According to xHCI 5.4.8, the Port Link State Change (PLC) bit
should not be set to 1 during suspend process. This patch is used
to fix it.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Under current implementation, when USB control transfer failed
with Endpoint Stall error, there is no response reporting to UOS.
This logic will result of timeout in UOS kernel and hence a longer
enumeration process.
This patch reports the Stall Error to UOS by xHCI Completion Event,
which will fix this issue.
Tracked-On: #1895
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Device trap has great impact on latency of real time (RT) tasks.
This patch provide a virtio poll mode to avoid trap.
According to the virtio spec, backend devices can declare the
notification is not needed so that frontend will never trap.
This means the backends make commitment to the frontends they have a
poll mechanism which don’t need any frontends notification.
This patch uses a periodic timer to give backends pseudo notifications
so that drive them processing data in their virtqueues. People should
choose a appropriate notification peroid interval to use this poll
mode. Too big interval may cause virtqueue processing latency while
too small interval may cause high SOS CPU usage. The suggested interval
is between 100us to 1ms.
The poll mode is not enabled by default and traditional trap
notification mode will be used. To use poll mode for RT with interval
1ms. You can add following acrn-dm parameter.
--virtio_poll 1000000
Tracked-On: #1956
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
It is preferred to state the absence of a return value explicitly in the
doxygen-stile comments. Currently there are different styles of doing this,
including:
@return None
@return NULL
@return void
@return N/A
This patch unifies the above with `@return None`.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
v4 -> v5
Replace strcpy with strncpy
Refine resource free if error happens
Remove meaningless *in_progress* label for pthread wait/signal
Rename the coreu thread routine name (virtio_coreu_thread)
v3 -> v4
Move setsocketopt to connect_to_daemon
Cleanup coreu file descriptor after close
Reconnect CoreU daemon if the socket descriptor is invalid
v2 -> v3
Move the daemon connection to vdev_init
Diagram the CoreU virtualization architecture
Create a seperate thread for sending and receving the CoreU message
Change the socket name
v1 -> v2
No change
v1
Initial CoreU back-end driver
Signed-off-by: Yu Shiqiang <shiqiang.yu@intel.com>
Full virtualized TPM CRB device.
The TPM CRB module will handle TPM2 MMIO access. It will forward
the command/data to TPM emulator for command processing if there
is a valid TPM command.
Tracked-On: #1924
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Zhu Bing <bing.zhu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch will create control channel and command channel
so as to communicate with swtpm. Based on the 2 channels,
a set of APIs will be implemented and exposed.
Tracked-On: #1924
Signed-off-by: Deng Wei <wei.a.deng@intel.com>
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Signed-off-by: yingbinx <yingbinx.zeng@intel.com>
Reviewed-by: Zhu Bing <bing.zhu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The signal is used to get camera right and left values.
Tracked-On: #1886
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Simple atomic add/dec do no guarantee reference count full
synchronization without a lock. Compare and swap operations
are required for correct implementation.
Tracked-On: #1875
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Fix the prefix comparison, we need to compare on prefix length, not
on devpath len, otherwise we always fail.
Tracked-On: #1848
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
Reset directory name to receive clean prints.
Tracked-On: #1847
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
Edge triggered mevent on sysfs file is triggered
immediately after mevent_add(), hence this has to be ignored.
The issue that is resolved that the 'first' flag was
global and wasn't reset on each mevent_add().
Tracked-On: #1846
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
Prevent intercepting reset callback if reset state
transition is already in progress.
Tracked-On: #1846
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
At devicemodel/hw/uart_core.c, struct ttyfd has only one file
descriptor for uart backend device, that is OK if DM uart open
a tty characteor device under /dev/ for reading, writing and
terminal operating.
When use stdio as backend tty device, there are 2 fds, stdin/stdout.
DM should read from 'stdin' and output to 'stdout'. But ttyfd just
has one fd, and is only for 'stdin', so dm has to output to stdin,
too, not to stdout.
That cause a problem: if use stdio for uart backend, you can't
redirect UOS console to any other files. Because stdout is not used.
We hope to store information from VM console to system journal,
when UOS is launched by Acrnd automatically. The systemd need to
redirect stdout of dm to system journal files, but it can't be done.
So we can split the 'fd' of struct ttyfd to 'fd_in' & 'fd_out'.
they are same when use tty device; And they are different when use
stdio, 'fd_in' is for stdin and 'fd_out' is for stdout.
Tracked-On: #1759
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Like Yan <like.yan@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
IOC mediator should keep sending acnrd boot reason until received
UOS heartbeat init message, then turn to send SOS wakeup reason
through read native cbc lifecycle cdev.
Tracked-On: #1727
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
(EV_MSC, MSC_TIMESTAMP) is added to each frame just before the
SYN event since kernel 4.15. EV_MSC is configured as
INPUT_PASS_TO_ALL. In the use case of virtio-input, there is
a loop as follows:
- A mt frame with (EV_MSC, MSC_TIMESTAMP) is passed to FE.
- FE will call virtinput_status to pass (EV_MSC, MSC_TIMESTAMP)
back to BE.
- BE writes this event to evdev. Because (EV_MSC, MSC_TIMESTAMP)
is configured as INPUT_PASS_TO_ALL, it will be written into
the event buffer of evdev then be read out by BE without
SYN followed.
- Each mt frame will introduce one (EV_MSC, MSC_TIMESTAMP).
Later the frame becomes larger and larger...
This patch fixed above issue by ignoring MSC_TIMESTAMP from guest.
Besides that timestamp is added for every status event from guest
before writing to evdev.
Tracked-On: #1670
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The FW reset is currently detected from two points upon
a read failure from native read and from the reset
handler.
The fix removes the detection from the mevent rx callback,
leaving a single detection point.
To prevent reset hiccup, hw_ready is not set if a full rescan is
performed, it will be set only when virtio FW will request the FW reset.
Tracked-On: #1632
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
vmei_host_client_to_vmei() may return NULL we need to check
for the return value.
Tracked-On: #1630
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Simplify the flow by adding mutex_type variable
and call pthread_mutexattr_destroy() on the error path.
Tracked-On: #1630
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
MEI HBM the disconnect replay doesn't have the address set,
breaking the protocol, fix the issue.
Tracked-On: #1570
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Accoring to xHCI spec, there are some TRBs with zero data length
which used to pass command to xHCI. In the DM, those TRBs should
not be sent to native device through libusb. The logic in the
current implentation fails to process some corner cases, this
patch is used to fix it.
Tracked-On: #1639
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
- remove ASSERT & DEASSET IRQ line IOCTLs
- remove PULSE IRQ line IOCTLs, use set/clear
IRQ line instead.
- Use IC_SET_IRQLINE to set or clear IRQ line
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Virtio-console device specific configuration is readonly, callback
for the cfgwrite is not required. This patch removed the unused
virtio_console_cfgwrite.
Tracked-On: #1364
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Remove the changing operation for 'xdev->native_ports[].state' in
pci_xhci_cmd_disable_slot. The operation should not be done in this
funciton.
Tracked-On: #1589
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
On certain SOC, during the system suspend and resume process, connecting
and disconnecting events may happen. In previous implementation, DM didn't
clear PED bit in the xHCI PORTSC register, this will induce many invalid
polling operations in UOS and fail to enumerate one or more USB devices.
Tracked-On: #1589
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When the LINK type TRB are received, it should not be counted as
valid date block to give libusb. This patch is used to fix it.
Tracked-On: #1567
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The function for port unassigning: pci_xhci_clr_native_port_assigned
should reset the 'info' member to all zero when it is called.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This issue is result from reporting interrupt when the interrupt ability
of virtual xHCI is disabled.
As Event Ring State Machine showed in Figure 20 of xHCI spec, following
rules should be followed:
1 when RS bit of USBCMD register is zero, Event Ring should not be accessed;
2 when INTE bit of USBCMD register is zero, Interrupt should not be sent.
Tracked-On: #1566
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When usb device numbers reach up to XHCI_MAX_SLOTS. The slot_allocated
array will get out of range. This patch is used to fix this issue.
Tracked-On: #1479
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
After excap pointer is assigned, it should be checked whether it's
possible to get assignment for NULL pointer or not. This patch
fixes this issue.
Tracked-On: #1479
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
sscanf and strcpy are banned according to the security requirements.
So replace them with their safe alternative.
Tracked-on: #1496
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
physical RPMB is accessed if "phisycal_rpmb" is specified
in launch.sh.
Also it reserves some RPMB area with a fixed size(32KB) for
AttKB and future usage, which is RO for UOS.
Tracked-On: #1544
Signed-off-by: Huang, Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
In vmei_start() the HBM host client is created,
it handles HBM protocol.
The HBM client is a management object and
is not exposed by the mei native driver.
The communication between TX and RX threads
is handed via internal pipe(2).
Second, we connect all fixed address clients as the mei
protocol doesn't provide connection mechanism for them,
they appear always connected.
Last, the hw_ready is set.
Define virtio_mei_ops, ass all the handlers are now available.
Tracked-On: #1536
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Rx is triggered from epoll event (mevent), a host client
is retrieved from associated event data. P proper mei message header is
attached to the packet and sent to the virtio FE device.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
TX from virtio driver is handled firt via
virio tx notify handler vmei_notify_tx(),
placed into host clinet tx circular buffer.
TX thread will then write the data to the device.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Implement the FW part of the HBM protocol.
Currently the support version is 2.0.
The HBM protocol handles client management, such
initialization handshake, connection, power management,
and the flow control.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
ME client enumeration is received from sysfs attributes
of the native device.
V3: Use bounded functions.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
mei mediator perform reset handshake via
the cfgread/write handlers and provide access
to fw status registers.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
There are multiple types of resets that need to be handled
by the mei device.
The reset may be initiated from both sides host or fw.
The host requests reset on probe and remove,
power state transaction, and errors,
while ME FW may request reset upon error.
If the native device undergo reset the host application
has to be notified.
Tracked-On: #1536
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
1. virtio_mei structure represents an instance of mei device.
2. vmei_me_client represents an ME application in the MEI FW.
3. vmei_host_client represent a host application talking to the
ME application, ME application can support multiple connections.
4. Add debug helpers
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The virtio has two virtio queues, TX and RX.
TX have two segment buffers one for header and one for data.
The virtio_mei declares host buffer of size 128 slots, each
slot is a 4 bytes value.
For synchronization hw_ready and host_reset configuration flags
are used that emulates mei reset flow.
And last fw status registers must be also readable via virtio
mei device.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
mei handles objects on the list, hence reference counting
infrastructure is required for easier multithreading.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
libuuid sports only uuid (big endian encoding),
though mei requires guids (little endian encoding).
The base types are based on <linux/uuid.h> header.
Tracked-On: #1536
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Remove virtio_heci to be replaced with virtio_mei
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch is one workaround to resolve a crash issue for certain brand
touch screen (eGalaxTouch EXC7200-7368v1.01). The formal fix should
follow the xHCI spec to stop xfer and generate transfer completed event
trb prior to Stop Endpoint Command complete event trb. It should be a
big change and for short term, do nothing for the stop endpoint command
which is no other side effect be observed so far.
Tracked-On: #1413
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The function pci_xhci_get_native_port_index_by_path didn't
compare the bus number during the process of native USB
device searching. This patch is used to fix it.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is used to support emulation of multiple layers of hubs
under Flat Mode.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is used to enable multiple hubs in single layer under
Flat Mode.
Tracked-On: #1434
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To support the multiple hubs and multiple layers of hub, the
port_map_tbl should be replaced by native_ports to record all
native devices' state, including assignment state, emulation
state etc.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are many places in USB emulation implementation to get
native USB device infomation, and the related codes are long
and repeated many times. This patch introduces function
usb_get_native_devinfo to remove redundent codes for the
purpose mentioned above.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch introduce struct usb_devpath to indentify uniquely an USB
device, which is basic element for multiple hub support.
Tracked-On: #1434
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Previous design use bus and port(root hub port) for the identification
to the native USB device. It cannot work properly under the multi-hub
situation due to external USB hub is introduced.
This patch removes old hub implementation code, and subsequent patches
will be add support for mutiple hubs.
Tracked-On: #1434
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
As RPMB mux kernel module is going to be created,
there are two corresponding changes required for DM:
1. The name has been changed to /dev/rpmbmux.
2. DM does NOT check MAC of RPMB result returned by kernel
module because DM doesn't own the real key.
Tracked-On: #1508
Signed-off-by: Huang, Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
Per i6300esb spec, when WDT_INT_TYPE(bit 0 and 1 of WDT config register)
are set to 00, IRQ feature should be supported.
The WDT_INT_ACTIVE bit is set when the first stage of the 35-bit
down-counter reaches zero. An interrupt will be generated if WDT_INT_TYPE
is configured to do so (See WDT Configuration Register). This is a sticky
bit and is only cleared by writing a 1.
SMI feature(WDT_INT_TYPE are set to 0x10) is not supported.
Tracked-On: #1498
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch addes the debugexit function to DM. If it's enabled
by DM cmdline (by add --debugexit), the guest could write a
32bit value to port 0xF4 to trigger guest shutdown.
Tracked-on: #1465
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Current RTC emulation is based on sigevent mechanism, replace with
acrn_timer API which based on timerfd/epoll mechanism to avoid
potential resource accessing conflict in the async thread.
Tracked-On: #1489
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
In the current implementation sigev_notify is configured as
SIGEV_THREAD. When wdt expires an async thread is created and
the registered timer callback is called in the context of this
thread, then the watchdog interrupt emulation would require the
thread to assert intr on this pci dev.
There would be a race condition that when the wdt pci device is
freed in pci device deinit and then a timer expires. In this case
the wdt expired thread will access a freed buffer which would cause
problem such as heap corruption and segment fault.
In this patch we replace timer API with acrn_timer which is based
on timerfd/epoll mechanism to avoid the race condition.
Tracked-On: #1489
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch resolves acrn-dm crash issue when acrnd boots up the acrn-dm.
The rootcause is mevent_enable and mevent_disable have NULL pointer as
its parameter if uart backend is not tty capable, so add check code for
the uart backend before invoking mevent_enable and mevent_disable.
The issue can be reproduced when acrnd boots up the acrn-dm.
Tracked-On: #1466
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
VirtIO v1.0 spec 04 5.2.5:
- Protocol unit size is always 512 bytes.
- blk_size (logical block size) and physical_block_exp (physical block
size) do not affect the units in the protocol, only performance.
VirtIO v1.0 spec 04 5.2.6.1:
- A driver MUST NOT submit a request which would cause a read or write
beyond capacity.
Reject the requests that violate these terms.
v1 -> v2:
- add more comments for clarity
Tracked-On: #1422
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There is no GEOM framework in Linux. Remove dead code.
v1 -> v2:
- complete removal of the entire GEOM logic
Tracked-On: #1422
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
NHLT table contains the settings some audio drivers need.
An ACPI method is used to get NHLT table address & length.
In current DM code, the NHLT talbe length in the ACPI method
is hardcoded, which will cause troubles when the length of the
table changed.
This patch replaces the hardcoded NHLT table length according to
the table length read from SOS.
Tracked-On: #1461
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The write_dsdt_xhci function is use for describe the xdci dsdt table.
Correct its name.
Tracked-On: #1444
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
movb is used for registers STATUS and CFGGENERATION whose size is 1
byte. Previously hv cannot report the correct MMIO trap size for
movb and virtio hard coded their size to 4 as a workaround. hv fixed
movb instruction emulation and MMIO size can be reported correctly.
This patch removes those workaround.
commit 9df8790ffc ("hv: Fix two minor issues in instruction emulation code")
Tracked-On: #1449
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Add a function to do msix table deinit.
1. call api to reset msix entry in hypervisor
2. free virtual msix table memory
3. unmap pba page if any
4. unmap the pages passhtru to uos in MSIX BAR if any
Tracked-On: #1222
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Normally, for devices support MSI-X, PBA is passed-through to guest.
However, PBA and MSI-X table share the same bar, and part of PBA and
MSI-X table may share a same page for some devices.
If that is the case, the part of PBA within the page should be emulated
rather than passed-through.
This patch adds PBA emulation support for MSI-X.
Tracked-On: #1222
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This is an issue result from incomplete process logic of commit:
"ba68bd4 DM USB: xHCI: fix enumeration error after rebooting".
This patch is used to fix it.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1425
Replace strtok function with strsep function.
Tracked-On: #1401
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Return value check for snprintf function.
Tracked-On: #1401
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The patch resolves a bug that signal SteeringWheelSpeechCtrlBtn can not be
received in UOS. the rootcause is signal SteeringWheelSpeechCtrlBtn and
signal SteeringWheelPauseBtn are combined into one multi-signal message and
signal SteeringWheelPauseBtn is not defined.
To fix this, add SteeringWheelPauseBtn definition.
Tracked-On: #1410
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Use strnlen instead of strlen to avoid potential security issue.
Tracked-On: #1364
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vPIT is used as a source of system timer by UEFI (e.g. OVMF).
This is ported from Bhyve, with a few changes:
- move to user space, using POSIX timer
- support timer mode 3
- improve the emulation of OUT and STATUS byte
- improve the emulation of counter behavior
- improve the emulation of CE update in periodic mode
- treat CR == 0 as 0x10000
Origin: FreeBSD
License: BSD-3-Clause
URL: https://svnweb.freebsd.org/
commit: 283291
Purpose: Adding vPIT support.
Maintained-by: External
Tracked-On: #1392
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
According to PCI spec 3.0 section 6.2.2 "Device Control", guest
could write the command register to control device response to
io/mem access.
The origial code register/unregister the memory range which is
not suitable because it can't handle the sequence:
1. disble the device response to specific memory range
2. reboot guest (DM will try to free the memory range which
was freed in step 1 already)
Tracked-On: #1277
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Remove the workaround and will submit the fixing patch.
Tracked-On: #1277
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some firmware (e.g. UEFI) uses RTC CMOS to fetch the system's memory
configuration. Put lowmem / highmem info in the designated area.
This is a port of Bhyve vRTC's user-space logic.
v1 -> v2:
* move KB/MB/GB to macros.h
* move nvram offset definitions to rtc.h
Tracked-On: #1390
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When the physical USB device is disconnected before DM's emulation
is ready, the virtual connection state is not cleared properly. This
will cause the DM refuse to do emulation for future physical connection.
This patch clears those states mentioned above and hence fix the issue.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1367
When USB hub is disconnected, its connection status is not cleared
in the DM, this defect will cause the related assigned port could
not be used any more.
This patch is used fix this issue.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1365
Previous implementation binds libusb (in other words: usbfs) with
native device when DM receives the Enable Slot command. But according
to xHCI spec 4.6.5, the binding relationship is decided when the
Address Device command is received, so this implementation is not
consistent with hardware behaviors.
And this incompatible could induce following issue. When two or more
USB devices are connected at the same time, eg, connecting two devices
before Guest OS is booted, the virtual slot id may bind to wrong root
hub port.
This patch will do the binding when Address Device command is received
and related issues will be fixed.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1366
According to xHCI spec, the Stop Endpoint command should execute
no matter the endpoint is in halted state or not, but current
implementation just refuse do the command and return error to
Guest OS. It is wrong and this patch is used to fix it.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1366
One additional command parameter is added for virtio-net to support
vhost net. The command line for vhost net is as follows:
-s n,virtio-net,tap_xxx,vhost
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost proxy interacts with vhost kernel thru vhost char dev. Internal
interfaces are implemented based on ioctls of vhost char dev in this
patch.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are 2 eventfds for one virtqueue, one is for kick and the other
is for notify. eventfd used for kick is associated with a PIO/MMIO
region. eventfd used for notify is associated with a MSIx/INTx. The
eventfd pair is registered to VHM thru VHM char dev.
VHM irqfd currently only support MSIx. If INTx is used, vhost proxy
uses mevent to poll the call fd from vhost then inject interrupt to
guest.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost kernel driver needs the information of memory mapping between
GPA and the virtual addresses in device model process. This is
required for virtqueue related operations. This patch gets memory
mapping information from vmctx then conveys to vhost.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost_vq related interfaces are implemented in this patch. They are
vhost_vq_init/vhost_vq_deinit/vhost_vq_start/vhost_vq_stop.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch adds the vhost support to the device model virtio. A vhost
proxy is implemented based on the virtio framework and vhost char dev.
Key data structures and external interfaces are implemented in this
patch.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some virtio ring structures and virtio feature bits are using the
same name/definition as those in kernel header files(linux/
virtio_ring.h, linux/virtio_config.h). Kernel header files must
be included to perform ioctls to support vhost. There are
compiling errors due to duplicated definitions. In this patch
the following renamings are done:
VRING_DESC_F_NEXT -> ACRN_VRING_DESC_F_NEXT
VRING_DESC_F_WRITE -> ACRN_VRING_DESC_F_WRITE
VRING_DESC_F_INDIRECT -> ACRN_VRING_DESC_F_INDIRECT
VRING_AVAIL_F_NO_INTERRUPT -> ACRN_VRING_AVAIL_F_NO_INTERRUPT
VRING_USED_F_NO_NOTIFY -> ACRN_VRING_USED_F_NO_NOTIFY
VIRTIO_F_NOTIFY_ON_EMPTY -> ACRN_VIRTIO_F_NOTIFY_ON_EMPTY
VIRTIO_RING_F_INDIRECT_DESC -> ACRN_VIRTIO_RING_F_INDIRECT_DESC
VIRTIO_RING_F_EVENT_IDX -> ACRN_VIRTIO_RING_F_EVENT_IDX
VIRTIO_F_VERSION_1 -> ACRN_VIRTIO_F_VERSION_1
vring_avail -> virtio_vring_avail
vring_used -> virtio_vring_used
vring_size -> virtio_vring_size
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Netmap/vale attempts to speed up network communication by bypassing the
TCP/IP network stack, which requires patching the physical NIC driver so
that applications developed based on netmap can interact directly with
the physical NIC driver. It may make sense for some specific scenarios
which requres very high bandwith (10Gb/s or 100Gb/s), we can even put up
with the complexity and compatibility introduced by this techology.
However for ACRN, a virtualization solution for IoT, there is no need to
support this backend. For 1Gb NICs or below, the VBS-U/tap solution
can already achieve near-native bandwidth. To keep simplicity and
improve compatibility, remove the netmap/vale support in dm.
Tracked-On: #1313
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
CAVS audio driver depends on the NHLT table to get topology info.
Enable NHLT table in DM for audio passthrough.
Also increase the size reserved for NHLT in ACPI table from 2048B to 2560B.
Tracked-On: #1284
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This is temperory workaround for DM crash when doing fastboot
reboot. In fastboot, it will disable USB host functionality by
disable device respsone to one PCI bar. While DM code just release
the bar in this case. Which break the reboot functionality.
The workaround is to remove the assert to avoid DM abort. This is
safe because reboot will remove all memory range registered.
We will have offiical fixing later.
Tracked-On: #1277
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
USB device is connected before UOS is booted up, this scenario is
called 'cold plug' for easy to refer.
Under 'cold plug' situation, the libusb will not report 'connect'
event to device model, hence UOS will not discover 'cold plugged'
device.
This patch add support to fix this issue.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1242
Flat Mode for hub emulation means DM emulates USB devices under hub but
hide hub itself. Under this design the Guest OS cannot see any emulated
hub. So in the perspective of Guest OS, all the emulated devices are
under root hub.
This patch is used to enable feature as mentioned above. And please NOTE,
it is the initial version of hub flat Mode hub emulation, there are one
limitation: only one physical hub is supported. If second physical hub is
connected, the connect and disconnect behavior in second hub may affect
the function of first emulated hub.
The USB HUB device model should be the final long term solution, but it is
very complex. Use flat mode HUB emulation as the short term solution first
to support some USB touch devices which integrated internal HUB.
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1243
In current code, when read/write msix table, it first handle the case
the offset is in pba range when msix talbe and pba share the same bar.
But the code didn't add the condition whether pba bar equals msix table
bar. It will cause problems for the passthrugh devices,whose pba and msix
table don't share the same bar.
Tracked-On: #1209
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch implements RTC feature that UOS can set RTC wakeup timer
to IOC firmware with a specific time before enter S3/S5. IOC mediator
also needs to indicate RTC wakeup reason to UOS after exit S3/S5.
Tracked-On: #1213
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the current implementation sigev_notify is configured as
SIGEV_THREAD. When timer expires an async thread is created and
the registered timer callback is called in the context of this
thread. vrtc_update_timer will access the global data vrtc. There
is a race condition that vrtc is freed when deinit and then a timer
expires. In this case vrtc_update_timer will access a freed buffer
which causes problem such as heap corruption and segment fault.
In this patch signal model is used when timer is created. The signal
is masked and a signalfd is used to poll on it with mevent. This avoids
the race condition.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Tracked-On: #1185
if some pci devices behind gvt got failures when initlizing at init_pci(), gvt
instance have no chance to be destroied even acrn-dm exits.
NOTE: this patch can not work standalone, a following patch to kernel
side(643d40961cf: "vhm: init client->kthread_exit true") is requied as well,
otherwise it will stucks during destroying gvt instance.
Tracked-On: #1141
Signed-off-by: Li Zhijian <zhijianli88@163.com>
Unmap ptdev BAR when deinit to comply with native system, who zap out
all pre-allocated BARs.
Tracked-On: #1146
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. In default prescaler, the wdt clock is 1 KHz for a 20-bit counter,
which means approximate 1 second for 10 bits;
2. the default reset timer in seconds need to left shift 10 bits to
represent the value that set to i6300esb register;
Tracked-On: #1142
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To align with the configuration of the HOST tool, the SW masters
are organized in slices of 8 masters each.
The slice is also the minimal unit to allocate the SW masters for
each UOS.
The patch is to update the parameter checking function.
Tracked-On: #1138
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Reviewed-by: Chen Gang <gang.c.chen@intel.com>
This patch fixes an issue that CBC signal channel
is inactive after SOS resuming, it leads to IOC mediator
cannot transfer any signals between UOS and SOS. So IOC
mediator sends the open channel command to activate CBC
signal channel after resuming.
Tracked-On: #1115
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The whole vmctx will be cleared during cold reset.
cmos data should not be cleared during cold reset.
Move cmos data out of vmctx.
Tracked-On: #1118
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch is used to fix a potential issue resulted from typo.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
CMOS offset from 0x20 to 0x9F is used to store rpmb key information.
vsbl loader will init vrpmb key in CMOS when boot/reboot.
vsbl loader will not init vrpmb key during S3 resume.
vsbl will read vrpmb key via CMOS interface.
After reading, the key value is cleared in CMOS. So the key can only be
read once until next boot.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
When reset VBS-K status should be set to VIRTIO_DEV_INIT_SUCCESS
because at the time the char dev of VBS-K is still opened and
when set_status callback is called later, it depends on
VIRTIO_DEV_INIT_SUCCESS to resume.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
A new ioctl is introduced in VBS-K to issue reset command to kernel
VBS-K driver. This is used to support VBS-K S3. When FE enters S3
reset command is sent to device model. Backend driver in device model
should use this ioctl to inform the VBS-K drvier in kernel.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
RPMB frontend driver in UOS kernel has fixed unstable issue,
which requires BE for update as well. E.g. structure adjustment,
definition modification and so on.
Signed-off-by: Deng Wei <wei.a.deng@intel.com>
Signed-off-by: Huang Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
This patch enable the support for SOS S3 from the perspective
of USB xHCI.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The xHCI emulation greatly depends on the user space library libusb
which is based on the usbfs module in Linux kernel. The libusb will
bind usbfs to physical USB device which makes hardware control over
libusb in user space possible.
The pci_xhci_dev_create is called in pci_xhci_native_usb_dev_conn_cb
which is a callback function triggered by physical USB device plugging.
This function will bind the physical USB device to usbfs in SOS, which
we depend to create the communication between UOS xHCI driver with
physical USB device.
This design will fail if the reconnection happened in the SOS, which
will bind class driver to the physical USB device instead of usbfs,
hence the libusb device handle in DM is invalid.
Currently, the native S3 will disable the vbus for all xHCI ports and
re-drive during S3 resume. This behavior cause native USB driver unbind
the usbfs and bind to related class driver, then made the DM lost
control and failed to continue emulation.
To fix this issue, place the pci_xhci_dev_create in the function
pci_xhci_cmd_enable_slot. According to the xHCI spec 4.5.3 Figure 10,
the UOS always send Enable Slot command when a device is attached or
recovered from errors (by Disable Slot command). So every time the SOS
can't resuming normally or some unexpected disconnection happens, this
desigen will always survive by Disable Slot and Enable Slot command
series from UOS xHCI driver.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace 'native_assign_ports' with 'port_map_tbl' to be more accurate
for the role of this variable plays.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The variable native_assign_ports in struct pci_xhci_vdev is used
to record wether certain root hub port in SOS is assigned to UOS.
The logic uses zero to express 'not assigned' and nonzero to express
'assigned'. In this patch, use macro to replace number to express
better.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Currently the maximum number of bus and port for xHCI are
both set to 255, it is theoretically possible but in fact
not neccessary. This patch changes those two values to be
more proper: 4 buses and 20 ports.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Current design cannot get physical USB device information without
the creation of pci_xhci_dev_emu. This brings some difficulties in
certain situations, hence struct usb_native_devinfo is introduced
to describe neccessary information to solve this trouble.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
PORTSC (Port Status and Control Register) register play a very
important role in USB sub-system. This patch is used to refine
related manipulation functions.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Current DM design use two variables to do the indexing of xHCI
Event Ring: er_enq_idx and er_events_cnt. They are members of
the struct pci_xhci_rtsregs.
In UOS, during the process of xHCI resuming, the xHCI driver
will restore the ERSTBA (Event Ring Segment Table Base Address)
register to be the value before suspending. And at this point,
the old DM implementation will set both er_enq_idx and
er_events_cnt to be zero, so the DM will access the Event Ring
from the start position in the buffer. But at the same time the
UOS xHCI driver still wants to access the old position in the
Event Ring before suspending, which will result of unexpected
errors.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This device model is to configure the virtual IPU PCI device.
In order to execute this DM the lauch script needs to add
virtio-ipu as parameter to acrn-dm
For e.g. -s 21,virtio-ipu
Signed-off-by: Bandi,Kushal <kushal.bandi@intel.com>
Randomness sourced from /dev/random which does not block
once it has been seeded at bootup and you will always get
something when you read from that file. This is true on
Freebsd but unfortunately things are not the same on Linux.
Most cases, you can't read anything from /dev/random especially
on current acrn platform which lacking random events.
virtio_rnd inherted from freebsd doesn't work anymore.
This patch makes virtio_rnd working on Linux based SOS. It uses
blocking IO to sevice the front-end random driver and delays the
read operation into a new thread to avoid blocking the main
notify thread.
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. support "writeback" and "writethru" mode toggling for virtio-blk
conditionally. When starting DM with "writethru" parameter in
virtio-blk, guest OS could not toggle cache mode. When starting DM
with "writeback" parameter in virtio-blk, guest OS could toggle
cache mode.
------------------------------
DM cmdline | toggle support
------------+-----------------
writeback | yes
writethru | no
------------------------------
2. To toggle cache mode, run below command in guest OS:
echo "write back" > /sys/devices/xxx/vdx/cache_type
OR
echo "write through" > /sys/devices/xxx/vdx/cache_type
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
currently, each virtio device has their own virtio_ops implementation.
Take virtio-blk for example:
static struct virtio_ops virtio_blk_ops = {
"virtio_blk",
1,
sizeof(struct virtio_blk_config),
virtio_blk_reset,
virtio_blk_notify,
virtio_blk_cfgread,
virtio_blk_cfgwrite,
NULL,
NULL,
VIRTIO_BLK_S_HOSTCAPS,
};
If start DM with two virtio-blk, this global variable will be
assigined to two virtio-blk instances. Changing hv_caps for one
instance will affect others. But different instances may need
different capabilities.
To support this requirement, we suggest to move hv_caps to
virtio_base structure, and each instance can return their own
capabilities.
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In writethru mode, guest storage write are reported completed only
when the data has been written to physical storage.
In writeback mode, guest storage write are reported completed when
data is placed in SOS page cache. Needs to be flushed to the
physical storage.
USAGE:
-s x,virtio-blk,<filepath>,writeback
-s x,virtio-blk,<filepath>,writethru
The default mode is *writethru*
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
With latest FW, ethernet/wifi BDF changes from 3:0.0/4:0.0 to
2:0.0/3:0.0.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch resolves one arcn-dm crash issue when rebooting UOS.
The rootcause is that uart releases unopened backend tty.
One reproduced case is that the board does not support IOC but IOC
feature is enabled in the acrn-dm. After rebooting UOS, crash will
happen.
NOTE: This issue is not related to IOC, it also can be reproduced
with NON-IOC scenario. Just set one invalid PTY to the lpc, then
this issue should be reproduced.
We need re-visit the whole policy for such scenario in future.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
mevent is added only if uart backend fd refers TTY in uart_opentty.
So we should only delete mevent if uart backend fd refers TTY in uart_closetty.
This issue can be reproduced by below steps
1) acrnd starts UOS
2) run poweroff command in UOS
3) crash happens
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
We do:
- pause target vm
- suspend all virtual devices
- wait for resume notification
- resume all virtual devices
- reset target vm
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When guest enter/exit S3, we need to do
1. stop watchdog timer when guest enter S3 to avoid watchdog
timer reset guest when guest is in S3 state.
2. reset watchdog timer when guest exit from S3.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds new signals about parking brake and Hvac in the signal
definition and signal whitelist.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch resolves IOC mediator deinit function is blocked due to IOC mediator
core thread enters into sleep by epoll_wait, then pthread_join cannot return.
Trigger an event to wakeup core thread when IOC mediator deinit is invoked.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Enable isochronous transfer to support related USB devices
Change-Id: Id9fe0714e937fafc47de090ba6d349713cbe1b8b
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In the process of implementation for USB isochronous transfer, the
timeout (100ms) is not enough for Plantronics USB headset. So pass
longer timeout (300ms) to function libusb_control_transfer will
make USB headset of Plantronics work.
This change only results a longer execution time in ENUMERATION process
for few devices like Plantronics USB headset which need more time to do
its internal operations. For most USB devices, time less than 100ms are
enough to complete the execution of libusb_control_transfer. So basically
it will not affect the whole system performance.
In the long term, a better solution (eg: async control transfer) will be
introduced to replace current implementation.
Change-Id: I380e0cc337ec5741b1e4ce989abacce826b7dde4
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
BCD code is USB Specification Release Number in Binaray-Coded
Decimal. Add some BCD codes for some USB devices.
Change-Id: I40f04ef2ebaf5b0da554ff8f432415e8e3cebe01
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add microframe index register support, which is an important timing
component for isochronous transport.
Change-Id: I615664275b539cfb713d7795edd3f213b0302b92
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Handle the LIBUSB_TRANSFER_STALL error comes from libusb.
Change-Id: Id6911e9aaffafb256def5265a0ed9778b147d99a
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Current ring buffer processing logic assumes every transaction
will be submited to physical device before next transaction
coming. So it use two states 0 (free) and 1 (used) to represent
the state of every data block in the ring buffer. With the help
of the two state, the ring buffer could accept and process data
normally.
But this logic is not proper for ISOC transfer, which generally
submits many transactions even none of them arrive the physical
device. So this patch uses three values to represent the state
of data block in the ring buffer:
USB_XFER_BLK_FREE: this block could be filled with new data;
USB_XFER_BLK_HANDLING: this block is submited to physical device
but response from device is still not received;
USB_XFER_BLK_HANDLED: this block has been processed by physical
device.
The new logic will do different things for each state, which will
make the ISOC transfer work successfully.
Change-Id: I5559cae24c739633289742d64dd51751797b81a7
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The xHCI speed emulation is not right, which will cause failure
during enumeration of certain USB device. This patch is used to
fix it.
Change-Id: I2d996298983882ed6921a75a10dec9e8684a393e
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Refine the logic of usb interface state transition.
The libusb uses two pair of APIs to deal with usb interface:
1. libusb_claim_interface & libusb_detach_kernel_driver;
2. libusb_release_interface & libusb_attach_kernel_driver.
The calling sequences of those APIs are very important, so this
patch add some error handling code to make this process more
robust.
Change-Id: I0f7950aae806dee9a21f16cc293f51609eede0d8
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is used to add support for USB 3.0 devices. Currently
USB 3.0 disk is supported and tested successfully.
Change-Id: I3fbfbe9c28bc4b14af0417104f8fa822f9758908
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are many 'short packet' warnings in the UOS kernel dmesg output,
which are result from bad short packet identification algorithm. This
patch is used to fix it.
Change-Id: Idfa0b87fc96893b80d5c9fe8dab4db35aa5bfe84
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Original code will reset the whole USB device when xHCI Reset
Endpoint command is received, this behavior is not right. This
patch is used to fix it.
And according to xhci spec 4.6.8, if the endpoint is not in the
halted state, xHC should reject to execute this command and the
Context State Error should be returned. This patch also add this
logic.
Change-Id: I55a5918148d82d103fb3eb27d582f9676f9f61d3
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Mainly change the logs for transfer submission and completion,
which are very important parts in USB emulation code.
Change-Id: I4e04f1426e164ca3693e70946ed51380201e49ee
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch correct the USB request type which set wrong direction in
original code. It caused these important usb control transfer packets
send to phsical USB devices via libusb_control_transfer instead of
calling standard libusb APIs, likes libusb_set_configuration. From
libusb document, this is not the correct way:
"You should always use this function rather than formulating your own
SET_CONFIGURATION control request. This is because the underlying
operating system needs to know when such changes happen."
Change-Id: I7a6aade326220bee3b685086584920dacd37f87c
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This function add high level reset_vdev function. Which is
implemented to call deinit/init pairing to emulate the virtual
device reset operation.
This patch also add the system reset which keep the UOS RAM
content functionality to DM.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Guest has erquirement to support system/full reboot and S3. Which could
trigger different reset path in guest
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
We should keep variable name in function declaration. It makes
things clearer and easier to be understood.
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There has one new DRD driver followed usb role framework which is just
upstreamed to Linux community. This patch updates the xHCI DM to be
compatible with it. DM DRD code follows DRD spec to implement and make
it more reasonable.
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For dedicated xHCI extended capability, it need set corresponding PCI VID/PID.
This patch sets the Intel Apollo Lake platform PCI VID/PID for DRD
capability which will be checked for enabling DRD fucntion in new DRD
driver. Besides, this patch refines the PCI VID/PID related code.
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
6300esb has bit in its register to show whether the watchdog
timeout is hit.
This patch adds this bit support. So the guest could query
whether last reset is triggered by watchdog reset.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Cao Minggui <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Tested-by: Binbin Wu <binbin.wu@intel.com>
The lpc dm causes that UOS can't boot if the parameters are set incorrectly,
it is not friendly to users.
This patch optimizes the lpc error handle flow. UOS always can boot successfully
whatever the lpc settings are.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
When XSDT is created by DM, if audio passthru is enabled for
audio device (0:e:0), an entry is added in XSDT that references
the NHLT table. With this fix, NHLT appears in the kernel boot
log for ACPI and entry can be seen in /sys/firmware/acpi/tables/NHLT.
Signed-off-by: Madeeha Javed <madeeha_javed@mentor.com>
An immediate reset or power down will cause a loss of write content.
The cause is the data write to disk is at cache within a short
time window before it's synced to storage media.
An explicit fsync() forces to sync the data to storage to prevent
the data loss of such immediate reset.
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: duminx <minx.du@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
WIFI dev has no FLR, so 'reset' in sysfs calls secondary bus reset,
which cause PCI configuration mess(all FF) then passthrough failure.
To fix it, this patch makes no reset before passthrough by default,
until append this option.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Current option of removing vGSI capability is global, which exposes
vIOAPIC link for all ptdev even only one need this. This patch makes
it as ptdev local option to lower the system level impact. To keep
vGSI for MSI capable ptdev, just explicitly append ",keep_gsi" in
option list, like "-s 14,passthru,0/e/0,keep_gsi"
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Previously, either rnd->fd or vbs_k->fd isn't be closed in some cases.
this patch will close them in time.
V2: fix vbs_k->fd leak as well
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
- hardcode the devices' GSI info based on the platform
- reject the passthrough if the following requirement is not met
all the PCI devices that are sharing the same GSI should be assigned
to same VM to avoid physical GSI sharing between multiple VMs.
v4 -> v5
* Move the gsi_dev_mapping_tables definition in a separate file
* Add the GSI info that might be used by GPIO
* Update the HW name
v3 - > v4
* Refine the format of raw data to improve the readability
* Remove the redundant code when adding the new dev into the gsi
sharing group
v2 -> v3
* Add the MSI/MSI-x capability check
Do not add the device which supports MSI/MSI-x to the GSI sharing
group.
v1 -> v2
* Update the GSI raw data based on SBL
* Free the resources when gsi sharing violation occurs
* Move the MACRO PCI_BDF(b, d, f) to pci_core.h since passthrough.c
and gsi_sharing.c are both using it
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The device model is a userspace application on SOS to config the
PCI devices for the UOS. Audio mediator device model is to config
the virtual audio PCI device.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
When enabling GPU passthru for guest, stolen memory needs to be
disabled. This change disables stolen memory in passthru mode.
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Gong Zhipeng <zhipeng.gong@intel.com>
To enable GPU passthru, BAR2 allocation had problems when the allocation
is above the 4GB memory.This change is to accomodate the 256MB aperture
allocation in BAR2 to a more managable address.
v2: changed the MEMBASE64 address instead of increasing the mem_size.
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Gong Zhipeng <zhipeng.gong@intel.com>
This patch implements VM monitor operations including stop/suspend/resume.
For other VM monitor operations(pause/unpause/query), IOC mediator would not
register callbacks for them since there is no requirements from VM Manager.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
acrn-dm runs to segmentation fault when failed to create VMs with
improper parameters.
If vdevs failed to be created, they are still be freed in deinit(),
and dereference the null pointers leads to segfault.
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Some APIs of Openssl 1.0 are deprecated in Openssl 1.1+.
Two different API implementations are adaptable to both
Openssl 1.1- and 1.1+.
Fixes: #305
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Du Min <minx.du@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fix some potential crash issues, like wild
pointers access, buffer overflow and etc.
Change-Id: Iddd8e1820da426adc6b9b4d9da9e44017d9f365c
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With current implementation:
vm_init_vdevs only handles the negative error code, while passthru_init
returns positive error code when error occurs.
This causes unexpected dm crash since the real error is not being
handled properly.
What this patch does:
Change the error code to be negative value in passthru_init because it
is common in Linux kernel to return negative value when error occurs.
v2 -> v3
* add more comments about the reason to convert the return value
v1 -> v2:
* add a wrapper API to convert the error returned from pci_system_init
to the ERROR we defined in DM
* use the defined errno as the return value rather than -1
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The Intel Trace Hub (aka. North Peak, NPK) is a trace aggregator for
Software, Firmware, and Hardware. On the virtualization platform, it
can be used to output the traces from SOS/UOS/Hypervisor/FW together
with unified timestamps.
There are 2 software visible MMIO space in the npk pci device. One is
the CSR which maps the configuration registers, and the other is the
STMR which is organized as many Masters, and used to send the traces.
Each Master has a fixed number of Channels, which is 128 on GP. Each
channel occupies 64B, so the offset of each Master is 8K (64B*128).
Here is the detailed layout of STMR:
M=NPK_SW_MSTR_STP (1024 on GP)
+-------------------+
| m[M],c[C-1] |
Base(M,C-1) +-------------------+
| ... |
+-------------------+
| m[M],c[0] |
Base(M,0) +-------------------+
| ... |
+-------------------+
| m[i+1],c[1] |
Base(i+1,1) +-------------------+
| m[i+1],c[0] |
Base(i+1,0) +-------------------+
| ... |
+-------------------+
| m[i],c[1] |
Base(i,1)=SW_BAR+0x40 +-------------------+
| m[i],c[0] | 64B
Base(i,0)=SW_BAR +-------------------+
i=NPK_SW_MSTR_STRT (256 on GP)
CSR and STMR are treated differently in npk virtualization because:
1. CSR configuration should come from just one OS, instead of each OS.
In our case, it should come from SOS.
2. For performance and timing concern, the traces from each OS should
be written to STMR directly.
Based on these, the npk virtualization is implemented in this way:
1. The physical CSR is owned by SOS, and dm/npk emulates a software
one for the UOS, to keep the npk driver on UOS unchanged. Some CSR
initial values are configured to make the UOS npk driver think it
is working on a real npk. The CSR configuration from UOS is ignored
by dm, and it will not bring any side-effect. Because traces are the
only things needed from UOS, the location to send traces to and the
trace format are not affected by the CSR configuration.
2. Part of the physical STMR will be reserved for the SOS, and the
others will be passed through to the UOS, so that the UOS can write
the traces to the MMIO space directly.
A parameter is needed to indicate the offset and size of the Masters
to pass through to the UOS. For example, "-s 0:2,npk,512/256", there
are 256 Masters from #768 (256+512, #256 is the starting Master for
software tracing) passed through to the UOS.
CSR STMR
SOS: +--------------+ +----------------------------------+
| physical CSR | | Reserved for SOS | |
+--------------+ +----------------------------------+
UOS: +--------------+ +---------------+
| sw CSR by dm | | mapped to UOS |
+--------------+ +---------------+
Here is an overall flow about how it works.
1. System boots up, and the npk driver on SOS is loaded.
2. The dm is launched with parameters to enable npk virtualization.
3. The dm/npk sets up a bar for CSR, and some values are initialized
based on the parameters, for example, the total number of Masters for
the UOS.
4. The dm/npk sets up a bar for STMR, and maps part of the physical
STMR to it with an offset, according to the parameters.
5. The UOS boots up, and the native npk driver on the UOS is loaded.
6. Enable the traces from UOS, and the traces are written directly to
STMR, but not output by npk for now.
7. Enable the npk output on SOS, and now the traces are output by npk
to the selected target.
8. If the memory is the selected target, the traces can be retrieved
from memory on SOS, after stopping the traces.
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Reviewed-by: Zhang Di <di.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To avoid PTY device symbol link failure due to non-exist directory passed from
parameter. Add check_dir function to check the directory and create it if not
exist.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In virtio_heci struct there have deiniting/pending_reset/resetting
variables. All these variables represent the status of virtio heci devices.
Change them into one enum type variable for vheci status.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
NHLT table is used by some audio driver for topology data, but current
default audio driver doens't depend on it. Disable it by default due
to possible boot failure with different SOS firmware.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
To send open channel command after opening CBC signal channel successfully.
For the latest IOC firmware, the IOC mediator needs to send open channel command
to activate CBC signal channel. Otherwise, there will be no any signal data will
be received.
The open channel command is forward compatible that it would not impact for
older IOC firmware.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
This patch implements scalable xHCI parameter for extended capabilities.
For future supported platform, user can be easy to specify their
platform to emulate corresponding xHCI capabilities.
The new usage:
-s <n>,xhci,[bus1-port1,bus2-port2]:[tablet]:[log=x]:[cap=x]
The old usage:
-s <n>,xhci,[bus1-port1,bus2-port2]:[tablet]:[log=x]
Change-Id: Ie8ba056d57cac9446bcf3f39b342c7ac22245c61
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
This patch implements Intel ApolloLake xHCI extended capabilities. It
includes two dual role switch registers for switching shared
USB2&USB3 phys between xHCI and xDCI.
Change-Id: I2533537d8a4224da3cf9b2e7475aab9f65347a4a
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Some xHCI extended capabilities are writable. This patch adds the
writing function for excap.
Change-Id: Ie8b144b47ffa261f97d0461bf97b0c4d312a9333
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Every platform should have their own xHCI specific extended
capabilities, but the current xHCI DM is not scalable for them. This
patch refines related logic to make it scalable.
Current code only support 4 registers(4*32) as basic extended
capabilites. Base on this new implementation, the mmio range from
excapoff to regsend will cover real excap size according to the cap
parameter.
Change-Id: Ic55a4494e090ec255939cdb8f32950e3c8a66082
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
The VIRTIO_PCI_CAP_PCI_CFG capability creates an alternative access
method to the common configuration, notification, ISR and device-
specific configuration regions.
To access a device region, the driver writes into the capability
structure (ie. within the PCI configuration space) as follows:
- The driver sets the BAR to access by writing to cap.bar
- The driver sets the size of the access by writing 1, 2 or 4 to
cap.length
- The driver sets the offset within the BAR by writing to cap.offset
At that point, pci_cfg_data will provide a window of size cap.length
into the given cap.bar at offset cap.offset.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Virtio 1.0 introduced several PCIY_VENDOR capabilities. When trying to
write to these capabilities no action is taken so the registers in
the capability of VIRTIO_PCI_CAP_PCI_CFG such as bar, offset and length
remain the default value 0. Later a read or write of pci_cfg_data needs
these information to perform the indirect read or write to the bar
region.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
pci_emul_find_capability can be used to get the offset of a PCI
capability in PCI configuration space.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Move rpmb_sim.c and rpmb_backend.c to hw/platform/rpmb/
Signed-off-by: Huang Yang <yang.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
A simulated rpmbfile requires to enable 4MB access by writing
the last byte.
Otherwise, the read operation should be failed if no write
was operated on the address greater than the read address.
Writing the last byte during file creating ensures the whole
4MB address is readable.
Signed-off-by: Huang Yang <yang.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Fix by a fixed string length and correcting return value
Signed-off-by: Huang Yang <yang.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
With '--ptdev_no_reset', DM doen not abort but warn when assign PCIe
dev without reset capability.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Check reset method for PCIe dev according to 'reset' in sysfs, which
indicates reset capability, like FLR and secondary bus reset. PCIe dev
without reset capability is refused for passthrough to avoid failure
after UOS reboot.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Support log level options, which could change the related log level
without code change.
The new usage:
-s <n>,xhci,[bus1-port1,bus2-port2]:[tablet]:[log=x]
eg: -s 8,xhci,1-2,2-2:log=D
eg: -s 7,xhci,tablet
eg: -s 7,xhci,1-2,2-2:tablet
Note: please follow the board hardware design, assign the ports
according to the receptacle connection
Change-Id: I44639c7b076d21a40eb8f7b99cea8decc5c13c0c
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Re-write the xHCI option parse function to support port mapper.
The new usage:
-s <n>,xhci,[bus1-port1,bus2-port2]:[tablet]
eg: -s 8,xhci,1-2,2-2
eg: -s 7,xhci,tablet
eg: -s 7,xhci,1-2,2-2:tablet
Note: please follow the board hardware design, assign the ports
according to the receptacle connection
Change-Id: I3c8392f7e15580cf768c8c4a619d705411da699d
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add support for xHCI de-initialization when the guest
dose shutdown or reboot.
Change-Id: I3dfc1ed1a905b455ef455dff2065e872aa5c1ef8
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add support for xHCI port sharing feature, which enable the ability
to assign different native ports to different multi-UOSes. For
example:
1-2,1-2 assigned to UOS-1.
1-1,2-1 assigned to UOS-2.
Change-Id: I899070f7a8a6eb23179e41e7b1f1da24c52482b2
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
New USB APIs:
usb_native_is_bus_existed/usb_native_is_port_existed: Check if specific
usb bus or port are valid or not.
usb_native_is_ss_port: Check if the specific port is supper speed usb port.
Change-Id: I9ab54f6e81742321128d6abd5845ef966f0e9f37
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Implements the disconnect callback of libusb which will be called once
USB device plug out.
Change-Id: Ic5f072f08a92270e6e5836b49e5066da783af243
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Support USB mouse, USB keyboard and USB flash drive by enabling the
USB bulk and interrupt transfer for port mapper.
Change-Id: Ia202729e0cfb26fb44a6b278cf4306f2b0b6fa36
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the port change event related function, it
triggered when USB device be hot plugged in.
Change-Id: I065c1e93779f85f8ee6031960e129b59146e1bb7
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the control transfer for port mapper. With this
patch, USB2.0 device can be enumerated successfully in user OS.
Change-Id: I567bd00ca310d68375acd94a5cc5bcd287665df1
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a function to covert libusb error to the common USB core
error type.
Change-Id: Icb03fae2acdc914b3d32a5942faf7d79793a4bee
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move the UREQ macro from usb_mouse.c to usb.h
Change-Id: I977cf73291610b0448eb031a500788a397b55f88
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Allocate an emulated USB instance in connect callback function. This
instance is the entity of virtual USB device which will be enumerated
by the UOS.
Change-Id: I948d2ce9eca7e9d5bbab673f2505efc0a03c03b4
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For the purpose of USB port mapper, change struct usb_devemu to
common interface between HCD layer and USB device layer.
Besides, implements ue_init/ue_deinit/ue_info for port mapper.
Change-Id: Id4b7345c7b321b9bdab58139c61169d9229cb6f8
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Introduce the struct usb_dev which is used to abstract the physical USB
devices. And APIs for external call are also provided.
Change-Id: Ia25d52a6c670040da787f82b3bea34eee9f3d04d
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change the DPRINTF macro to UPRINTF for USB subsystem. The
UPRINTF will print log according to certain log level.
Change-Id: I5db8813357c9f684c25f23650e7c914f9063f842
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements INIT, ACTIVE, SUSPENDING and SUSPENDED operations of
IOC mediator lifecycle virtualization.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Implements state transfer framework to support IOC lifecycle virtualization.
Four states will be involved in this framework includes INIT, ACTIVE,SUSPENDING and
SUSPENDED.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Separate wakeup reason and hearbeat functions from lifecycle processing since
lifecycle virtualization only contains wakeup reason and heartbeat, the other
functions of lifecycle like boot selector, are not handled by IOC mediator.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Full logic to supprot vRPMB:
1. Automatic switch between physical or simulated RPMB.
But hardcode to use simulated one.
2. Parse RPMB cmd to basic APIs to:
2.1 check request frame HMAC with uos vkey
2.2 replace RPMB frame with real values.
3. RPMB partitioning for multiple UOS.
It's hardcoded for coming config file support.
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Du Min <minx.du@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
Create file as simulated RPMB storage for pre-production usage.
Add RPMB APIs to emulate behavior of physical RPMB controllor.
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Du Min <minx.du@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
This patch implements virtio rpmb backend VBS-U component,
it includes the basic module interface with DM. This
component will work with vRPMB FE driver together to
provide one communication channel between UOS and SOS.
Signed-off-by: weideng <wei.a.deng@intel.com>
Signed-off-by: yingbinx <yingbinx.zeng@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
suspicious dereference of pointer 'fi->fi_devi'
by passing it to function 'pci_emul_free_bars()'
before NULL check.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This commit is reported to cause UOS reboot fail becasue the
pci_businfo[] only be allocated when calling pci_parse_slot
in dm initialization while UOS reboot will not allocate again.
So we can't free it here.
This reverts commit 7aaff68798.
Signed-off-by: Jie Deng <jie.deng@intel.com>
Current only 8 vioapic pins for pci irq (total 24 with 16 reserved),
which easily leads virtual GSI sharing with more and more passthrough
devices. This patch doulbes vioapic pin count and adds reboot hooks to
allocate from same pin after each reboot.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Entries of pci_businfo[] allocated in function "pci_parse_slot"
using calloc need to be freed when deinit.
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
The current dm, all non-pci and non-acpi related files are put into
hw/platform directory. This is actually disturbed the meaning of
*platform*. The platform devices are mean of board and SoC specific
non-PCI devices, like usb devices, etc.
This patch refines the ACRN dm directory architecture.
For some common device logic files, likes block_if.c/uart_core.c or
usb_core.c. They will move to hw/ directly.
For platform architecture depended files, create arch/ under root dir.
And create sub-dir arch/x86 for x86 architecture, will create more
architectures in future. The pm.c will move to this new dir.
The hw/acpi will be moved to hw/platform/acpi due to acpi also be
considered as part of platform.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
The name of acrn_register is too generic, rename to acpi_generic_address
which is more common.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Right now, the virtio_heci_proc_rx only process the first
available client at a time, then clear rx_need_sched flag to make
rx_thread sleep. It cause the remain data available clients lost the
current change to be processed. This patch resolves this issue, to
process all data available clients in a round prior to push rx_thread
enter sleep.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With rare probability, the two threads may try to get&put client
together. For client getting, the subsequent thread will get one
destroyed client. For client putting, it will cause acrn-dm get crashed
due to assert be triggered in virtio_heci_client_put.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The original code assume there is only one configuration for
virtio-blk, and 'b' is just located after that configuration,
so to get the value of 'b', it will end char *config by adding
'\0' after the first configuration.
Thus, char *config will change from:
/XXXX_vdisk_file,range=xxx/xxx
to:
/XXXX_vdisk_file
and char *b will point to:
range=xxx/xxx
So, the range will never take effect for virtio-blk.
Now, 'b' is designed to located just after emul, and
char *config will point to all configurations after 'b'.
Note: only ",b," is taken for boot device option.
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All related resources are freed in virtio_input_deinit.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The implementation of virtio_input_get_config is based on ioctl of
evdev fd. The following properties of input device are got by ioctl
to service configuation request from FE driver:
- name and devids
- propbit
- evbit: keybit/relbit/absbit/mscbit/swbit
- absbit
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Input events are read from host evdev fd and cached into a local queue.
When SYN_REPORT is read, the cached input events are sent to guest via
EVENT virtqueue. Guest input events are read from STATUS virtqueue then
written to host evdev fd.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the callbacks required by virtio_input_ops:
reset/cfgread/cfgwrite/apply_features/set_status.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The following are done in virtio_input_init:
- parse the command line to get the path of host evdev
- parse the command line to get the optional serial string
- calloc struct virtio_input and initialize it
- call virtio framework APIs to initialize virtio PCI
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the data structures and macros used to implement
virtio-input.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With this patch, UOS would be capable of guest Cx controling.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The function would write CST objects which needed to enable Cx control
to UOS DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
DM will use these functions to get cx entry cnt and cx data then inject
_CST objects to UOS DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
- make ioc_init/ioc_deinit take struct vmctx as argument
- ioc_init return int instead of pointer to struct ioc_dev
- add ioc_dev in vmctx to track ioc_dev
- remove the atkbdc.h included in vmmapi.h
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Liu, Yuan1 <yuan1.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Xiaoguang Wu