The USB mediator doesn't support USB Attached SCSI (UAS) protocol
due to no proper implementation for USB Stream. This patch will
use USB Bulk transfer to workaround until formal implentation for
UAS is ready.
Tracked-On: #3486
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add native bus and port information in the control transfer logging code.
Tracked-On: #3486
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
- Add support for VRING_USED_F_NO_NOTIFY in virtio devices
- Revert "Initialize EmuVariable NV storage memory with varstore from
ROM"
- Add AcrnEmuVariableFvbRuntimeDxe to support NV storage
- Enable ahci driver.
Secure boot is supported from this release onwards.
Tracked-On: #3506
Signed-off-by: Peter Fang <peter.fang@intel.com>
The array index of "epid" may be out of bounds if
"epid >= XHCI_MAX_ENDPOINTS", so bound check is
necessary before it is used.
Tracked-On: #3434
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
When someone send DM message DM_STOP, with a non-zero data.acrnd_stop.force
value, DM set suspend mode to VM_SUSPEND_POWEROFF directly, that will
cause DM quit main loop. That can force stop VM
Tracked-On: #3484
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
when stdio is set as a virtio-console, guest run in backend, the open
file descriptor is not referring to a terminal.
Tracked-On: #3473
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Remove the possible NULL pointer access code for virtio-console.c
Add '\0' to end of native_patch[], to avoid the potential issue when
using %s to print the array for virtio-i2c.c
Tracked-On: #3467
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yonghua Huang <Yonghua.huang@intel.com>
Add feature that client uos can still connect to server uos after
rebooting.
Tracked-On: #3459
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To support modification of OVMF NV storage, add an option "w" for
--ovmf to write the changed OVMF NV data section back to the OVMF image
from guest memory before deinit operations. This will enable persistent
EFI variables. Only option "w" is supported, dm will exit if passing
invalid option. It expects OVMF NV storage writeback with option "w"
when power off or reboot the UOS, poweroff, cold and warm reboot in EFI
shell and when dm recieves SIGINT and SIGHUP.
Tracked-On: #3413
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Reviewed-by:Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
In order to support OVMF NV storage writeback, the High BIOS region in
the guest will behave as RAM and can be modified by OVMF itself. Give
the guest write permission to this page.
Tracked-On: #3413
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
In release environment, binary files must be stripped in
order to remove debugging code sections and symbol information
that aid attackers in the process of disassembly and reverse
engineering.
Use '-s' linking option to remove symbol table and relocation
information from release binaries.
Tracked-On: #3427
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
The old logic identify the short packet complete status (CS) by
comparing the transfered bytes (TB) and the expected transfered
bytes (ETB), it is right only when no error happend. If error
appears, the TB may be less than the ETB, but DM should report
error CS instead of short packet CS.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add resume state for the Port Link Status (PLS) bits.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When the Stop Endpoint command is trapped, should not clear all
the data structure. Instead, only reset the ring buffer.
The reason is the xHCI may continue queue TRB without doing whole
initializing process again.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Not change code logic, just modify some logging code.
Tracked-On: #3401
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
sprintf/vsnprintf are not safe, so use snprintf
instead of sprintf, use vasprintf instead of vsnprintf.
Tracked-On: #3394
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
va_end() was not getting called under certain condition
after the va_start() function call taking the va_list.
Tracked-On: #3396
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Set virtio-console BE to stdio for LaaG. Remove 'com1' but still keep
'console=ttyS0' in Laag kernel cmdline.
'console=ttyS0' means LaaG will use ttyS0 (0x3F8) as a console port, and
during bringup, it will access port ttyS0. When the same port is added
to hypervisor configuration file as a console port, the output will be
captured by hypervisor console, and can switch by "vm_console <vm_id>".
Tracked-On: #3370
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Current hugetlbfs code has a limitation on file path length.
The path string comprises of mount path + vm name.
Something like /run/hugepage/acrn/huge_lv1/vm1.
To this UUID (32 bytes) is added and the total path length
should be less than 128.
This works fine but in cases where the VM name is large as
in case kata, this check fails. Kata passes a sandbox-id
as VM name and so path + 32 for UUID easily exceed 128 bytes.
“/run/hugepage/acrn/huge_lv1/
sandbox-6d455fa48788eae82dee42410fc3d38849c2a5196f930b3d6944805aed8d24c7"
To address this, increase the size of MAX_PATH_LEN from
128 to 256 bytes.
Tracked-On: #3379
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add dsdt information for i2c adapter and i2c slave devices. Currently,
only support 'cam1', 'cam2' and 'hdac' for MRB board. To add other
specific i2c device, please extend acpi_node_table[].
Usage:
virtio-i2c,<bus>[:<slave_addr>[@<node>]][:<slave_addr>[@<node>]]
[,<bus>[:<slave_addr>[@<node>]][:<slave_addr>][@<node>]]
e.g.
virtio-i2c,0:70@cam1:2F
This will add slave devices 0x70, 0x74 to virtio i2c adapter.
And for 0x70, it has '@cam1', so, will also add acpi info for
it. For 0x74, it has no '@<node>', will not add any acpi info
for it.
Note, there is slave address in acpi node info, please use '@<node>'
according to real hardware.
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Create a new thread for virtio-i2c to process i2c msg from FE. After
receive the msg, BE will dispatch it to corresponding native adapter,
after the process done, it will kick the FE.
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Add backend interface for virtio-i2c, it will parse the parameters,
maintain the info for native i2c device, remap the slave address and
dispatch the requirement from FE. When there is only one native adapter,
will not remap the slave address.
Usage for virtio-i2c:
virtio-i2c,<bus>[:<slave_addr>][:<slave_addr>]
[,<bus>[:<slave_addr>][:<slave_addr>]]
e.g.
1. virtio-i2c,4:1C
SOS:
mount /dev/i2c-4, slave addr is 0x1C.
Guest OS:
/dev/i2c-x
|- 0x1C
2. virtio-i2c,4:1C:2F,6:70
SOS:
/dev/i2c-4, slave addr 0x1C and 0x2F
/dev/i2c-6, slave addr 0x70
Guest OS:
/dev/i2c-x
|- 0x1C
|- 0x2F
|- 0x70
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Add virtio i2c adapter BE driver.
Tracked-On: #3357
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
- check input by condition check, instead of assert.
- remove redundant header file including for some files.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
errx() does not require an additional exit().
Tracked-On: #3252
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yin, Fengwei <fengwei.yin@intel.com>
Remove the use of assert() in vHPET.
Tracked-On: #3252
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yin, Fengwei <fengwei.yin@intel.com>
Remove the use of assert() in vPIT.
Tracked-On: #3252
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yin, Fengwei <fengwei.yin@intel.com>
This reverts commit c42b41fe2b.
Kernel will stay in xapic mode with this boot arg, lapic won't be passthru, so revert.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
handle the error if failed to create GVT device.
- remove assert
- clean up the allocated resource
V2: refine code and clean up the allocated resource
Tracked-On: #3349
Signed-off-by: Liu Xinyun <xinyun.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
This commit adds "noapic" boot option to rt-linux, to skip IOAPIC probe.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Bug fix for parsing options, as the vritio-console support multiple
virtio serial ports, and the parameters is split by ',':
virtio-console,[@]stdio|tty|pty|file:portname[=portpath]\
[,[@]stdio|tty|pty|file:portname[=portpath]]
But the previous patch "refine console options parse code" not
cover this case, can only parse one port config. Fix it in this patch.
Tracked-On: #3337
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
SOS bootargs is specified in vm_configurations.h in different scenarios.
The files in devicemodel/samples/<board>/sos_bootargs_*.txt are not used anymore.
Remove these deprecated files to avoid confusion.
Tracked-On: #3214
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove assert in USB mediator code.
Tracked-On: #3252
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
The path modify the configuration for the runC container. There have
three changes for the configuration.
1、args [ "sh" ]: this is an example parameter and when the VM is started,
the parameter will be replaced by the launch_UOS script.
2、The linux capabilities will guarantee the Acrn-dm have enough capabilities
to run in container. For more infomation about the capalility you can refer
http://man7.org/linux/man-pages/man7/capabilities.7.htm
3、Move the rootfs to the parent directory, so all the container can share
the same rootfs.
Tracked-On: projectacrn#2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Remove unnecessary assert and add error handling when required.
Tracked-On: #3252
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Current launch script leaves stdio to OVMF console and, vxworks console to pty, so users
need to use additional tool like minicom to connect to pty device to use vxWorks.
To be more convinient, this commit changes the vxWorks to use the stdio by default, and OVMF
is not availabe by default.
Tracked-On: #3069
Signed-off-by: Yan, Like <like.yan@intel.com>
This patch is to clean up assert from virtio-gpio
Tracked-On: #3252
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from ioc
Tracked-On: #3252
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from virtio-block
Tracked-On: #3252
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from achi.
Tracked-On: #3252
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert for block interface.
'magic' is removed from block structure, as the user should make sure
the block device is created and not closed when access to it.
Tracked-On: #3252
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' usage to avoid possible software vulnerabilities
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
'assert' usage cleanup to avoid possible software vulnerabilities
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' usage to avoid possible software vulnerabilities.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' to avoid possible software vulnerabilities
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
- 'assert' cleanup to avoid possible software vulnerabilities.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' to avoid possible vulnerabilities.
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to clean up assert from virtio-net.
Tracked-On: #3252
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
This patch is to fix some potential memory leak issues
1, free mrp if the mmio_rb_lookup() function return 0;
2, free memory allocated by strdup in some error case handling.
Tracked-On: #3277
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Replace strlen function with strnlen function in DM
Tracked-On: #3276
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use strncpy instead of strcpy to avoid buf overflow.
Fix strncpy null-terminated issues.
Tracked-On: #3245
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Remove the use of assert() in passthrough driver.
Tracked-On: #3252
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
When FE virtio devices work in polling mode, sshd.service can't start
normally and blocks at generating random bytes. When reading from
the random source, getrandom() blocks caused by no random bytes.
Tracked-On: #3268
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
The patch adds new argument for launch_uos script for NUC.
In the patch add "-C" parameter for launch_uos script. When launch
the script with the parameter the ACRN-dm will be launched in the
runC container. For more information about this please refer to
ACRN-dm QoS document.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Binbin Wu binbin.wu@intel.com
Reviewed-by: Geoffroy Van Cutsem geoffroy.vancutsem@intel.com
when DM exit, it is better to call deinit_loggers
to do some cleanup work.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
also add "\n" in the end of each log.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
disk-logger used to save persistent log as file in disk.
log path: /var/log/acrn-dm/
each log file size is 2MB; default 8 log files; the log
files' suffix will be increased; when file count more than 8,
the last one added, the first one is removed, like form 1-8 to
2-9 to 3-10 ...
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
variables defined by struct logger_ops just used
in local file, so add static to them.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Old implementation does nothing when Stop Endpoint cmd is received,
it is not right. The new implementation will cancel all the libusb
requests in processing.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Change it to usb_dev_comp_cb, which is more accurate for what
it does. This patch doesn't change original program logic.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The old implementation processes isoch TRB one by one, this method
can't support scenario which needs high performance, such as real
time USB camera video.
New implementions will compose all the isoch TRBs for one Door Bell
Ring, and give them to libusb as a single request. The test result
shows that this method could greatly improve the porfermance.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The names for the two variables are too long, change to shorter
name. This patch doesn't change any logic, just clean up.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The chained field could help to describe the relationship of USB
data blocks.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Save the MaxPacketSize value for every endpoint of virtual
USB device.
Tracked-On: #3054
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Per ACRN RT VM design, there is no virtual IOAPIC and virtual PIC emulated for RT VM.
This commit removes the entries of IOAPIC, PIC, PPRT and APRT in ACPI table for RT VM.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
If you run two acrn-dm processes at the same time,
hugetblfs will be mounted twice, which will cause a memory leak.
The specific solution is :different virtual machines mount hugetblfs
into different directories.
Tracked-On:#2854
Signed-off-by: bing.li <bingx.li@intel.com>
Reviewed-by: Minggui Cao<minggui.cao@intel.com>
Acked-by: Yin Fengwei<fengwei.yin@intel.com>
Adding the feature of communication between VMs using virtio-console
based on appointed socket file. Not appointing the socket type will set
the socket type to be server in default.
Example:
Server: adding "-s 5,virtio-console,socket:console=/path/console.sock:server"
Client: adding "-s 6,virtio-console,socket:console=/path/console.sock:client"
Tracked-On: #3232
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Refine the virtio-console options parse code, so that no need to pass
all the variables as parameters to the backend adding function.
Tracked-On: #3232
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
- Cleanup unused and unsupported function of AcrnRtc
- Remove SMBIOS support
- Add ResetSystemLib for ACRN
- Disable BhyveFwCtlLib
- Disable COM2
- Avoid connecting all system drivers
- Speed up Ps2KeyboardDxe
- Created new Rtc driver and optimized RtcInit and RtcGetTime
- Initialize EmuVariable NV storage memory with varstore from ROM
- Switch to BasePciLibPciExpress
- Avoid exhaustive PCI bus scanning during PCI host bridge
initialization
- Add support for ACRN platform initialization
- Add ACRN's Host Bridge Device ID
Tracked-On: #3226
Signed-off-by: Peter Fang <peter.fang@intel.com>
Ignore SIGPIPE signal and handle the error directly when write()
function fails. this will help us to catch the write failure
rather than crashing the UOS.
PS: Observed that when acrnctl stop command was issued from
kata-runtime, UOS was crashing with SIGPIPE signal.
Tracked-On: #3190
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When virtio-console is used as console port with socket backend,
guest kernel tries to hook it up with hvc console and sets it up.
It doesn't check if a client is connected and can result in ENOTCONN
with virtio-console backend being reset. This will prevent client
connection at a later point. To avoid this, ignore ENOTCONN error.
PS: For Kata, the runtime first launches VM and then proxy which acts
as a client connects to this socket. If this error is not handled,
proxy will never be able to connect as the backend itself will be reset.
Tracked-On: #3189
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some physical bar sizes are not page aligned, in order to support them,
we map a bigger region which is page aligned.
Tracked-On: #3181
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
PCI spec says that the procedure of sizing a BAR is as follows:
1) disable the decode via command register
2) save the original value of BAR register
3) write all-1 to the BAR register
4) read BAR register back, calculate the size
5) restore the original value to BAR register
6) re-enable the decode via command register
Some driver does not disable the decode of BAR register via the
command register before sizing a BAR. This will lead to a overlay
of the BAR addresses when trying to register the intermediate
BAR address via register_bar. A stateful variable sizing is used
to keep track of such kind of BAR address changes and workaroud
this violation.
Currently this issue is only found when audio device is passed
through to Windows 10 guest. When it is fixed in the Windows
audio driver, this patch should be reverted.
v1 -> v2:
- change the commit message to add the procedure of BAR sizing from
PCI spec
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
In vxworks, virtio-console FE driver only initiate 2 virtqueues, but BE
creates 2+ virtqueues for it. So the rest of the virtqueues are not
initiated. vq->used->flags cannot be used directly without any
condition.
Tracked-On: #3203
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For PCI passthrough device when guest OS updates the BAR address
the corresponding EPT mapping should be updated as well.
Tracked-On: #2962
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Signed-off-by: Liu Shuo A <shuo.a.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Removed the entire vmcfg feature, these changes are made:
1.Deleted devicemodel/vmcfg/
2.Deleted devicemodel/include/vmcfg.h
3.Cleanup vmcfg in devicemodel/Makefile
Tracked-On: #3192
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Vmcfg is useless and should be removed. Before removing vmcfg code,
cleanup vmcfg APIs in core/main.c
Tracked-On: #3192
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reserved 128MB memory range for EPC resource in E820 table, starting
from 0x80000000.
Need to align the base address b/t DM and HV.
For hypervisor, the base address will be specified in epc field in
vm_configurations.c
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
VM Name length is restricted to 32 characters. kata creates
a VM name with GUID added as a part of VM name making it around
80 characters. So increasing this size to 128.
v1->v2:
It turns out that MAX_VM_OS_NAME_LEN usage in DM and HV are for
different use cases. So removing the macro from acrn_common.h.
Definied macro MAX_VMNAME_LEN for DM purposes in dm.h. Retaining
original macron name MAX_VM_OS_NAME_LEN for HV purposes but defined
in vm_config.h.
Tracked-On: #3138
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently, we use STR_LEN for all checking the size of all the
acrn-dm parameters. But some parameters like kernel boot args
can grow based on different needs. For example, when kata launches
guest VM using acrn, the kernel boot args increases by 256 bytes
(i.e 1024 +256).
Just increasing STR_LEN will unnecessarily increase allocations
for other acrn-dm parameters. So decoupling only boot_args
length and increasing it to 2048.
PS: If other parameters like ramdisk path, kernel path,
elf_path etc. don't need 1024 bytes, we can reduce STR_LEN
to 256 or 512 bytes.
Tracked-On: #3138
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The CCS bit of PORTSC register should be set according to the mapped
native port connection status, use xdev->devices if equal NULL is not
enough due to devices only be clear in disable slot which can't reflect
the native connection state in some gaps.
Tracked-On: #3163
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are many quirks in Intel xHCI implementation and it is very hard
to debug under Microsoft Windows OS, hence use ACRN xHCI extented
capabilities as the default setting.
Tracked-On: #3163
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Provide a minor fix for following issue:
Emulated USB controller Vendor ID and Device ID are swapped.
Tracked-On: #3053
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Xu, Anthony <anthony.xu@intel.com>
Hostbridge is necessary for passing kernel pci subsystem initialization
sanity check which is located in pci_sanity_check(). It will check
whether a host bridge exists.
BTW, set rtvm flag explicitly.
Tracked-On: #3152
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
As vm config tool will override the passthrough devices if run on
different hw, and it will take a lot of work to search and
replace the passthrough device.
This patch refine the passthrough devices that tools to overwrite.
Tracked-On: #3127
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
virtio_gpio_ops variable type is static,so use "+=" will let
the value keep increasing when acrn-dm reset.
Tracked-On: #3118
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: fuyongjie <fuyongjie@neusoft.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch tries to fetch max vcpu per vm from HV instead of hardcode in DM.
Tracked-On: #3116
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
for vm_name with vxworks_vm1 or zephyr_vm1 or vm1
grep "vm1" will match three of them, add -w option fix this issue
Tracked-On:#3081
Signed-off-by: zhangyun <yunx.zhang@intel.com>
This patch adds one sample script to launch Windows as guest.
Tracked-On: #3099
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
AcrnGT traps and intercepts the memory region defined by PCI bar in
service OS kernel driver. No need to register the bar associated region
in dm. By the way, some OS changes BAR start address and there is no
mechanism to reflect the gvt changes back to dm. It causes problem that
other devices may register new region which falls in GVT `old` region,
and leads to hypervisor crash.
v4: Add FIXME tag. It's a short term solution before migrated to OVMF
v3: rewording the comments
v2: removed unnecessary braces and use printf to log (Peter)
Tracked-On: #2976
Reviewed-by: He, Min <min.he@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Liu Xinyun <xinyun.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch add one sample script to launch VxWorks as guest.
Tracked-On: #3069
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
This patch adds support to trigger rescan of virtio-blk device by the
guest VM. This is an alternate to hot-plugging virtio-blk device.
This feature stems from the kata requirement, which hot-plugs container
rootfs after the VM is launched.
As part of virtio-blk rescan,
1. Update the backing file for the virtio-blk device with valid file.
Basically update the empty file (with dummy bctxt) that was passed
during VM launch.
2. Update virtio-blk device configurations for udpated backing file.
3. Update size associated with valid backing file in the config space.
4. Notify guest OS, of the new config change.
5. On this notification, guest will do the following.
(i). Update virtio-blk capacity.
(ii). Revalidate the disk.
(iii). Identify the newly plugged block device.
v5 -> v6:
- Removed use of dummy file and added a new parameter "nodisk"
to virtio-blk which indicates user wants to create a virtio-blk
device with dummy backend.
- Moved vm_monitor_rescan from pci core to virtio-blk as it currently
applies to only virtio-blk.
v4 -> v5:
- Reverted back logic, so that blkrescan is only supported when
VM is launched with empty backend file.
v3 -> v4:
- Close block context before allocating a new one
- Allow backend filepath with additional options to be more generic
- Remove blank lines introduced as part of previous patches.
v2 -> v3:
- Renamed vdev ops vdev_blk rescan to vdev_rescan
- Renamed montior ops virtio_blkrescan_ops to virtio_rescan_ops
- Consolidated virtio-blk configuration specific part into
a separate function
- Removed size requirement in acrnctl command.
v1 -> v2:
- Added more comments in the code.
- Renamed APIs from displug to blkrescan, inline with acrnctl cmd.
- Split the patch into two. This corresponds to changes in acrn-dm.
Tracked-On: #3051
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
add logger_setting params in launch_uos.sh for NUC & UP2;
then the logger system can work; by default console logger
is enabled.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
the logger setting can be input as acrn-dm params;
so need parse it to init logger system.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
kmsg logger used to output ACRN-DM log to /dev/kmsg,
it is easy to sync with kernel log.
it is better just output key info or error/failure
log to kmsg for kernel log size is limited.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
also set default logger as console and enabled.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
For Linux kernel, the UART driver will disable IER.THRE. But for Windows, it
will keep IER.THRE turn on then cause interrupt storm.
From pc16550d UART spec, INTR PIN description:
"Interrupt. This pin goes high whenever any one of the following interrupt types
has an active high condition and is enabled through the IER Receiver Error Flag;
Received Data Available timeout (FIFO Mode only); Transmitter Holding Register
Empty; and MODEM Status. The INTR signal is reset low upon the appropriate
interrupt service or a Master Reset operation."
And Interrupt Reset Control of Transmitter Holding Register Empty Interrupt
description:
"Reading the IIR Register (if source of interrupt) or Writing into
the Transmitter Holding Register"
The datasheet hasn't describe very clear if the THRE interrupt will be
re-generate after "Reading the IIR Register". We assume it will not do
that, so the THRE interrupt only generate when THR turn to empty.
This patch follows above assumption to resolve the interrupt storm cause WaaG
boot failed issue.
Tracked-On: #2713
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ACRN interepts vm_set/reset_ptdev_intx_info hypercalls to set
the SOS vdev properties to indicate it is assigned to UOS. Today,
upon vm_reset_ptdev_intx_info hypercall ACRN does not revert the SOS
vdev properties back to that of SOS, as vbdf and pbdf were not
part of the API. This would leave ACRN data structures in an incorrect
state
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When vm reset,the gpio line state is busy if we don't close the fd.
Tracked-On: #3028
Signed-off-by: fuyongjie <fuyongjie@vip.qq.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
With latest gcc, there are build error with current ACRN code.
Fixing could involve many code changes. We use gcc option to
remove build error as temperary workaround. And will fix the
build error one by one.
Tracked-On: #3010
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
When UOS set failling irq type, gpio BE will only request GPIOEVENT_REQUEST_FAILLING_EDGE
event from native gpio driver which will cause the last_level value is always 0.
So last_level can't be used to check whether interrupt should be injected or not.
It is the same for rising irq type.
v2: refine commit message.
Tracked-On: #3010
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: fuyongjie <fuyongjie@neusoft.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When the "i915.enable_gvt=0" is added for SOS kernel boot args, ACRN-DM will
fail in course of gvt initialization and errno is returned directly.
As the errno defined in linux/errno.h is positive, it will continue
the unexpected initialization in ACRN-DM and then the segment fault is
triggered.
So negative errno is returned in order to terminate the initialization.
Tracked-On: #2584
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
When acrn-dm is started by acrnd as a background process, STDIN is
redirected to journal. In this case mevent_add cannot be called on
the fd of STDIN.
Tracked-On: #2998
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
will access null pointer if 'gvt' is null.
Tracked-On: #1479
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
mmio_hint in mem.c can potentially be accessed concurrently in
emulate_mem() because it only holds a read lock. Use a local variable to
make sure the same entry address is used throughout the function. Since
it only serves as a hint, it's okay if the function does not use the
most up-to-date version of mmio_hint, as long as mmio_hint is accessed
atomically.
Explicitly enforce natural alignment on mmio_hint to guarantee atomic
accesses on x86 and increase code portability, even though compilers
most likely always do it.
Entries in the RB tree are only removed in unregister_mem_int() while
holding a write lock, so accessing mmio_hint while holding a read lock
is safe.
Tracked-On: #2902
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>