Commit Graph

78 Commits

Author SHA1 Message Date
Geoffroy Van Cutsem 52d2b0954a Makefile: create top-level target for the ACRN life_mngr
The ACRN life_mngr is not built by default as it is a component
that will run in the User VM. Instead we create a 'life_mngr'
(and 'life_mngr-install') targets to build it individually from
the top-level folder.

Tracked-On: #5660
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2021-03-29 15:38:29 +08:00
Geoffroy Van Cutsem 5535f25637 Makefile: add pre-requisite before building the hypervisor
Add the 'hvdefconfig' as a pre-requisite before building the hypervisor.
This solves the problem when using multiple parallel threads (i.e.
"make -j2").

Tracked-On: #5874
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2021-03-29 13:27:57 +08:00
Geoffroy Van Cutsem afe07cc237 Makefile: automatically determine the location of 'iasl'
The 'iasl' binary (from the acpica) package can be installed in
different locations depending on the distribution. By default,
we look for it under '/usr/sbin/'. But it is also often found
under '/usr/bin'. This can be overwritten by setting the ASL_COMPILER
flag when compiling ACRN.

This patch goes one step further and automatically determine where
'iasl' is on the development system if the ASL_COMPILER variable
has not been set already.

Tracked-On: #5854
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2021-03-29 13:21:56 +08:00
Geoffroy Van Cutsem ddc017a691 Makefile: enhance misc/Makefile for more intuitive usage
Enhance the 'misc/Makefile' to improve readability by grouping the
tools based on whether these are `services` or `debug_tools`
(following the folders they're in) and also create separate build
folders instead of putting *both* services and debug_tools in the
build/misc/debug_tools folder (default value).

Tracked-On: #5793
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2021-03-11 10:50:28 +08:00
Junjie Mao 848d48786a Makefile: expose config-related targets to the top-level Makefile
This patch allows the invocation of configuration-related hypervisor
targets from the top-level Makefile. The configuration summary is now
reported by the hypervisor rather than inspecting the variables directly.

Tracked-On: #5772
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
2021-03-03 09:13:44 +08:00
Junjie Mao 22064f71c1 Makefile: do not define default BOARD/SCENARIO in top-level Makefile
The top-level Makefile should not define any default value as the
hypervisor may have its own configurations set by previous builds.

This patch also changes the hypervisor default RELEASE to `n`.

Tracked-On: #5772
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
2021-03-03 09:13:44 +08:00
Junjie Mao 0edaaa880f Makefile: prefer RELEASE=y|n over RELEASE=0|1
For clarity, we now prefer y|n over 0|1 as the values of boolean options on
make command lines. This patch applies this preference to the Makefile of
the device model and tools, while RELEASE=0|1 is still supported for
backward compatibility.

Tracked-On: #5772
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
2021-03-03 09:13:44 +08:00
Junjie Mao 646e572d69 Makefile: remove unnecessary exports
We already passes BOARD, SCENARIO and RELEASE to recursive `make`, which
makes it unnecessary to export those variables. This patch explicitly
passes TOOLS_OUT as well and removes the explicit export for clarity.

Tracked-On: #5772
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
2021-03-03 09:13:44 +08:00
Xie, nanlin 97c9b24030 acrn-config: Reorg config tool folder
Remove vm_configs folder and move all the XML files and generic code example into config_tools/data

Tracked-On: #5644
Signed-off-by: Xie, nanlin <nanlin.xie@intel.com>
2021-01-27 11:08:28 +08:00
Junjie Mao 329296f095 Makefile: remove rules related to Kconfig and TARGET_DIR
With Kconfig being removed from the configuration process and configuration
files generated in build directories, we no longer need KCONFIG_FILE or
TARGET_DIR in the top-level Makefile. This patch removes rules that infer
BOARD/SCENARIO from Kconfig files or specify where generated configuration
files are saved.

A warning is generated if a user defines TARGET_DIR while the build can
proceed normally. An error is raised if a user defines KCONFIG_FILE.

v2:
 * BOARD/SCENARIO now accept paths relative to where Makefile resides in

Tracked-On: #5644
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
2021-01-20 17:58:00 +08:00
Geoffroy Van Cutsem 7a4b811a63 hv: set SHELL in top-level Makefile
Explicitly set the SHELL variable in the top-level Makefile. This ensures that
'echo -e' as used in the Makefile behaves correctly on various systems. It does
require /bin/bash to be present but that is probably true on many systems.

Tracked-On: #5588
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2020-12-11 09:46:21 +08:00
Geoffroy Van Cutsem b87070f95a Revert "hv: fix formatting for cfg.log output"
This reverts commit e2590d88aa. It introdcues a
regression for systems that have '/bin/sh' pointing at '/bin/bash'.

Tracked-On: #5588
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2020-12-11 09:46:21 +08:00
Geoffroy Van Cutsem e2590d88aa hv: fix formatting for cfg.log output
Fix the formatting for the cfg.log (build/hypervisor/cfg.log) generation. The
'echo' command uses '-e' but that gets put as-is into the log file. Removing
the '-e' argument fixes it.

Tracked-On: #5561
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2020-12-02 13:45:39 +08:00
Zide Chen 61699263f3 Makefile: remove FIRMWARE variable from Makefile
Since now we support direct boot only, we don't have to use FIRMWARE variable
to differentiate between sbl/GRUB and UEFI boot.

After this change:
- "FIRMWARE=sbl/uefi" should be removed from make commands.
- the firmware name is removed from the installed ACRN image. For example,
  acrn.apl-up2.sbl.sdc.32.out will be changed to acrn.apl-up2.sdc.32.out.

Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
2020-10-21 15:09:26 +08:00
Zide Chen 472534e922 efi-stub: remove efi-stub
UEFI boot is no longer supported in ACRN.

Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
2020-10-21 15:09:26 +08:00
Victor Sun 3acafd140f HV: Make: simplify acpi info header file check
Previously we have complicated check mechanism on platform_acpi_info.h which
is supposed to be generated by acrn-config tool, but given the reality that
all configurations should be generated by acrn-config before build acrn
hypervisor, this check is not needed anymore.

Tracked-On: #5077

Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
2020-08-04 09:05:29 +08:00
Victor Sun 07ad37f436 HV: Make: remove sdc scenario build support
The SDC scenario configurations will not be validated so remove it from
build makefile;

Tracked-On: #5077

Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
2020-08-04 09:05:29 +08:00
Victor Sun a57a4fd7fb HV: Make: enable build for new configs layout
The make command is same as old configs layout:

under acrn-hypervisor folder:
	make hypervisor BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]

under hypervisor folder:
	make BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]

if BOARD/SCENARIO parameter is not specified, the default will be:
	BOARD=nuc7i7dnb SCENARIO=industry

Tracked-On: #5077

Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
2020-07-24 16:16:06 +08:00
Minggui Cao a335679ce9 Makefile: remove 'clean' when building HV/DM
1. not need 'clean' when building ACRN-HV/DM each time
2. correct efi-stub wrong dependency

Tracked-On: #2412
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2020-05-21 15:12:21 +08:00
Victor Sun 00a38e89c4 Makefile: do not override RELEASE when build with XML
SCENARIO XML file has included RELEASE or DEBUG info already, so if RELEASE
is not specified in make command, Makefile should not override RELEASE info
in SCENARIO XML. If RELEASE is specified in make command, then RELEASE info
in SCENARIO XML could be overridden by make command.

The patch also fixed a issue that get correct board defconfig when build
hypervisor from TARGET_DIR;

Tracked-On: #4688

Signed-off-by: Victor Sun <victor.sun@intel.com>
2020-04-22 16:45:43 +08:00
Victor Sun e57ad3fd2f Makefile: disable KCONFIG_FILE when build from xml
The SCENARIO xml file already includes all information of KCONFIG file,
use KCONFIG_FILE/SCENARIO_FILE parameter at same time would introduce
conflict so this case should be invalid.

Tracked-On: #4616

Signed-off-by: Victor Sun <victor.sun@intel.com>
2020-04-17 13:45:18 +08:00
Victor Sun 3fd5fc9b51 Kconfig: remove MAX_KATA_VM_NUM
CONFIG_MAX_KATA_VM_NUM is a scenario specific configuration, so it is better
to put the MACRO in scenario folder directly, to instead the Kconfig item in
Kconfig file which should work for all scenarios;

Tracked-On: #4616

Signed-off-by: Victor Sun <victor.sun@intel.com>
2020-04-17 13:45:18 +08:00
Victor Sun dba0591f72 Kconfig: change scenario variable type to string
Basicly ACRN scenario is a configuration name for specific usage. By giving
scenario name ACRN will load corresponding VM configurations to build the
hypervisor. But customer might have their own scenario name, change the
scenario type from choice to string is friendly to them since Kconfig source
file change will not be needed.

With this change, CONFIG_$(SCENARIO) will not exist in kconfig file and will
be instead of CONFIG_SCENARIO, so the Makefile need to be changed accordingly;

Tracked-On: #4616

Signed-off-by: Victor Sun <victor.sun@intel.com>
2020-04-17 13:45:18 +08:00
Victor Sun e5777adf5e Makefile: support make with external configurations
Customer might have specific folder where stores their own configurations
for their customized scenario/board, so add TARGET_DIR parameter to support
option that build hyprvisor with specified configurations.

So valid usages are: (target = all | hypervisor)
 1. make <target>
 2. make <target> KCONFIG_FILE=xxx [TARGET_DIR=xxx]
 3. make <target> BOARD=xxx SCENARIO=xxx [TARGET_DIR=xxx]
 4. make <target> BOARD_FILE=xxx SCENARIO_FILE=xxx [TARGET_DIR=xxx]
 5. make <target> KCONFIG_FILE=xxx BOARD_FILE=xxx SCENARIO_FILE=xxx [TARGET_DIR=xxx]

If TARGET_DIR parameter is not specified in make command, hypervisor will be
built with board configurations under hypervisor/arch/x86/configs/ and scenario
configurations under hypervisor/scenarios/. Moreover, the configurations would
be overwritten if BOARD/SCENARIO files are specified in make command.

If TARGET_DIR parameter is specified in make command, hypervisor will be built
with configuration under that folder if no BOARD/SCENARIO files are specified.
When BOARD/SCENARIO files are available in make command, the TARGET_DIR is used
to store configurations that BOARD/SCENARIO file provided, i.e. Configurations
in TARGET_DIR folder will be overwritten.

Tracked-On: #4517

Signed-off-by: Victor Sun <victor.sun@intel.com>
2020-04-03 15:15:05 +08:00
Victor Sun 471f7e5b28 Makefile: parameters check for board and scenario
When user use make parameters to specify BOARD and SCENARIO, there might
be some conflict because parameter of KCONFIG_FILE/BOARD_FILE/SCENARIO_FILE
also includes BOARD/SCENARIO info. To simplify, we only alow below valid
usages:

 1. make <target>
 2. make <target> KCONFIG_FILE=xxx
 3. make <target> BOARD=xxx SCENARIO=xxx
 4. make <target> BOARD_FILE=xxx SCENARIO_FILE=xxx
 5. make <target> KCONFIG_FILE=xxx BOARD_FILE=xxx SCENARIO_FILE=xxx

Especially for case 1 that no any parameters are specified:
    a. If hypervisor/build/.config file which generated by "make menuconfig"
       exist, the .config file will be loaded as KCONFIG_FILE:
       i.e. equal: make <target> KCONFIG_FILE=hypervisor/build/.config

    b. If hypervisor/build/.config file does not exist,
       the default BOARD/SCENARIO will be loaded:
       i.e. equal: make <target> BOARD=$(BOARD) SCENARIO=$(SCENARIO)

Tracked-On: #4517

Signed-off-by: Victor Sun <victor.sun@intel.com>
2020-04-03 15:15:05 +08:00
Victor Sun 2db5ae08d1 Makefile: make hypervisor from specified Kconfig
When user finish doing "make menuconfig", the .config file is saved in
acrn-config/hypervisor/build/ by default. So current Makefile will check
whether this customized .config file exists and then continue to do
following make process. But this might not true in the real user case,
user could put this customized .config file anywhere.

To resolve this problem, the patch add a KCONFIG_FILE parameter to handle
such case. When KCONFIG_FILE is specified, hypervisor could build hypervisor
with the specific configuration file.

Tracked-On: #4517

Signed-off-by: Victor Sun <victor.sun@intel.com>
2020-04-03 15:15:05 +08:00
Victor Sun 64bbd37fd7 HV: Kconfig: set default Kata num to 1 in SDC
Set default CONFIG_KATA_VM_NUM to 1 in SDC scenario so that user could
have a try on Kata container without rebuilding hypervisor.

Please be aware that vcpu affinity of VM1 in CPU partition mode
would be impacted by this patch.

Tracked-On: #4232

Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-12-16 09:36:44 +08:00
Yonghua Huang 422a051c30 Makefile: Build Release version by default
Update build option for 'acrn-hypervisor', build release
 version by default.

Tracked-On: #4222
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
2019-12-12 09:12:03 +08:00
Victor Sun a90f4a0a53 Makefile: print config summary at the end
The BOARD and SCENARIO parameter of make hypervisor might be overridden
by menuconfig file or BOARD/SCENARIO XML files in make process, also the
$(BOARD)_acpi_info.h would be involved in build if exist, but user might
not be aware of that because the message could be easily ignored from
flooding logs. So give the configuration summary at the end of hypervisor
build process would be helpful for end user.

Tracked-On: #3779

Signed-off-by: Victor Sun <victor.sun@intel.com>
2019-12-11 13:31:34 +08:00
Zide Chen 2680121097 Makefile: fix make failure for logical_partition or hybrid scenario
If "make menuconfig" chooses hybrid or logical_partition scenario,
currently the build fails with "SCENARIO <$(SCENARIO)> is not supported.".

- CONFIG_LOGICAL_PARTITION: "awk -F "_|=" '{print $$2}'" yields the second
  field (LOGICAL) only. The new "cut -d '_' -f 2-" keeps all fields after
  "CONFIG_".

- Add the missing HYBRID scenario.

Tracked-On: #4067
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
2019-12-09 11:26:56 +08:00
Victor Sun f657bae0a8 Makefile: do not rm board acpi info header
The $(BOARD)_acpi_info.h is generated by acrn-config tool, remove this
header in make clean would cause failure when user finish configuring
in webUI and start to make acrn-hypervisor by the command
"make hypervisor BOARD=xxx SCENARIO=yyy" because we mandatory do make
clean before making hypervisor.

The patch replace the file removal with a warning string to hint user
to check the file validity.

Tracked-On: #3779

Signed-off-by: Victor Sun <victor.sun@intel.com>
2019-11-21 16:15:23 +08:00
Victor Sun 0d52f933da Makefile: move .mk file to hv scripts folder
The *.mk files under misc/acrn-config/library are all rules for hypervisor
makefiles only, so move these files to hypervisor/scripts/makefile/ folder.

The folder of acrn-config/library/ will be used to store python script lib only.

Tracked-On: #3779

Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Terry Zou <terry.zou@intel.com>
2019-11-13 16:05:30 +08:00
Victor Sun 5dd1c5350c Makefile: pass BOARD/SCENARIO FILE to make hv
If we don't enforce passing BOARD_FILE/SCENARIO_FILE param to
hypervisor/Makefile, the BOARD_FILE/SCENARIO_FILE value would
not be overridden to its realpath in hypervisor/Makefile when
make hypervisor.

Tracked-On: #4067

Signed-off-by: Victor Sun <victor.sun@intel.com>
2019-11-12 14:02:34 +08:00
Victor Sun 9a3cc8f748 makefile: cover menuconfig way to configure board/scenario
We now have four methods to configure board and scenario when
build acrn (sorted with priority):
1. Change them with "make menuconfig" in hypervisor directory
2. Give baord_file/scenario_file as make command parameters
3. Give BOARD/SCENARIO as make command parameters
4. Use BOARD/SCENARIO default value defined in Makefile file

With this patch, we make sure we follow priority exactly.

Tracked-On: #4067

Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
2019-11-11 15:01:50 +08:00
Victor Sun ed8fb94778 Makefile: support make from XML for new board
Currently make hypervisor will depend on a $(BOARD).config file to load
board defconfig which triggered by oldconfig process, this will block
make from XMLs for a new board because $(BOARD).config never exist.
This requires us to patch configuration for new board earlier than make
oldconfig.

Tracked-On: #4067
Signed-off-by: Victor Sun <victor.sun@intel.com>
2019-11-11 15:01:50 +08:00
wenlingz c8fa8e15f8 Modify KBL-NUC/SDC for default build
Tracked-On: #3968
Signed-off-by: wenlingz <wenling.zhang@intel.com>
2019-11-01 09:06:45 +08:00
Victor Sun e7134585b6 makefile: add dash support to build efi
Usually We use '==' or '=' to compare strings under sh environment,
but '==' is not supported by dash which is the default sh environment
on Ubuntu, this leads efi build failure with current makefile.

Change the '==' to '=' to support both bash and dash.

Tracked-On: #3779

Signed-off-by: Victor Sun <victor.sun@intel.com>
2019-10-25 09:01:55 +08:00
Yin Fengwei fcbf9d7b2c makefile: fix efi stub install issue
In commit "d0489ef3b7efcd4feca0a5ee11b1fd4f9a88864a", try to
move the sbl-hypervisor target to function. But missed the
EFI_OBJDIR parameter for install/install-debug function.

Another problem is we use same EFI_OBJDIR for all uefi build.
We now put the EFI_OBJDIR to the build out to avoid this issue.

Tracked-On: #3779
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Binbin Wu <binbin.wu@intel.com>
2019-10-12 16:06:44 +08:00
Yin Fengwei 43410fd008 Makefile: Add new build target for apl-up2/uefi/hybrid
Add new build target for hybrid mode with uefi on platform apl-up2.
Also break long dependency target line to short one.

Tracked-On: #3779
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
2019-10-09 09:51:15 +08:00
Yin Fengwei d0489ef3b7 Makefile: Add acrn build/install functions
To remove several duplicated Makefile cmdline, introduce the
functions to build/install acrn.

If we need to add new build to sbl-hypervisor (which is used
by integration team), we only need to define a new target and
call acrn build/install functions with correct parameters. And
then make sbl-hypervisor depend on that new target.

Tracked-On: #3779
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
2019-10-09 09:51:15 +08:00
Victor Sun 3f3ec3865e Makefile: generate config patch in hypervisor/Makefile
Previously we generate config patch based on config xml in toplevel Makefile,
it brings two issues:

1. we could not generate xml configuration patch with hypervisor source only;

2. The github commit info of current code base which is defined in version.h
will be overwritten by the new generated config patch, then the lost commit
info would impact build identify and bug reproducing.

This patch fixed these two issues. Besides, the patch also modify the logic of
platform_acpi_info file existence judgement, which need to be depends on the
acrn-config patch.

Tracked-On: #3602

Signed-off-by: Victor Sun <victor.sun@intel.com>
2019-09-20 19:39:22 +08:00
Victor Sun 0b65b8f05c Makefile: override .config with specified scenario
1. if SCENARIO=$(SCENARIO) is specified in make param, then override
the default CONFIG_$(SCENARIO) value in existed .config. This means
we don't need to modify the default SCENARIO config in Kconfig file
to build the hypervisor;

2. Some board name shortcuts like apl-nuc/kbl-nuc-i7 need to be converted
to official board name to make sure overrides working;

3. Previously make sbl-hypervisor did not load the defconfig so the
defconfig for boards are lost, this patch fix this issue;

4. remove SCENARIO param when make hypervisor, because SCENARIO could
be got from SCENARIO_NAME which parsed from .config;

Tracked-On: #3593

Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
2019-09-18 11:48:31 +08:00
Wei Liu 9389225633 makefile: enable xml config to build hypervisor
1. This patch enabled one path for compiling the souce code which
generated by acrn-config tools.

The usage below:
    $ make hypervisor BOARD_FILE=$(board.xml) SCENARIO_FILE=$(scenario.xml)

if BOARD_FILE and SCENARIO_FILE are not specified, fallback to previous
compiling hypervisor usage:
    $ make hypervisor BOARD=$(board) SCENARIO=$(scenario)

v1-v2:
    1). update commit message

Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-09-16 09:34:37 +08:00
Yin Fengwei adf3a59302 Makefile: Refine Makefile to generate both industry and sdc images
We are trying to add both industry and sdc images to CL build. To
maintain the build interface unchanged (no change from CL side), we
extend the build command to generate the different target images.

To identity different images, we use rule:
   $(HV_FILE).$(BOARD).$(FIRMWARE).$(SCENARIO)
as target image file name.

Tracked-On: #3593
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
2019-09-02 19:25:31 +08:00
Tonny Tzeng 0a067a833f make: white-list SBL firmware boards
The top-level Makefile white-lists BOARDs require to generate UEFI
executable, but more UEFI BOARDs have been supported since then.
As a result, the build instructions in existing documents may not be
sufficient for those new BOARD targets, if the reader misses to supply
the FIRMWARE variable while building the hypervisor.

Instead of adding new UEFI BOARD types using the original long if-else
statements, I'd like to propose to white-list SBL BOARD types, and add
the new SBL BOARD types to the list while needed.

Tracked-On: #3541
Signed-off-by: Tonny Tzeng <tonny.tzeng@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-08-12 11:24:55 +08:00
Nikhil Rane 4adc8102fd Makefile: Add install for uefi firmware
Add to include acrn.32.out during cl rpm
 generation as acrn.(board).32.out
This is required for Hybrid mode bringup in multios

Tracked-On:#3487
Signed-off-by: Nikhil Rane <nikhil.rane@intel.com>
2019-07-31 11:41:40 +08:00
Terry Zou a9c38a5cfb HV:Acrn-hypvervisor Root Directory Clean-up and create misc/ folder for Acrn daemons, services and tools.
This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build

Tracked-On: #3482
Signed-off-by: Terry Zou <terry.zou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-07-29 22:58:24 +08:00
Wei Liu 948d58fb9c acrn-dm: enable debug option for acrn-dm
enable acrn-dm debug option via RELEASE=0(by default)

Tracked-On: #2939
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
2019-04-16 15:24:25 +08:00
Tw 190b094075 Makefile: build for apl-nuc by default
apl-nuc will be the default board building for.

Tracked-On: #2780
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-03-15 14:10:20 +08:00
Tw 23e85ff12a Makefile: remove deprecated PLATFORM
PLATFORM is no longer used and is replaced with BOARD.

Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-03-13 10:26:55 +08:00