64 bits MMIO in SOS, we could not use the static
memory alocation any more. This is because there's a very huge hole between the
top DRAM address and the bottom 64 bits MMIO address. We could not reserve such
many pages for pagetable mapping as the CPU physical address bits may very large.
This patch will use dynamic page allocation for pagetable mapping. We also need
reserve a big enough page pool at first. For HV MMU, we don't use 4K granularity
page table mapping, we need reserve PML4, PDPT and PD pages according the maximum
physical address space (PPT va and pa are identical mapping); For each VM EPT,
we reserve PML4, PDPT and PD pages according to the maximum physical address space
too, (the EPT address sapce can't beyond the physical address space), and we reserve
PT pages by real use cases of DRAM, low MMIO and high MMIO.
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Tracked-On: #5788
'ptcm' and 'ptct' are legacy name according
to the latest TCC spec, hence rename below files
to avoid confusing:
ptcm.c -> rtcm.c
ptcm.h -> rtcm.h
ptct.h -> rtct.h
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This way, we void exposing acrn_mbi as a global variable.
Tracked-On: #5661
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Create a multiboot module under the boot directory and move multiboot
files as part of this.
Tracked-On: #5661
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Remove vm_configs folder and move all the XML files and generic code example into config_tools/data
Tracked-On: #5644
Signed-off-by: Xie, nanlin <nanlin.xie@intel.com>
This patch makes the build system of the hypervisor to cache the board and
scenario XML files in the build directory and generate C configuration
files from them at build time. The C configuration files that are cached in
the git repo is no longer used or updated. Paths to these generated files
in the prebuild Makefile is updated accordingly.
The following targets are introduced or modified.
* defconfig: Copy default configuration XMLs to the build directory and
generate C configuration files.
* oldconfig: No action.
* menuconfig: Print a message to redirect users to use the config app
and exit.
* showconfig: Print the BOARD, SCENARIO and RELEASE configured for the
current build.
* update_config: No action.
* (default): Build the hypervisor with defined configurations.
The following variables can be set on the command line to specify the
default configuration to be used.
* BOARD: Either a name of the target board or a path to a customized
board XML. When a board name is specified, the board XML file
is expected to be available under
misc/acrn-config/xmls/board-xmls.
* SCENARIO: Either a name of the scenario of a path to a customized
scenario XML. When a scenario name is specified, the
scenario XML file is expected to be available under
misc/acrn-config/xmls/config-xmls/$(BOARD).
* BOARD_FILE: Path to the board XML file to be used. This is now
obsoleted as BOARD provides the same functionality.
* SCENARIO_FILE: Path to the scenario XML file to be used. This is now
obsoleted as BOARD provides the same functionality.
BOARD/SCENARIO or BOARD_FILE/SCENARIO_FILE shall be used in pair, and
BOARD_FILE/SCENARIO_FILE shall point to valid files when specified. Any
violation to those constraints will stop the build with error
messages. When BOARD/SCENARIO and BOARD_FILE/SCENARIO_FILE are both defined
on the command line, the former takes precedence as the latter are to be
obsoleted.
Additionally, users can define the RELEASE variable to specify a debug or
release build. In case a previous build exists but is configured for a
different build type, the build system will automatically update the
scenario XML and rebuild the sources.
This patch also includes the following tweaks:
1. Do not use `realpath` to process search paths for generated
headers. `realpath` only accepts paths of existing files, while the
directories for generated headers may not be created at the time the
search paths are calculated.
2. Always expect `pci_dev.c` to be in place.
3. HV_CONFIG_* series now encodes absolute paths.
v3:
* Do not validate BOARD_FILE/SCENARIO_FILE if BOARD/SCENARIO are given.
v2:
* `defconfig` now also generates the C configuration files.
* BOARD/SCENARIO now accept either board/scenario names or XML file paths.
* Adapt to the new allocation.xml & unified.xml.
* Cleanup names of internal variables in config.mk for brevity.
Tracked-On: #5644
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch move the split-lock logic into dedicated file
to reduce LOC. This may make the logic more clear.
Tracked-On: #5605
Signed-off-by: Jie Deng <jie.deng@intel.com>
1.We added a function init_psram to initialize pSRAM as well as some definitions.
Both AP and BSP shall call init_psram to make sure pSRAM is initialized, which is
required by PTCM.
BSP:
To parse PTCT and find the entry of PTCM command function, then call PTCM ABI.
AP:
Wait until BSP has done the parsing work, then call the PTCM ABI.
Synchronization of AP and BSP is ensured, both inside and outside PTCM.
2. Added calls of init_psram in init_pcpu_post to initialize pSRAM in HV booting phase
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
- Since de-privilege boot is removed, we no longer need to save boot
context in boot time.
- cpu_primary_start_64 is not an entry for ACRN hypervisor any more,
and can be removed.
Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now ACRN supports direct boot mode, which could be SBL/ABL, or GRUB boot.
Thus the vboot wrapper layer can be removed and the direct boot functions
don't need to be wrapped in direct_boot.c:
- remove call to init_vboot(), and call e820_alloc_memory() directly at the
time when the trampoline buffer is actually needed.
- Similarly, call CPU_IRQ_ENABLE() instead of the wrapper init_vboot_irq().
- remove get_ap_trampoline_buf(), since the existing function
get_trampoline_start16_paddr() returns the exact same value.
- merge init_general_vm_boot_info() into init_vm_boot_info().
- remove vm_sw_loader pointer, and call direct_boot_sw_loader() directly.
- move get_rsdp_ptr() from vboot_wrapper.c to multiboot.c, and remove the
wrapper over two boot modes.
Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
Since now we support direct boot only, we don't have to use FIRMWARE variable
to differentiate between sbl/GRUB and UEFI boot.
After this change:
- "FIRMWARE=sbl/uefi" should be removed from make commands.
- the firmware name is removed from the installed ACRN image. For example,
acrn.apl-up2.sbl.sdc.32.out will be changed to acrn.apl-up2.sdc.32.out.
Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
Move struct pt_intx_config vm0_pt_intx[] defintion to pt_intx.c
so that vm_configurations.h/vm_configurations.c are consistent for different boards
Tracked-On: #5229
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
compile ACPI tables for pre-launched VMs to one binary when pre-build
hypervisor.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When HV pass through the P2SB MMIO device to pre-launched VM, vgpio
device model traps MMIO access to the GPIO registers within P2SB so
that it can expose virtual IOAPIC pins to the VM in accordance with
the programmed mappings between gsi and vgsi.
Tracked-On: #5246
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The ivshmem memory regions use the memory of the hypervisor and
they are continuous and page aligned.
this patch is used to initialize each memory region hpa.
v2: 1) if CONFIG_IVSHMEM_SHARED_MEMORY_ENABLED is not defined, the
entire code of ivshmem will not be compiled.
2) change ivshmem shared memory unit from byte to page to avoid
misconfiguration.
3) add ivshmem configuration and vm configuration references
v3: 1) change CONFIG_IVSHMEM_SHARED_MEMORY_ENABLED to CONFIG_IVSHMEM_ENABLED
2) remove the ivshmem configuration sample, offline tool provides default
ivshmem configuration.
3) refine code style.
v4: 1) make ivshmem_base 2M aligned.
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch will move the VM configuration check to pre-build stage,
a test program will do the check for pre-defined VM configuration
data before making hypervisor binary. If test failed, the make
process will be aborted. So once the hypervisor binary is built
successfully or start to run, it means the VM configuration has
been sanitized.
The patch did not add any new VM configuration check function,
it just port the original sanitize_vm_config() function from cpu.c
to static_checks.c with below change:
1. remove runtime rdt detection for clos check;
2. replace pr_err() from logmsg.h with printf() from stdio.h;
3. replace runtime call get_pcpu_nums() in ALL_CPUS_MASK macro
with static defined MAX_PCPU_NUM;
4. remove cpu_affinity check since pre-launched VM might share
pcpu with SOS VM;
The BOARD/SCENARIO parameter check and configuration folder check is
also moved to prebuild Makefile.
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously we have complicated check mechanism on platform_acpi_info.h which
is supposed to be generated by acrn-config tool, but given the reality that
all configurations should be generated by acrn-config before build acrn
hypervisor, this check is not needed anymore.
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Conghui