The CCS bit of PORTSC register should be set according to the mapped
native port connection status, use xdev->devices if equal NULL is not
enough due to devices only be clear in disable slot which can't reflect
the native connection state in some gaps.
Tracked-On: #3163
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are many quirks in Intel xHCI implementation and it is very hard
to debug under Microsoft Windows OS, hence use ACRN xHCI extented
capabilities as the default setting.
Tracked-On: #3163
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Provide a minor fix for following issue:
Emulated USB controller Vendor ID and Device ID are swapped.
Tracked-On: #3053
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Xu, Anthony <anthony.xu@intel.com>
virtio_gpio_ops variable type is static,so use "+=" will let
the value keep increasing when acrn-dm reset.
Tracked-On: #3118
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: fuyongjie <fuyongjie@neusoft.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
AcrnGT traps and intercepts the memory region defined by PCI bar in
service OS kernel driver. No need to register the bar associated region
in dm. By the way, some OS changes BAR start address and there is no
mechanism to reflect the gvt changes back to dm. It causes problem that
other devices may register new region which falls in GVT `old` region,
and leads to hypervisor crash.
v4: Add FIXME tag. It's a short term solution before migrated to OVMF
v3: rewording the comments
v2: removed unnecessary braces and use printf to log (Peter)
Tracked-On: #2976
Reviewed-by: He, Min <min.he@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Liu Xinyun <xinyun.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch adds support to trigger rescan of virtio-blk device by the
guest VM. This is an alternate to hot-plugging virtio-blk device.
This feature stems from the kata requirement, which hot-plugs container
rootfs after the VM is launched.
As part of virtio-blk rescan,
1. Update the backing file for the virtio-blk device with valid file.
Basically update the empty file (with dummy bctxt) that was passed
during VM launch.
2. Update virtio-blk device configurations for udpated backing file.
3. Update size associated with valid backing file in the config space.
4. Notify guest OS, of the new config change.
5. On this notification, guest will do the following.
(i). Update virtio-blk capacity.
(ii). Revalidate the disk.
(iii). Identify the newly plugged block device.
v5 -> v6:
- Removed use of dummy file and added a new parameter "nodisk"
to virtio-blk which indicates user wants to create a virtio-blk
device with dummy backend.
- Moved vm_monitor_rescan from pci core to virtio-blk as it currently
applies to only virtio-blk.
v4 -> v5:
- Reverted back logic, so that blkrescan is only supported when
VM is launched with empty backend file.
v3 -> v4:
- Close block context before allocating a new one
- Allow backend filepath with additional options to be more generic
- Remove blank lines introduced as part of previous patches.
v2 -> v3:
- Renamed vdev ops vdev_blk rescan to vdev_rescan
- Renamed montior ops virtio_blkrescan_ops to virtio_rescan_ops
- Consolidated virtio-blk configuration specific part into
a separate function
- Removed size requirement in acrnctl command.
v1 -> v2:
- Added more comments in the code.
- Renamed APIs from displug to blkrescan, inline with acrnctl cmd.
- Split the patch into two. This corresponds to changes in acrn-dm.
Tracked-On: #3051
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ACRN interepts vm_set/reset_ptdev_intx_info hypercalls to set
the SOS vdev properties to indicate it is assigned to UOS. Today,
upon vm_reset_ptdev_intx_info hypercall ACRN does not revert the SOS
vdev properties back to that of SOS, as vbdf and pbdf were not
part of the API. This would leave ACRN data structures in an incorrect
state
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When vm reset,the gpio line state is busy if we don't close the fd.
Tracked-On: #3028
Signed-off-by: fuyongjie <fuyongjie@vip.qq.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When UOS set failling irq type, gpio BE will only request GPIOEVENT_REQUEST_FAILLING_EDGE
event from native gpio driver which will cause the last_level value is always 0.
So last_level can't be used to check whether interrupt should be injected or not.
It is the same for rising irq type.
v2: refine commit message.
Tracked-On: #3010
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: fuyongjie <fuyongjie@neusoft.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When the "i915.enable_gvt=0" is added for SOS kernel boot args, ACRN-DM will
fail in course of gvt initialization and errno is returned directly.
As the errno defined in linux/errno.h is positive, it will continue
the unexpected initialization in ACRN-DM and then the segment fault is
triggered.
So negative errno is returned in order to terminate the initialization.
Tracked-On: #2584
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
will access null pointer if 'gvt' is null.
Tracked-On: #1479
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Change return type to bool when returning int is not necessary.
Tracked-On: #2902
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Per debugging requirement, map the watchdog reset to warm reset.
So the ramconsole could be used to capture the kernel log of UOS
before watchdog is hit.
Tracked-On: #2471
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Update PCIR_SUBDEV_0 and PCIR_REVID in PCI configuration space to adapt
windows virtio-input driver. Otherwise virtio-input driver on Windows
will not be loaded correctly.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Guest OS for example Windows will disable bars before shutdown. Bars
are unregistered when they are disabled. Trying to unregister a bar
which has been unregistered causes a assertion. In pci_emul_free_bars
only those enabled bars should be unregistered.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Sometimes guest OS writes PCIR_COMMAND register to disable the device,
then update the bar address followed by a write to PCIR_COMMAND register
to enable the device again. In this case unregister_bar/register_bar
should be called otherwise the IO/MMIO regions monitored by device model
will not be updated accordingly.
Tracked-On: #2962
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The old logic to process control transfer failure only include two cases:
1 Short packet
2 Stall.
This patch includes all possible failures reported by Libusb and does
related emulation for UOS
Tracked-On: #2918
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Should not set hci_address to zero during USB reset.
Tracked-On: #2922
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add SDC ACPI device in dsdt, and assign GPIO 0 to SDC for SD card
detection.
Currently, the SD card hotplug function needs to insert SD card when
system boot, otherwise, it does not work. Since it needs P2SB virtualization
to set SD card presence state, and P2SB does not support user space interfaces
so this is an known issue.
Tracked-On: #2512
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The current xHCI mediator doesn't well support disable endpoint command.
This patch is one workaround for disable endpoint command to avoid
xHCI mediator to continue handle already dropped data.
Tracked-On: #2927
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some projects based on ACRN don't want tap name to contain "acrn_"
prefix. This patch removes that prefix.
Tracked-On: #2509
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
GPIO set/get value can be operated by accessing PIO space and the PIO
register definition for GPIO is in gpio_dm.h, frontend driver or ACPI
control methods can operate GPIO based on it.
GPIO mediator also defines ACPI control methods to support GPIO
operations, GPIO consumers can invoke PIO_GPIO_SET_VALUE/PIO_GPIO_GET_VALUE
in their own DSDT to set/get one GPIO value via ACPI control method.
v2: 1) Fix code style.
2) Use virtio configuration space callbacks to implement GPIO PIO operations
that replace pci_gpio_read/pci_gpio_write with virtio_cfgread/virtio_cfgwrite.
3) Return 0xFFFFFFFF as invalid result of PIO reading instead 0.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. free memory during pci_xhci_dev_destroy.
2. add libusb_free_device_list to free the list of devices previously
discovered using libusb_get_device_list().
3. fix possible memory corruption.
Tracked-On: #2892
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Users of pthread_cond_wait() should take care of spurious wakeups and it
is usually used in conjunction with a predicate. Not doing so can result
in unintended behavior. For example:
virtio_net_tx_thread():
entry -> pthread_cond_wait() -> spurious wakeup ->
vq_clear_used_ring_flags() -> segfault (vq->used uninitialized)
tpm_crb_request_deliver():
entry -> pthread_cond_wait() -> spurious wakeup ->
swtpm_handle_request() called needlessly
virtio_rnd_get_entropy():
entry -> pthread_cond_wait() -> spurious wakeup ->
no avail ring processing ->
virtio_rnd_notify() skips pthread_cond_signal() due to
rnd->in_progress ->
vq_endchains() called needlessly ->
wait in pthread_cond_wait() indefinitely
Fix these uses of pthread_cond_wait() by using predicates.
The only use case without a clear predicate is the tx thread in
virtio-mei, because it works with two-dimensional linked lists.
v1 -> v2:
- fix bugs and comments
- reduce code redundancy
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
- explicitly initialize the connections list
- use a do-while loop for vmei_proc_tx() since the first call must
always succeed
- make sure active_clients is initialized before creating the tx thread
v1 -> v2:
- split the cleanup commit into two parts
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Remove the uses of LIST_FIRST() and LIST_NEXT() plus an extra pointer.
Also, call LIST_INIT() in vmei_me_client_destroy_host_clients() before
releasing the mutex.
v1 -> v2:
- split the cleanup commit into two parts
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use pthread_cond_broadcast() while holding the mutex to guarantee the
signaling of its condition variable.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
virtio-blk never sets used_all_avail when calling vq_endchains(), which
may become problematic if VIRTIO_F_NOTIFY_ON_EMPTY is enabled.
Provide vq_endchains() with that info to ensure the delivery of an
interrupt when the avail ring is drained in the case of
VIRTIO_F_NOTIFY_ON_EMPTY.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Make sure VQ_ALLOC is visible only after vq is completely initialized.
This ensures vq_ring_ready() is reliable when it returns true.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Guest OS (e.g. Linux) may rely on a gap in E820 map in the 32-bit memory
space to determine the MMIO space for its PCI devices. Leave this gap
when building E820 map to keep the guest's PCI subsystem working.
After commit 7752d5cfe3d11ca0bb9c673ec38bd78ba6578f8e, Linux kernel no
longer requires the MMCONFIG region to be reserved in the E820 map.
Nonetheless, keep it in the reserved region to be on the safe side.
Tracked-On: #2843
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
print each IRQ descriptor interrupts number and all of IRQ descriptors
interrupts when UOS requests or releases a GPIO IRQ.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Support reading GPIO value when the GPIO switches to IRQ mode.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
GPIO IRQ controller emulation is used to handle level trigger and
edge trigger interrupts. Use GPIO IRQ virtqueue to handle IRQ chip
operations and GPIO event virtqueue to indicate IRQ source to UOS.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
add the GPIO IRQ definitions, and implement the GPIO IRQ
initialization and deinitialization.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are two virtqueues for irq, one for handling the operations of
front-end irq controller and the other for triggering the interrupt.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add the PCI MMIO fallback handler to the 64-bit PCI host aperture, so
that the guest won't inadvertently crash acrn-dm due to unhandled MMIO.
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Physcial bdf is needed in hypervisor to find the right pci dev.
Tracked-On: #2788
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now it will call the below function to create the corresponding pci_device_iterator
in passthrough device initialization. But it is not released in time.
So it needs to be released to fix the memory leak issue.
Tracked-On: #2762
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Otherwise it causes the memory leak.
V1->V2: Fix the leak of pi->arg as gvt structure also needs to be released.
Tracked-On: #2762
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Fix potential memory leakage in some error case handling.
Tracked-On: #2704
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Without memory barrier, the change of used ring index could not
immediately detected by FE, this would bring some problems.
For virtio-blk FE driver, when it receives an interrupt, and confirms the
used ring index has changed, it will first set ring flags with
VRING_AVAIL_F_NO_INTERRUPT, then get buffer from virtqueue, after
process this request, it will mask VRING_AVAIL_F_NO_INTERRUPT, and get
used ring index again before return. If used ring changes, it will
process it. At the same time, BE will read this flags before each notify,
if VRING_AVAIL_F_NO_INTERRUPT was set, BE will not inject interrupt.
Without memory barrier, before FE mask VRING_AVAIL_F_NO_INTERRUPT, BE
has finished notify without interrupt, then FE mask
VRING_AVAIL_F_NO_INTERRUPT, and get used ring index but failed (index
has changed from BE side). FE will return from interrupt handler
function, and wait for next interrupt which was not injected by BE. Thus,
this will cause kernel hung.
Tracked-On: #2732
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Xiaoguang Wu