Currently silentoldconfig uses the default values in Kconfig when .config does
not exist or is for a different platform from the one specified in command line
options. This makes it impossible to leverage defconfigs when a simple 'make' is
invoked to build the hypervisor, as 'make' calls oldconfig instead of defconfig
for creating a configuration file.
With DEFCONFIG_LIST in Kconfig, now silentoldconfig is also able to know which
defconfig is appropriate given the specified board. This patch changes the
behavior of oldsilentconfig as follows.
1. When an old .config for the given board exists, the script updates the
.config per configurations specified from the command line. Instead of
manually resetting all symbols, the script now relies on Kconfiglib's
internal logic to automatically update invisible symbols after symbol
value changes.
2. When an old .config does not exist or is not for the specified board, the
defconfig for that board is used as base line and further tweaked per
configurations from the command line.
v3 -> v4:
* Rephrase comments in silentoldconfig.py.
v2 -> v3:
* Keep backward compatibility of silentoldconfig.py since vmcfg also uses the
script.
v1 -> v2:
* Include .config when it is edited manually so that new configurations
overwritten the old (in the outdated config.mk).
* Compare the board in .config with the one in the defconfig instead of what is
specified in the environment variable BOARD, as defconfig and BOARD may use
different names (e.g. aliases or different cases)
Tracked-On: #1588
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
The current defconfigs are BIOS-specific which makes it difficult to maintain
multiple defconfigs for boards running the same BIOS.
This patch re-organizes the defconfigs to be board-specific. A command line
option BOARD is introduced to specify a board on which the current build targets
at. The original PLATFORM is kept for backward compatibility which redirects to
apl-mrb and nuc6cayh for sbl and uefi, respectively.
The getting started guide is also updated accordingly.
v1 -> v2:
* Rewrite 'up2' to 'UP2'.
Tracked-On: #1588
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
It is faster to check the existance of a certain library by trying importing
that library, instead of invoking pip3 for a complete list of installed
libraries. Time of the check can be significantly reduced.
# time pip3 list
...
real 0m6.038s
user 0m0.652s
sys 0m0.036s
# time python3 -c "import kconfiglib"
real 0m0.037s
user 0m0.036s
sys 0m0.000s
Tracked-On: #1588
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Add new format to parsed by kconfig to support
U and UL.
When config is 'int',if this symbol have 'range'
key words and bigger or qeual to 0,the int macro
will have suffix 'U'.
When config is 'hex',the suffix is 'U'.
When config have 'help' keywords,and the help contents
have the string "64-bit integer",it will add suffix 'L'.
V1->V2:
1.modified the comments to let it much eaisy to understand.
2.change the values' name protected_foot,protected_tai to
guard_begin and guard_end.
3.add regex to identified the '64-bit' and 'integer'.
V2->V3:
1.remove kconfiglib internal attribute
2.use config_string to avoid no active config entry
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
... following the naming convention of Linux kbuild.
v1 -> v2:
* Introduced.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
Since .config has PLATFORM now, it is expected that the PLATFORM= command line
option is no longer necessary as long as a proper .config exists.
This patch implements this expectation. Now the platform to be selected is
determined by the following steps.
1. If PLATFORM= is provided on the command line, the specified value is
used.
2. If there is no PLATFORM= on the command line and PLATFORM is defined in
config.mk, its value is used.
3. If neither PLATFORM= on the command line nor config.mk is available, a
predefined default value is used.
v1 -> v2:
* 'make oldconfig' should not pass CONFIG_xxx to the script since config.mk
can be out-dated.
* Change the default value of PLATFORM to SBL for backward compatibility of
'make all'.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
This patch enables 'make menuconfig' leveraging the menuconfig.py in kconfiglib,
which shows a TUI for modifying the current configurations.
Menuconfig.py is python3 only, and thus the existence of 'python3' instead of
'python' is checked and python3 is used to run all the scripts.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
The current implementation of the check_dep_* macros always append the
prerequisite checking target to BUILD_DEPS, but there are some cases when some
prerequisites are only necessary for some specific targets instead of general
builds.
This patch adds a second parameter to the check_dep_* macros specifying which
variable the generated target should be appended to.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
This patch introduces the following functions for Makefiles:
check_dep_exec <exe>
Check existence of the executable <exe>
check_dep_pylib <lib>
Check existence of the python library <lib>
Calling and evaluting the functions will create a check_xxx target and add the
target to the variable BUILD_DEPS. Thus it is sufficient to add the following
to a Makefile for checking a number of build dependencies.
include deps.mk
$(eval $(call check_dep_exec,python))
$(eval $(call check_dep_pylib,Sphinx))
all: $(BUILD_DEPS) ...
v4 -> v5:
* No changes.
v3 -> v4:
* No changes.
v2 -> v3:
* No changes.
v1 -> v2:
* New in v2.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
This patch introduces some scripts that takes a Kconfig script and generates
.config or config.h. These scripts are general and can be used by the
hypervisor, dm, tools, etc. as long as proper make targets are added.
Note: Kconfiglib by Ulf Magnusson is ISC licensed.
v4 -> v5:
* Add minimalconfig which creates a defconfig by minimizing a given .config.
v3 -> v4:
* silentoldconfig now properly generate a .config if an old one does not
exist.
v2 -> v3:
* Add license info and the permission notice of Kconfiglib.
* Mention the input Kconfig in the script descriptions.
v1 -> v2:
* Drop kconfiglib.py. The getting started guide will be updated accordingly
and dependency checks will be added to Makefile in the following patches.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Li, Fei1