suspicious dereference of pointer 'fi->fi_devi'
by passing it to function 'pci_emul_free_bars()'
before NULL check.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This commit is reported to cause UOS reboot fail becasue the
pci_businfo[] only be allocated when calling pci_parse_slot
in dm initialization while UOS reboot will not allocate again.
So we can't free it here.
This reverts commit 7aaff68798.
Signed-off-by: Jie Deng <jie.deng@intel.com>
Current only 8 vioapic pins for pci irq (total 24 with 16 reserved),
which easily leads virtual GSI sharing with more and more passthrough
devices. This patch doulbes vioapic pin count and adds reboot hooks to
allocate from same pin after each reboot.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Remove 'license_header' files that were located in hypervisor/ and
devicemodel/ and used by the respective Makefiles to build the
'include/version.h' header file.
Both Makefiles were adjusted to use the top-level LICENSE file
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Entries of pci_businfo[] allocated in function "pci_parse_slot"
using calloc need to be freed when deinit.
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
The tools directory is moved out of ./devicemodle, to be in parallel with
hypervisor, devicemodel and doc.
Signed-off-by: Yan, Like <like.yan@intel.com>
The current dm, all non-pci and non-acpi related files are put into
hw/platform directory. This is actually disturbed the meaning of
*platform*. The platform devices are mean of board and SoC specific
non-PCI devices, like usb devices, etc.
This patch refines the ACRN dm directory architecture.
For some common device logic files, likes block_if.c/uart_core.c or
usb_core.c. They will move to hw/ directly.
For platform architecture depended files, create arch/ under root dir.
And create sub-dir arch/x86 for x86 architecture, will create more
architectures in future. The pm.c will move to this new dir.
The hw/acpi will be moved to hw/platform/acpi due to acpi also be
considered as part of platform.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
The name of acrn_register is too generic, rename to acpi_generic_address
which is more common.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
With curren code, DM will ignore the SIGHUP signal generated from
SOS reboot that causes DM will not release resource when SOS reboot
occurs.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Right now, the virtio_heci_proc_rx only process the first
available client at a time, then clear rx_need_sched flag to make
rx_thread sleep. It cause the remain data available clients lost the
current change to be processed. This patch resolves this issue, to
process all data available clients in a round prior to push rx_thread
enter sleep.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With rare probability, the two threads may try to get&put client
together. For client getting, the subsequent thread will get one
destroyed client. For client putting, it will cause acrn-dm get crashed
due to assert be triggered in virtio_heci_client_put.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The original code assume there is only one configuration for
virtio-blk, and 'b' is just located after that configuration,
so to get the value of 'b', it will end char *config by adding
'\0' after the first configuration.
Thus, char *config will change from:
/XXXX_vdisk_file,range=xxx/xxx
to:
/XXXX_vdisk_file
and char *b will point to:
range=xxx/xxx
So, the range will never take effect for virtio-blk.
Now, 'b' is designed to located just after emul, and
char *config will point to all configurations after 'b'.
Note: only ",b," is taken for boot device option.
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All related resources are freed in virtio_input_deinit.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The implementation of virtio_input_get_config is based on ioctl of
evdev fd. The following properties of input device are got by ioctl
to service configuation request from FE driver:
- name and devids
- propbit
- evbit: keybit/relbit/absbit/mscbit/swbit
- absbit
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Input events are read from host evdev fd and cached into a local queue.
When SYN_REPORT is read, the cached input events are sent to guest via
EVENT virtqueue. Guest input events are read from STATUS virtqueue then
written to host evdev fd.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the callbacks required by virtio_input_ops:
reset/cfgread/cfgwrite/apply_features/set_status.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The following are done in virtio_input_init:
- parse the command line to get the path of host evdev
- parse the command line to get the optional serial string
- calloc struct virtio_input and initialize it
- call virtio framework APIs to initialize virtio PCI
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the data structures and macros used to implement
virtio-input.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With this patch, UOS would be capable of guest Cx controling.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The function would write CST objects which needed to enable Cx control
to UOS DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
DM will use these functions to get cx entry cnt and cx data then inject
_CST objects to UOS DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Move all virtual devices init/deinit to function to simplify the
failure path of main loop. In the future, new virtual device will
not touch main loop.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- make ioc_init/ioc_deinit take struct vmctx as argument
- ioc_init return int instead of pointer to struct ioc_dev
- add ioc_dev in vmctx to track ioc_dev
- remove the atkbdc.h included in vmmapi.h
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Liu, Yuan1 <yuan1.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- Move the variable local_time from main.c to rtc.c
- Change vrtc_init to return int instead of pointer to vrtc. We do
track vrtc in struct vmctx.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Print an error message and exit rather than using assert, so it is
more obvious what the problem is and no core files are produced.
Fixes#61
Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Following functions have never been used anywhere.
Let's remove them.
fbsdrun_muxed()
fbsdrun_vmexit_on_hlt()
fbsdrun_vmexit_on_pause()
fbsdrun_disable_x2apic()
Remove weird prefix "fbsdrun" from following functions' name.
fbsdrun_virtio_msix() --> virtio_uses_msix()
fbsdrun_start_thread() --> start_thread()
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove weird prefix "fbsdrun" from the function name.
Since "fbsdrun_addcpu" has never been called by external
functions, Let's remove its declaration from "dm.h" and
make it as a static function to keep consistency with
"fbsdrun_deletecpu".
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The launch script can output log messages, that should be text.
But it is not always true. E.g. "launch_UOS.sh -U 2" echo message
contain '\0', The 'grep' command will show "Binary file (xxxxxx)
matches", thus acrnctl can't get the vmname. We can use 'grep -a'
instead.
Acked-by: Xu Anthony <anthony.xu@intel.com>
Reviewed-by: Yan Like <like.yan@intel.com>
Reported-by: Chen ChengX <chengx.chen@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
If guest doesn't initialize the net device, the tx thread will
block at the first tx_cond wait. When virtio_net_tx_stop is
invoked, the tx_thread will block on second tx_cond then.
Check whether we should exit tx_thread after first tx_cond
waiting
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add AmbientTemperature signal into the whitelist,
instead of TemperatureSensorEnvironment signal.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove some useless signals from the whitelist and add new three signals into
the whitelist based on requirement.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
adding API vm_map_memseg_vma() which using ioctl IC_SET_MEMSEG call
into VHM for futher mem(ept) mapping, based on user vma information.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Type '-T' in DM cmdline to enable hugetlb memory allocation.
It enabled 2 level of huge page:
Level 1: size 2M, path: /run/hugepage/acrn/huge_lv1/guid
Level 2: size 1G, path: /run/hugepage/acrn/huge_lv2/guid
NOTE:
before running, please make sure system already have enough hugepages
reserved under:
/sys/kernel/mm/hugepages/hugepages-xxxxkB/nr_hugepages
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
to avoid system resource/memory leaked when guest os reboot.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If multiple ports are defined in the command line, is_console is
not set to a correct value for non-console ports when the definition
of this non-console port is following the definition of a console port.
For example in below definition, the second port is configured as
console port which is not correct:
-s 5,virtio-console,@pty:pty_port,file:file_port=/home/root/test1
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Two memory ranges are allocated:
- PCI ECFG
- PCI hole
They should be released when deinit_pci. Old code mark
this two ranges not unregistered. Which is wrong for
warm reboot case. Make them could be unregistered.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When doing warm reboot, the mevent module will not be deinitialized.
We need to delete all mevent registered while deinit virutal device.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Also refine the failure path of lpc_init to make sure all
resources allocated get release.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add deinit function for uart.
Another work is add resource cleanup functions which is called
by other components when they are using uart.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Move the bvmcons enable flag from main.c to consport.c.
So we don't need the flag in main.c for bvmcons.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Fei Jiang