HPET is used to calibrate the tsc frequency if system fails to
get the accurate frequency from CPUID 0x15. But on some platforms
(for example: the emulated ACRN on QEMU) HPET is not started
by default, which causes the failure of calibration TSC by HPET.
Tracked-On: #8113
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The ACRN Configurator release 3.1 following the release 3.0 logic, so
the COM2 still used for S5.
This patch modify the "The release v3.0 ACRN Configurator assigns… …"
to "The release v3.0+ ACRN Configurator assigns… …" and refine a typo
issue.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
The BDF of user setting should skip the slot '00', '01', '02', '1f', all
these slots should select one of the 03~1e.
This patch add an assertion to check the above policy.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
1. In the title "Create a new Scenario", capitalize the "N" in "new".
2. Fix the file path to the installer.
Tracked-On: #8137
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
to avoid misleading for users, delete the description about
hypervisor relocation disabling, since it is not officially
supported by ACRN configurator now.
Tracked-On: #8133
Signed-off-by: hangliu1 <hang1.liu@linux.intel.com>
the configurator can clear its corresponding I/O port or BDF settings automatically when the VM of a vUART endpoint changes
v1-->v2: support the result working on multiple VUART Connections
Tracked-On: #8033
Signed-off-by: Chuang-Ke <chuangx.ke@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Now, if you use a memory address below 4G, there will be a warning,
but the build process of the hypervisor will not be interrupted.
Tracked-On: #6690
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
improve the translateError function by adding a condition: if there are errors describing the same error and same paths, remove the repeat one.
Tracked-On: #8117
Signed-off-by: Chuang-Ke <chuangx.ke@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
There is some issue when use upgrade to update some old xml version to
release_3.1, this patch modify the upgrade script to fix these issue.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Because of the iteration of i as is, the condition i <= XHCI_MAX_DEVS
always results as true and thus is unnecessary.
When compiling with cflag -Werror this condition will result in a
compilation failure.
Tracked-On: #8114
Signed-off-by: Marius Rodi <marius.rodi@linutronix.de>
The current code have not check whether all cache region has "Code and
Data Prioritization", it's an issue for some platform which have only
L2 or L3 "Code and Data Prioritization" capability.
This patch add assertion to check whether all L2, L3 cache could be set
CDP_ENABLE.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Restore a hidden option and its type accidentally removed by PR #8100 and #8099
Tracked-On: #8098
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Commit 2a8b80d0c ("config_tools: board_inspector: guess L3 CAT parameters
if not reported via CPUID") refactors the implementation of `--add-llc-cat`
option of the board inspector but does not update the referenced XML nodes
properly. This patch fixes a using-undefined-variable issue introduced by
that commit.
Tracked-On: #7948
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Generate config_summary.py script in misc/config-tools/scenario_config
directory. This script can extract important information from scenario
and board xml to summary it into RST format text.
Tracked-On: #8063
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
The configurator build requires the released documentation to be
published before it normally would so it can resolve :ref: links in
tooltips. Move these :ref: links into a second xs:documentation tag so
the reference will appear in the option documentation but not in the
tooltip (and break this premature dependency in the configurator build).
Tracked-On: #8098
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Currently we have to use additional patch to change config tool python
code to enable P2SB hidden device.
This patch have add an element, user could config the P2SB device in
the scenario XML.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
changed-docs.sh (and the accompanying awk script) shows docs changed
between a previous release branch and the current master branch, in a format that
can be used for the releae notes (a list of :ref: items).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Before, the logic automatically sets RDT as y if CDP is y. when the user imports a scenario, the CDP is y and RDT is y, the view will set CDP as y and RDT as y.
After fixing, the logic won't set RDT as y if CDP is y, which means the RDT won't be changed no matter if CDP is y or n(only when import scenario) .
Tracked-On: #8087
Signed-off-by: Chuang-Ke <chuangx.ke@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The current code sort cpu list by string order, this is an issue when
we want to assign more then 10 vCPUs for some VM.
So this patch rewrite the sort of these list, now the cpu list order
by int type.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Change ">>/dev/stderr" to ">&2"
Although it seems that the two have the same effects, the way they work is different.
The ">/dev/stderr" does an open(), it goes to the filesystem look for that file, opens and write to it. The second way, ">&2",just uses file descriptor 2.
The acrnd deamon outputs the stdin and stderr messages to journal through socket. And the socket cannot be manipulated with open methods.So acrnd cannot open the "/dev/stderr" which has redirected to a socket.
For successfully excuting the create_tap function in acrnd deamon, We change ">> /dev/stderr" to ">&2".
For the remain ">> /dev/stderr", they all follow the echo command and will not harm the launchscript functionality.
Tracked-On: #8066
Signed-off-by: Zhang Wei <wei6.zhang@intel.com>
The current elementpath of ACRN Configurator use 2.4.0 which can's
support some new python interface, this patch update it to 2.5.0 to
fix the above issue.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
The parameter for cpu_affinity is apicid of processor now.
Update the comment.
Tracked-On: #8050
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
If a platform has both P-core and E-core,
prompt user about the core type when set the CPU affinity for VMs.
Tracked-On: #8050
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The dynamic enum mechanism today only allows specifying the enum values
using XPATH. While this is sufficient from functionality point of view, it
may not provide the best experience as users have to understand the raw
data used internally. The typical way to present more informational labels
of enum values to users is enum names which cannot be supported by the
current XML schema to JSONSchema converter.
This patch allows the XML schema to specify dynamic enum names by adding an
`acrn:option-names` attribute to an element. The attribute is interpreted
as an XPATH which evaluates to a sequence of the same length of
`acrn-options`. The element at index i in that sequence is considered the
enum name of the enum value at index i of the results of `acrn:options`.
This mechanism is first applied to the `pcpu_id` element to indicate
whether a physical CPU is P-core or E-core.
Tracked-On: #8050
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
1.Use desktop profie to repalce the default profile.
2.Change the flask images path as a absolute path.
3.Add the ssh config function to enable the ssh.
Tracked-On: #7820
Signed-off-by: Liu Long <long.liu@linux.intel.com>
The current generic data moving policy in the upgrader do not work well
with complex nodes having multiple-occurred descendants. That causes the
lost of cache allocation policies in scenario XMLs when upgrading a v3.0
scenario XML to the coming v3.1.
This patch adds another generic-purpose mover that simply copies a whole
subtree unchanged.
Most nodes of this kind are handled by special movers as their formats
changed dramatically in v3.0, which is why that issue is not identified
earlier.
Tracked-On: #6690
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
The current code does not detect the memory applied by all VMs, if it
exceeds the native memory, there will be an allocate failed and these
VMs can't run.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
Reviewed-by: Junjie Mao junjie.mao@intel.com
fix CAT widget data doesn't refresh after import another scenario
the focus will go to "Basic Parameters" tab after import a scenario everytime. so that data could be refresh.
Tracked-On: #8068
Signed-off-by: Chuang-Ke <chuangx.ke@intel.com>
Added progress bar for board_inspector.py in all extractors and
some detailed step.
Added timeout mechanism for update-pciids command.
Tracked-On: #7973
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
Modified misc/config_tools/configurator/requirements.txt
and misc/config_tools/requirements.txt. Updated getting-started.rst
and acrn_configurator_tool.rst.
Tracked-On: #7975
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
1.add condition to recalculate maxVMID from saved VM name, so that vm name could be update correctly
if there is VM names "service VM" "real-time VM" "VM11", the new VM will be named "VM12"
2. support calculate VM name when changing any VM name.
if there is VM names "service VM" "real-time VM" , the new VM will be named "VM2",count from 0.
Tracked-On: #8046
Signed-off-by: Chuang-Ke <chuangx.ke@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
* Fix missing /build folder in copy command in GSG
* Mention USB stick needs formatting for large files when used for the
sample app (but we'll put that into GSG too).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Change virtio-i2c from legacy to modern device according to virtio spec v1.2.
Tracked-On: #8055
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Previously the sample apps needed to be run as root, but with a recent
update they could be run as a normal (acrn) user. Update the sample app
to use sudo for running these sample app components in case the user
doesn't login as root. Also, split running the background app and the
foreground app into two commands to eliminate some confusion.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Make the GSG more consistent with the sample app doc and show how to use
scp to transfer files between the dev and target machines.
Also add a mention of the sample app guide at the end of the GSG.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
fix: 1. popup window won't be close when user click background
2.close popup window do cancel function related
Tracked-On: #7991
Signed-off-by: Chuang-Ke <chuangx.ke@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Reyes, Amy