change it to match with release version.
Tracked-On: #1690
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Change kernel boot cmdline to load GuC firmware for SOS.
We want to enable GuC and HuC in Service OS and this is
an effort to enable use cases across all boards.
Tracked-On: #1638
Proposed-by: Charles, Daniel <daniel.charles@intel.com>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Enable pstore via the sos kernel cmdline, as ABL doesn't
reserve memory and pass parameters for pstore.
Tracked-On: #1024
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
The latest kernel has some issues when unloading dwc3_pci USB driver.
It will cause the kernel panic when unloading dwc3_pci driver in order to
assign USB controller to guest.
So the dwc3_pci won't be loaded.
Tracked-on: https://github.com/projectacrn/acrn-hypervisor/issues/1373
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Wu, Binbin <binbin.wu@intel.com>
sometimes, there would be CMA allocate failue when doing cycle rebooting android uos.
as there are different CMA clients, and android trusty need 16M contiguous memory,
32M CMA size may make this failure easy to come out.
This patch is to enlarge the CMA size to 64M, which mitigate the failure.
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
The guc boot option is refined on the new linux kernel. The boot option of
"i915.enable_guc=0" should be added in order to disable Guc instead of using
"enable_guc_loading/submission". But in order to use the same boot option on
multi kernel, both of them are kept.
V1->V2: Add the option on APL-NUC platform
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Binbin Wu<binbin.wu@intel.com>
after enable all cpus during sos bootup, there should not be maxcpus option
here
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This reverts commit 47116e8c4b.
if eDP panel connected, something wrong happens:
eDP HDMI1 HDMI2
---------------------------------------------------------
SOS UOS1 UOS1 Good.
SOS UOS1 BAD. SOS is OK. NO show in HDMI1
SOS UOS1 BAD. SOS is OK. NO show in HDMI2
SOS BAD.
This is also a temp solution: if only HDMI2 is connected, SOS will be
shown on HDMI2. But UOS1 is expected in some cases.
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Reviewed-by: Min He <min.he@intel.com>
it's needed for trusty memory reservation.
Tracked-on: ccm0001001-242199
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
HPET reading is much slower than TSC. Using it will hurt SOS performance
a lot, and then the whole system performance.
Remove the strict assignment from cmdline. Then SOS kernel will pickup
TSC as default clocksource.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
this patch add "reboot_panic=p,w" to command line of SOS to trigger
warm reboot on panic
Signed-off-by: zhouji3x <jianfengx.zhou@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When initial_modeset is enabled, will check EDID in early stage,
while sometime didn't get EDID in time through I2C, and will cause
CRTC not used correctly in some corner cases. Then we need force
enabling two HDMI connectors to attach CRTC in initial modeset stage.
Signed-off-by: Fei Jiang <fei.jiang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Reviewed-by: Min He <min.he@intel.com>
This reverts commit 5b1c536eee.
For normal case, we connected two HDMI monitors, one for SOS, another for UOS.
Previously UOS has problem when only see one display, it was the bug of
user space driver, then to work around this issue, submit temp patch to let
UOS see two displays.
From latest info, after switch to use github latest user spce driver in stable
branch, such problem was resolved. Then we need revert previous workaround
patch, otherwise, UOS will show on both HDMI1 and HDMI2.
Android HWC has problem when only see one display, then this is
workaround patch to make Android HDMI2 display normal.
V2: only change AaaG UOS kernel boot arg
Signed-off-by: Fei Jiang <fei.jiang@intel.com>
After i915.avail_planes_per_pipe(0x0000F) is added to SOS, it will cause
that the pipe B/C is initialized without plane. In such case this pipe
can't be used by UOS, with error: primary plane disabled.
The bootarg is changed so that the pipe B/C on SOS can be initialized with
at least one plane.
Signed-off-by: Jiang Fei <fei.jiang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Move the platform apl-mrb samples to devicemodel samples directory.
Add the install target to the missing samples files and re-organize the
samples directory structure to have nuc and apl-mrb samples.
Suggested-by: Arzhan Kinzhalin <arzhan.i.kinzhalin@intel.com>
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Minggui Cao