This patch is to eliminate kernel error msgs:
'ACPI Error: AE_NOT_FOUND, Evaluating _PSS'
This is caused by missing of _PSS table in guest ACPI. It would
happen when pstate is not injected to the guest.
Kernel ACPI pstate driver first probes
_PPC(performance capabilites) and _PCT(performance control)
in ACPI. If they exist, then it loads the _PSS(performance state).
If _PPC/_PCT are presented while _PSS is missing, it prints
the error msg.
In acrn-dm, _PPC/_PCT are hard-coded to all vCPUs, while _PSS
are constructed with the pCPUs' pstate data. This is base on
assumption that all VMs can have pstate.
Now the pstate is given to VM only when the VM is not sharing
any CPU(and no RTVM is setup in the scenario).
When the VM doesn't have pstate, the hypercall will return px_cnt=0,
and the _PSS is not constructed. In this case, _PPC/PCT should not
be injected, too.
Tracked-On: #6848
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Since the UUID is not a *must* set parameter for the standard post-launched
VM which doesn't depend on any static VM configuration. We can remove
the KATA related code from hypervisor as it belongs to such VM type.
v2-->v3:
separate the struce acrn_platform_info change of devicemodel
v1-->v2:
update the subject and commit msg
Tracked-On:#6685
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
The UUID has several usages before:
1, For HV to identify the static VM configuration of post-launched VM.
2, Seed virtualization.
3, Slightly prevent launching malicous VM from SOS as lack of secure
boot.
The UUID is confused to user, user don't understand what it is. And user
don't know where to get/apply the UUID. The worst experience is user
can't launch any VMs w/o re-compile the hv. Everything needs to be
static decided in building phase.
Now we decide to remove UUID and split each usage. For 1st usage, use
vmname as the identifier of static VM configuration. For 2nd one, we
will use --vseed as the new parameter. For 3rd one, will pretect by
SOS's dm-verity.
This patch will remove the UUID parameter and support 1st&3rd usages
from DM part. For 2nd usage, another patch will be submitted later.
Tracked-On: #6685
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Fix the Vulnerable coding style in xhci and pci core
Tracked-On: #6769
Signed-off-by: Liu Long <longliu@intel.com>
Reviewed-by: Huang, Yonghua <yonghua.huang@intel.com>
Address of software SRAM configured by TCC tool shall be
page-aligned. This patch fixup these addresses if they're
not page aligned.
Tracked-On: #6778
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Fix a potential overflow problem in get_more_acpi_dev_info where ch_read
might have a value greater than 32.
Tracked-On: #6769
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Rename uos_rpmb_size to user_vm_rpmb_size.
rename get_uos_count to get_user_vm_count.
rename get_uos_id to get_user_vmid.
rename uos_id to user_vmid.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This patch enables TPM2 passthrough to post-launched VM with eventlog
support.
User starts by providing command line "--acpidev_pt <TPM2_HID>",
of which the <TPM2_HID> will be searched from /proc/iomem for TPM2 buffer
start address and size. Furthermore, If TPM2 eventlog is supported,
TPM2 eventlog information will be retrieved from sysfs TPM2 table and
passed-through as well.
v4 -> v5:
move tpm2 related logic from acpi.c to tpm.c
multiple API rename
Tracked-On: #6686
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch refines the ACPI device passthrough framework by defining a
generic framework. Note that when user gives an HID by "--acpidev_pt
<HID>", the pt logic will go through all registered ops to see if
there's a match.
v4 -> v5:
parse_pt_acpidev/parse_pt_mmiodev -> create_pt_acpidev/create_pt_mmiodev
(there were already "init_xxx" function present, so rename to
create_xxx)
"super user" -> "superuser"
multiple API renames
Tracked-On: #6686
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
'error' might be used uninitialized in cfginitbar. So initialize it to zero
at the beginning.
Tracked-On: #6284
Signed-off-by: Fei Li <fei1.li@intel.com>
Previously, when pass-thru IGD,
need to use the extra parameter "gpu",
it isn't friendly to user.
So remove the "gpu" paramater here.
Refine the logic for the judgment of IGD
check the following three conditions:
1. Physical BDF is 00:02.0
2. VGA class
3. vendor id is 0x8086
Then we can assume it's IGD.
Tracked-On: #6357
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For pass-thru PCI dev,
get the class id from the physical pci config space,
then set the value in virtual config space class id.
Tracked-On: #6357
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For pass-thru dev PIO bar,ensure it's identical mapping
(guest PIO bar start address equals to host PIO bar start address).
Then in HV side, set the corresponding VMCS io bitmap
to pass-thru these io ports for performance.
Tracked-On: #6508
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
1. refine the name of some functions and struct
2. add the support for PIO bar reservation
Tracked-On: #6508
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
When destroy the usb device release the resource allocate for transfer
in case cause the memory leak issue. Add the release and cancel
transfer request call back for the emulation device, use the emulation
device call back in xHCI controller emulation.
Tracked-On: #6533
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
detection of any error in 'probe_disk_log_file()'
calling 'pr_err()' will cause 'write_to_disk()' function
being called recursively infinitely, as pr_err will
call write_to_disk() and trap to probe_disk_log_file() again,
hence program will crash finally.
This patch fix above issue by using printf instead of pr_err,
as printf outputs to console directly.
Tracked-On: #6518
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Fix the bug introduced by 977da8f08. There had a typo that added
the "&" by mistake.
Tracked-On: #6476
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The event ring segment table pointer may be NULL when get the address
from guest, add pointer check before use it.
Tracked-On: #6476
Signed-off-by: Liu Long <long.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Function virtio_console_close_all will close all consoles, if the console->nports
value is 1, after the console be destroyed by the mevent teardown function, when
get the nports from the console, there will cause the NULL pointer. Fix the issue.
Tracked-On: #6431
Signed-off-by: Liu Long long.liu@intel.com
Reviewed-by: Jian Jun Chen jian.jun.chen@intel.com
Acked-by: Wang, Yu1 yu1.wang@intel.com
The address of OpRegion is not 4KB aligned,
if the OpRegion + extended VBT size is 16KB,
then it will take up to 5 physical pages in host.
So update the OpRegion size to 20KB
to expose the whole OpRegion to guest.
Tracked-On: #6270
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
"port->cb" in 'virtio_console_notify_tx()'
function maybe NULL when malicious inputs
are injected from virtio frondend in guest.
Tracked-On: #6388
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
1. add a name field to indicate what the MMIO Device is.
2. add two more MMIO resource to the acrn_mmiodev data structure.
Tracked-On: #6366
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
When a platform reboots or shuts down, the contents of RAM are not immediately
lost but begins to decay. During this period, there is a short timeframe during
which an attacker can turn the platform back on to boot into a program that
dumps the contents of memory (e.g., cold boot attacks). Encryption keys and
other secrets can be easily compromised through this method.
We already erasing the guest memory data when the guest is shut down normally.
However, if the guest is shut down abnormally, the contents of RAM may still
there. This patch mitigate this kind reset attack for a DM launched VM by
erasing the guest memory data by the guest has been created.
Tracked-On: #6061
Signed-off-by: Li Fei1 <fei1.li@intel.com>
User could use make targz-pkg command to generate tar package in
build directory,which could help user simplify the process
of installing acrn hypervisor in target board. user need to copy the
tarball package to target board,and extract it to "/" directory.
Tracked-On: #6355
Signed-off-by: liu hang1 <hang1.liu@intel.com>
Reviewed-by: VanCutsem, Geoffroy <geoffroy.vancutsem@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
vm_config size can be calced by platform_info.sw.max_vms *
platform_info.sw.vm_config_size.
Change vm_get_config() to call IOCTL ACRN_IOCTL_GET_PLATFORM_INFO
twice, first to get platform_info, second to get the vm_configs
content.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ADD_HV_VDEV -> ACRN_IOCTL_CREATE_VDEV
IC_REMOVE_HV_VDEV -> ACRN_IOCTL_DESTROY_VDEV
struct acrn_emul_dev -> struct acrn_vdev
Also, move struct acrn_vdev to acrn_common.h as this structure is used
by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_MMIODEV -> ACRN_IOCTL_ASSIGN_MMIODEV
IC_DEASSIGN_MMIODEV -> ACRN_IOCTL_DEASSIGN_MMIODEV
struct acrn_mmiodev has slight change. Move struct acrn_mmiodev into
acrn_common.h because it is used by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_PCIDEV -> ACRN_IOCTL_ASSIGN_PCIDEV
IC_DEASSIGN_PCIDEV -> ACRN_IOCTL_DEASSIGN_PCIDEV
QUIRK_PTDEV -> ACRN_PTDEV_QUIRK_ASSIGN
struct acrn_assign_pcidev -> struct acrn_pcidev
Move struct acrn_pcidev into acrn_common.h because it is used by both
DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Negative return value of vm_create_ioreq_client is invalid. 0 is valid.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
vmm.h has some unused definitions.
Keep the useful definitions and delete vmm.h
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The hypervisor creates vCPUs for a User VM in VM creation interface. The
vm_create_vcpu() interface is not needed anymore.
Remove vm_create_vcpu() from acrn-dm.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Interface version is not recommended in Linux kernel community. Please
check Documentation/driver-api/ioctl.rst for reasons.
Remove the unused API version check from acrn-dm.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The TPM driver will access some mmio registers using absolute address,
That means TPM base GPA must use same HPA value, when passthough it to VM
Tracked-On: #6126
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
CRB_REGS_CTRL_REQ is offset of control register to TPM mmio base,
need use the address to generate TPM2 acpi table
Tracked-On: #6126
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
With virtio polling mode enabled, a timer is running in the virtio
backend service. And the timer will also be triggered if its frondend
driver didn't do the device reset in shutdown. A freed virtio device
will be accessed in the polling timer handler.
Do the virtio reset() callback specifically to clear the polling timer
before the free.
Tracked-On: #6147
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Get and save native root port's max payload in dev cap register in
vrp_config data structure which will be used to configure vrp's max
payload by hv.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Zhou, Wu