Previously we have complicated check mechanism on platform_acpi_info.h which
is supposed to be generated by acrn-config tool, but given the reality that
all configurations should be generated by acrn-config before build acrn
hypervisor, this check is not needed anymore.
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The SDC scenario configurations will not be validated so remove it from
build makefile;
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The make command is same as old configs layout:
under acrn-hypervisor folder:
make hypervisor BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]
under hypervisor folder:
make BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]
if BOARD/SCENARIO parameter is not specified, the default will be:
BOARD=nuc7i7dnb SCENARIO=industry
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. not need 'clean' when building ACRN-HV/DM each time
2. correct efi-stub wrong dependency
Tracked-On: #2412
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
SCENARIO XML file has included RELEASE or DEBUG info already, so if RELEASE
is not specified in make command, Makefile should not override RELEASE info
in SCENARIO XML. If RELEASE is specified in make command, then RELEASE info
in SCENARIO XML could be overridden by make command.
The patch also fixed a issue that get correct board defconfig when build
hypervisor from TARGET_DIR;
Tracked-On: #4688
Signed-off-by: Victor Sun <victor.sun@intel.com>
The SCENARIO xml file already includes all information of KCONFIG file,
use KCONFIG_FILE/SCENARIO_FILE parameter at same time would introduce
conflict so this case should be invalid.
Tracked-On: #4616
Signed-off-by: Victor Sun <victor.sun@intel.com>
CONFIG_MAX_KATA_VM_NUM is a scenario specific configuration, so it is better
to put the MACRO in scenario folder directly, to instead the Kconfig item in
Kconfig file which should work for all scenarios;
Tracked-On: #4616
Signed-off-by: Victor Sun <victor.sun@intel.com>
Basicly ACRN scenario is a configuration name for specific usage. By giving
scenario name ACRN will load corresponding VM configurations to build the
hypervisor. But customer might have their own scenario name, change the
scenario type from choice to string is friendly to them since Kconfig source
file change will not be needed.
With this change, CONFIG_$(SCENARIO) will not exist in kconfig file and will
be instead of CONFIG_SCENARIO, so the Makefile need to be changed accordingly;
Tracked-On: #4616
Signed-off-by: Victor Sun <victor.sun@intel.com>
Customer might have specific folder where stores their own configurations
for their customized scenario/board, so add TARGET_DIR parameter to support
option that build hyprvisor with specified configurations.
So valid usages are: (target = all | hypervisor)
1. make <target>
2. make <target> KCONFIG_FILE=xxx [TARGET_DIR=xxx]
3. make <target> BOARD=xxx SCENARIO=xxx [TARGET_DIR=xxx]
4. make <target> BOARD_FILE=xxx SCENARIO_FILE=xxx [TARGET_DIR=xxx]
5. make <target> KCONFIG_FILE=xxx BOARD_FILE=xxx SCENARIO_FILE=xxx [TARGET_DIR=xxx]
If TARGET_DIR parameter is not specified in make command, hypervisor will be
built with board configurations under hypervisor/arch/x86/configs/ and scenario
configurations under hypervisor/scenarios/. Moreover, the configurations would
be overwritten if BOARD/SCENARIO files are specified in make command.
If TARGET_DIR parameter is specified in make command, hypervisor will be built
with configuration under that folder if no BOARD/SCENARIO files are specified.
When BOARD/SCENARIO files are available in make command, the TARGET_DIR is used
to store configurations that BOARD/SCENARIO file provided, i.e. Configurations
in TARGET_DIR folder will be overwritten.
Tracked-On: #4517
Signed-off-by: Victor Sun <victor.sun@intel.com>
When user use make parameters to specify BOARD and SCENARIO, there might
be some conflict because parameter of KCONFIG_FILE/BOARD_FILE/SCENARIO_FILE
also includes BOARD/SCENARIO info. To simplify, we only alow below valid
usages:
1. make <target>
2. make <target> KCONFIG_FILE=xxx
3. make <target> BOARD=xxx SCENARIO=xxx
4. make <target> BOARD_FILE=xxx SCENARIO_FILE=xxx
5. make <target> KCONFIG_FILE=xxx BOARD_FILE=xxx SCENARIO_FILE=xxx
Especially for case 1 that no any parameters are specified:
a. If hypervisor/build/.config file which generated by "make menuconfig"
exist, the .config file will be loaded as KCONFIG_FILE:
i.e. equal: make <target> KCONFIG_FILE=hypervisor/build/.config
b. If hypervisor/build/.config file does not exist,
the default BOARD/SCENARIO will be loaded:
i.e. equal: make <target> BOARD=$(BOARD) SCENARIO=$(SCENARIO)
Tracked-On: #4517
Signed-off-by: Victor Sun <victor.sun@intel.com>
When user finish doing "make menuconfig", the .config file is saved in
acrn-config/hypervisor/build/ by default. So current Makefile will check
whether this customized .config file exists and then continue to do
following make process. But this might not true in the real user case,
user could put this customized .config file anywhere.
To resolve this problem, the patch add a KCONFIG_FILE parameter to handle
such case. When KCONFIG_FILE is specified, hypervisor could build hypervisor
with the specific configuration file.
Tracked-On: #4517
Signed-off-by: Victor Sun <victor.sun@intel.com>
Set default CONFIG_KATA_VM_NUM to 1 in SDC scenario so that user could
have a try on Kata container without rebuilding hypervisor.
Please be aware that vcpu affinity of VM1 in CPU partition mode
would be impacted by this patch.
Tracked-On: #4232
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The BOARD and SCENARIO parameter of make hypervisor might be overridden
by menuconfig file or BOARD/SCENARIO XML files in make process, also the
$(BOARD)_acpi_info.h would be involved in build if exist, but user might
not be aware of that because the message could be easily ignored from
flooding logs. So give the configuration summary at the end of hypervisor
build process would be helpful for end user.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
If "make menuconfig" chooses hybrid or logical_partition scenario,
currently the build fails with "SCENARIO <$(SCENARIO)> is not supported.".
- CONFIG_LOGICAL_PARTITION: "awk -F "_|=" '{print $$2}'" yields the second
field (LOGICAL) only. The new "cut -d '_' -f 2-" keeps all fields after
"CONFIG_".
- Add the missing HYBRID scenario.
Tracked-On: #4067
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
The $(BOARD)_acpi_info.h is generated by acrn-config tool, remove this
header in make clean would cause failure when user finish configuring
in webUI and start to make acrn-hypervisor by the command
"make hypervisor BOARD=xxx SCENARIO=yyy" because we mandatory do make
clean before making hypervisor.
The patch replace the file removal with a warning string to hint user
to check the file validity.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
The *.mk files under misc/acrn-config/library are all rules for hypervisor
makefiles only, so move these files to hypervisor/scripts/makefile/ folder.
The folder of acrn-config/library/ will be used to store python script lib only.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Terry Zou <terry.zou@intel.com>
If we don't enforce passing BOARD_FILE/SCENARIO_FILE param to
hypervisor/Makefile, the BOARD_FILE/SCENARIO_FILE value would
not be overridden to its realpath in hypervisor/Makefile when
make hypervisor.
Tracked-On: #4067
Signed-off-by: Victor Sun <victor.sun@intel.com>
We now have four methods to configure board and scenario when
build acrn (sorted with priority):
1. Change them with "make menuconfig" in hypervisor directory
2. Give baord_file/scenario_file as make command parameters
3. Give BOARD/SCENARIO as make command parameters
4. Use BOARD/SCENARIO default value defined in Makefile file
With this patch, we make sure we follow priority exactly.
Tracked-On: #4067
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
Currently make hypervisor will depend on a $(BOARD).config file to load
board defconfig which triggered by oldconfig process, this will block
make from XMLs for a new board because $(BOARD).config never exist.
This requires us to patch configuration for new board earlier than make
oldconfig.
Tracked-On: #4067
Signed-off-by: Victor Sun <victor.sun@intel.com>
Usually We use '==' or '=' to compare strings under sh environment,
but '==' is not supported by dash which is the default sh environment
on Ubuntu, this leads efi build failure with current makefile.
Change the '==' to '=' to support both bash and dash.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
In commit "d0489ef3b7efcd4feca0a5ee11b1fd4f9a88864a", try to
move the sbl-hypervisor target to function. But missed the
EFI_OBJDIR parameter for install/install-debug function.
Another problem is we use same EFI_OBJDIR for all uefi build.
We now put the EFI_OBJDIR to the build out to avoid this issue.
Tracked-On: #3779
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Binbin Wu <binbin.wu@intel.com>
Add new build target for hybrid mode with uefi on platform apl-up2.
Also break long dependency target line to short one.
Tracked-On: #3779
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
To remove several duplicated Makefile cmdline, introduce the
functions to build/install acrn.
If we need to add new build to sbl-hypervisor (which is used
by integration team), we only need to define a new target and
call acrn build/install functions with correct parameters. And
then make sbl-hypervisor depend on that new target.
Tracked-On: #3779
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Previously we generate config patch based on config xml in toplevel Makefile,
it brings two issues:
1. we could not generate xml configuration patch with hypervisor source only;
2. The github commit info of current code base which is defined in version.h
will be overwritten by the new generated config patch, then the lost commit
info would impact build identify and bug reproducing.
This patch fixed these two issues. Besides, the patch also modify the logic of
platform_acpi_info file existence judgement, which need to be depends on the
acrn-config patch.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
1. if SCENARIO=$(SCENARIO) is specified in make param, then override
the default CONFIG_$(SCENARIO) value in existed .config. This means
we don't need to modify the default SCENARIO config in Kconfig file
to build the hypervisor;
2. Some board name shortcuts like apl-nuc/kbl-nuc-i7 need to be converted
to official board name to make sure overrides working;
3. Previously make sbl-hypervisor did not load the defconfig so the
defconfig for boards are lost, this patch fix this issue;
4. remove SCENARIO param when make hypervisor, because SCENARIO could
be got from SCENARIO_NAME which parsed from .config;
Tracked-On: #3593
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
1. This patch enabled one path for compiling the souce code which
generated by acrn-config tools.
The usage below:
$ make hypervisor BOARD_FILE=$(board.xml) SCENARIO_FILE=$(scenario.xml)
if BOARD_FILE and SCENARIO_FILE are not specified, fallback to previous
compiling hypervisor usage:
$ make hypervisor BOARD=$(board) SCENARIO=$(scenario)
v1-v2:
1). update commit message
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
We are trying to add both industry and sdc images to CL build. To
maintain the build interface unchanged (no change from CL side), we
extend the build command to generate the different target images.
To identity different images, we use rule:
$(HV_FILE).$(BOARD).$(FIRMWARE).$(SCENARIO)
as target image file name.
Tracked-On: #3593
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
The top-level Makefile white-lists BOARDs require to generate UEFI
executable, but more UEFI BOARDs have been supported since then.
As a result, the build instructions in existing documents may not be
sufficient for those new BOARD targets, if the reader misses to supply
the FIRMWARE variable while building the hypervisor.
Instead of adding new UEFI BOARD types using the original long if-else
statements, I'd like to propose to white-list SBL BOARD types, and add
the new SBL BOARD types to the list while needed.
Tracked-On: #3541
Signed-off-by: Tonny Tzeng <tonny.tzeng@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Add to include acrn.32.out during cl rpm
generation as acrn.(board).32.out
This is required for Hybrid mode bringup in multios
Tracked-On:#3487
Signed-off-by: Nikhil Rane <nikhil.rane@intel.com>
This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build
Tracked-On: #3482
Signed-off-by: Terry Zou <terry.zou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
PLATFORM is no longer used and is replaced with BOARD.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add sos_vm.h as a template in configs folder and is linked to
configs/$(CONFIG_BOARD)/sos_vm.h.
If customer need a board specific sos_vm.h, make a copy in
configs/$(CONFIG_BOARD)/ and replace the symbol link.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The Kconfig file of UP2 board was named as up2.config, rename to apl-up2.config
to make it consistent with naming of apl-mrb/kbl-nuc ...
The name change is also applied in Makefile to make sure compile success.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The ASL_COMPILER macro is hard coded as /usr/sbin/iasl, it is
complained by some developers. This patch changes it to a
flexible way, by which the following make command lines are
supported:
make
make devicemodel
make ASL_COMPILER=/path/to/iasl
make ASL_COMPILER=/path/to/iasl devicemodel
Tracked-On: #2298
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Using 'make' directly means that the jobserver environment variables don't get
passed down, so sub-builds for example don't use -j.
This is documented as the wrong thing to do:
https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable
Use $(MAKE) instead, and compile times drastically improve:
acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s
Tracked-On: #2370
Signed-off-by: Ross Burton <ross.burton@intel.com>
Currently, we support SBL on two different boards.
So build and install them all in E2E build.
Tracked-On: #2344
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
This will be consistent with naming of apl-mrb/kbl-nuc ...
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
BOARD&FIRMWARE are wrong When 'make sbl-hypervisor-install' w/o parameters
due to default platform is uefi. So set them clearly.
Tracked-On: #1995
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
PLATFORM is deprecated, let's use it only for board detection
Tracked-On: #1995
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
1. use RELEASE to control ./tools install target.
Tracked-On: #2168
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Combination of BOARD and FIRMWARE is a more precious definition.
And we decide PLATFORM_XXX based on FIRMWARE, remove relative one in
board config.
We reserve PLATFORM for backward compatibility.
Tracked-On: #1995
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Yin Fengwei < fengwei.yin@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
misc now has a new home: https://github.com/intel/ioc-cbc-tools.
The "Execstop" patch will be synced to new git tree soon.
ioc-cbc-tools was just added to Clear Linux, and will be added to
software-defined-cockpit bundle after this patch merged.
Merging this patch may cause some IOC releated feature block until we
get a new Clear Linux release. This is the switch window ...
Signed-off-by: Alek Du <alek.du@intel.com>
there is no git repo, which download from github release,
however, acrn-dm -v will get tag info from this repo, in
such case, the tag info was null.
this patch will fix nul tag, which get it from CL mock build.
Tracked-On: #676
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch adds a new target to build the documentation
from the top-level directory. Here is how to use it (from
the top-level source directory):
$ make doc
Or
$ make O=build-test doc
To clean all documentation build artefacts, simply call
$ make clean
Or
$ make O=build-test clean
Calling 'make' with no arguments will *not* build the
documentation by default.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Victor Sun