Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
remove board and scenario attributes dependency for new configuration.
To do:
will remove board and scenario attributes in all scenario XML files
and update the upgrader.py after the new configuration works.
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch includes:
1.add load_order(PRE_LAUNCHED_VM/SERVICE_VM/POST_LAUNCHED_VM) parameter
2.change vm_type parameter to values as RTVM, STANDARD_VM, TEE, REE
TEE and REE are hide in UI.
3.deduce vm severity in vm_configuration from vm_type and load_order
This patch not includes:
change for scenario_config and functions called by scenario_config about checking
v2->v3:
*Refine template load_order
v1->v2:
*Change variable name from vm_type to load_order
*Change LoadOptionType to LoadOrderType
*Change VMOptionsType to VMType
*Add TEE_VM/REE_VM description
*Refine acrn:is-pre-launched-vm
Tracked-On: #6690
Signed-off-by: hangliu1 <hang1.liu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The board configuration generator assumes all PCI BARs are programmed when
the board inspector runs, which is sometimes not the case. Unprogrammed
BARs will be reported using plain texts wrapped by angle brackets in the
output of `lspci`.
This patch gracefully skips the unprogrammed BARs and continues when
parsing the output of `lspci`, in order to avoid build-time failures due to
unprogrammed BARs.
Tracked-On: #6355
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
1. remove the board_private tag in the schema and all existing scenario XML files,
and remove the related value check about board_private.rootfs and bootargs.
2. merge board_private.rootfs and board_private.bootargs to os_config.bootargs.
and no change to the related contents of the .c/.h files except the order of
define SERVICE_VM_ROOTFS.
3. update the schema to make os_config.bootargs configurable for service VM in UI.
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Since PR #7002 has removed "pm_notify_channel" and "pm_by_vuart"
from acrn-dm usage, this patch also removes the two parameters
in the launch script generation logic.
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Since PR #7002 has removed some dynamic parameters from
acrn-dm usage, this patch also removes the following parameters
in launch script generation logic.
1. --vsbl <vsbl_file_path>
2. -s <slot>,npk
3. -i, --ioc_node <ioc_mediator_parameters>
4. -A, --acpi
5. virtio-ipu
6. virtio-audio
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
1. remove LOG_DESTINATION in the related python code, schema and
all existing scenario XML files.
2. for MEM_LOGLEVEL, NPK_LOGLEVEL and CONSOLE_LOGLEVEL,
update the loglevel range to [0, 5] from [0, 6].
Tracked-On: #6934
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add two VM flags for x86_tee. GUEST_FLAG_TEE for TEE VM,
GUEST_FLAG_REE for normal rich VM.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
1. remove CONFIG_KATA_VM, CONFIG_MAX_KATA_VM_NUM and KATA_VM
related code.
2. remove KATA_VM in scenario xml files.
3. remove KATA vm type in UI.
4. remove UUID DB.
5. remove uuid in the launch script generation logic.
6. use vmname to identify a vm. (eg: <name>ACRN_SOS_VM</name>)
add the check logic to ensure vm name is a must-set item, not duplicated,
and the string length is [1-15] and the whitespace is not allowed.
7. enlarge the max VM num to 32.
Tracked-On: #6685
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
1. ensure cpu affinity in launch xml is subset of its scenario settings.
2. cpu_affinity is a must have parameter for acrn_dm, if the user did not provide cpu affinity in launch xml, load it from scenario settings.
Tracked-On: #6724
Signed-off-by: Weiyi Feng <weiyix.feng@intel.com>
when we add two or more virtio block devices and rename them for a VM
in launch xml files, then generate launch scripts through the UI.
After ensuring the devices names are different, we repeat these operations
continuously. Finally we will get the duplicate PT_SLOT value 30 for
different virtio block devices in a launch script. This is wrong.
As a workaround, we reassign PT_SLOT variate to reset it after the launch
script is generated every time.
Tracked-On: #6767
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
1. remove hvlog parameter in bootargs for all platforms.
2. update HV_RAM_START default address from 2MB to 4MB.
3. add the check that the HV_RAM_START value should be larger
than or equal to 2MB and 2MB aligned.
Tracked-On: #6663
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Rename SOS_VM type to SERVICE_VM
rename UOS to User VM in XML description
rename uos_thread_pid to user_vm_thread_pid
rename devname_uos to devname_user_vm
rename uosid to user_vmid
rename UOS_ACK to USER_VM_ACK
rename SOS_VM_CONFIG_CPU_AFFINITY to SERVICE_VM_CONFIG_CPU_AFFINITY
rename SOS_COM to SERVICE_VM_COM
rename SOS_UART1_VALID_NUM" to SERVICE_VM_UART1_VALID_NUM
rename SOS_BOOTARGS_DIFF to SERVICE_VM_BOOTARGS_DIFF
rename uos to user_vm in launch script and xml
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add the VCAT_ENABLED element to RDTType so that user can enable/disable vCAT globally
Add the GUEST_FLAG_VCAT_ENABLED guest flag to enable/disable vCAT per-VM.
Currently we have the following per-VM clos element in scenario file for RDT use:
<clos>
<vcpu_clos>0</vcpu_clos>
<vcpu_clos>0</vcpu_clos>
</clos>
When the GUEST_FLAG_VCAT_ENABLED guest flag is not specified, clos is for RDT use,
vcpu_clos is per-CPU and it configures each CPU in VMs to a desired CLOS ID.
When the GUEST_FLAG_VCAT_ENABLED guest flag is specified, vCAT is enabled for this VM,
clos is for vCAT use, vcpu_clos is not per-CPU anymore in this case, just a list of
physical CLOSIDs (minimum 2) that are assigned to VMs for vCAT use. Each vcpu_clos
will be mapped to a virtual CLOSID, the first vcpu_clos is mapped to virtual CLOSID
0 and the second is mapped to virtual CLOSID 1, etc
Add xs:assert to prevent any problems with invalid configuration data for vCAT:
If any GUEST_FLAG_VCAT_ENABLED guest flag is specified, both RDT_ENABLED and VCAT_ENABLED
must be 'y'
If VCAT_ENABLED is 'y', RDT_ENABLED must be 'y' and CDP_ENABLED must be 'n'
For a vCAT VM, vcpu_clos cannot be set to CLOSID 0, CLOSID 0 is reserved to be used by hypervisor
For a vCAT VM, number of clos/vcpu_clos elements must be greater than 1
For a vCAT VM, each clos/vcpu_clos must be less than L2/L3 COS_MAX
For a vCAT VM, its clos/vcpu_clos elements cannot contain duplicate values
There should not be any CLOS IDs overlap between a vCAT VM and any other VMs
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Expand the capacity of legacy vuarts per VM. This change is applied to
manual scenario xml editing only.
A SOS VM can choose io port 0x3F8, 0x2F8, 0x3E8, 0x2E8 by selecting
SOS_COM1_BASE, SOS_COM2_BASE, SOS_COM3_BASE, SOS_COM4_BASE respectively.
Non SOS VM can choose io port 0x3F8, 0x2F8, 0x3E8, 0x2E8 by selecting
COM1_BASE, COM2_BASE, COM3_BASE, COM4_BASE respectively.
For any type of VM, selecting "CONFIG_COM_BASE" allows configuration tool
to pick an available io port from hardcoded list:
['0xA000', '0xA010', '0xA020', '0xA030', '0xA040', '0xA050', '0xA060', '0xA070']
A SOS VM can choose irq 4 by selecting SOS_COM1_IRQ and SOS_COM3_IRQ, and choose irq 3 by selecting SOS_COM2_IRQ and SOS_COM4_IRQ.
Non SOS VM can choose irq 4 by selecting COM1_IRQ and COM3_IRQ, and choose irq 3 by selecting COM2_IRQ and COM4_IRQ.
For SOS VM, selecting "CONFIG_COM_IRQ" allows configuration tool
to pick an available irq based on AVAILABLE_IRQ_INFO. For non SOS VM, it
will allocate an available irq from [1, 15].
Tracked-On: #6652
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
This patch adds a new priority based scheduler to support
vCPU scheduling based on their pre-configured priorities.
A vCPU can be running only if there is no higher priority
vCPU running on the same pCPU.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
The bdf of gpu is not 00:02.0 for the new platform icx-rvp,
it is 05:00.0 now, so we remove the hardcode 00:02.0;
And change to get the gpu bdf from board.xml.
Tracked-On: #6357
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
This patch renames the GUEST_FLAG_TPM2_FIXUP to
GUEST_FLAG_SECURITY_VM.
v2 -> v3:
The "FIXUP" suffix is removed.
Tracked-On: #6320
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Rename KERNEL_ZEPHYR to KERNEL_RAWIMAGE. Added new type "KERNEL_ELF".
Add CONFIG_GUEST_KERNEL_RAWIMAGE, CONFIG_GUEST_KERNEL_ELF and/or
CONFIG_GUEST_KERNEL_BZIMAGE to config.h if it's configured.
Tracked-On: #6323
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Using xml.etree.ElementTree to parse the untrusted data is known to
raise security issue. Replaced it using defusedxml.
Tracked-On: #6342
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
The subprocess module is needed for calling package from python script.
Add #nosec for subprocess module importing.
Tracked-On: #6342
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
ACRN used to prepare the vTPM2 ACPI Table for pre-launched VM at the build stage
using config tools. This is OK if the TPM2 ACPI Table never changes. However,
TPM2 ACPI Table may be changed in some conditions: change BIOS configuration or
update BIOS.
This patch do TPM2 fixup to update the vTPM2 ACPI Table and TPM2 MMIO resource
configuration according to the physical TPM2 ACPI Table.
Tracked-On: #6366
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
Update lpc slot to origin value 1 from 31 because GOP driver has assumption
to config space layout of the device on 00:1f.0.
Tracked-On: #6340
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Without this, the GUEST_FLAG_NVMX_ENABLED doesn't show up in the
drop-down list of "guest_flags" in the ACRN config GUI.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Refine get_pt_intx_table. The method parse the <pt_inx> of scenario and
append the pair of phys_gsi and virt_gsi if there is any.
Refine check_pt_intx. Add a condition that the method returns if the
phys_gsi and virt_gsi are empty dictionary.
Tracked-On: #6178
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Add flag "allow_trigger_s5" to launch script xmls. If this flag sets to
'y' and the poweroff_channel sets to "vuart1(pty)" or "vuart1(tty)", the
"allow_trigger_s5" will appends to the end of "--pm_notify_channel
uart".
Tracked-On: #6138
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Modify the initial value of PT_SLOT variable and
update the get slot logic that all device call the virtual_dev_slot function to get slot number directly.
Copy the launch_uos_id1.sh to launch_win.sh.
Tracked-On: #6072
Signed-off-by: Kunhui Li <kunhuix.li@intel.com>
Configure PTM in post-launched VM using <PTM> element. If the //vm/PTM
sets to 'y', pci_dev.c.xsl appends the virtual root port to
corresponding struct acrn_vm_pci_dev_config of that VM. Currently it
supports only post-launched VMs.
Configure enable_ptm for dm argument. If a uos/enable_ptm with uos id
= 'vm_id 'sets to 'y' and the vm/PTM with the same vm_id sets to 'y',
append an "enable_ptm" flag to the end of passthrough ethernet devices.
Currently there is only ethernet card can support the "enable_ptm"flag.
For the schema validation, the <PTM> can only be ['y', 'n'].
For the launched script validation, the <enable_ptm> can only be ['y',
'n']. If the <enable_ptm> sets to 'y' but the corresponding <PTM> sets
to 'n', the launch script will fail to generate.
Tracked-On: #6054
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
'psram' and 'PSRAM' are legacy names and replaced
with 'ssram' and 'SSRAM' respectively.
Tracked-On: #6012
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuang Zheng <shuang.zheng@intel.com>
This patch introduces the XML schema `datachecks.xsd` which is the central
place to specify and check assumptions on board characteristics and
scenario settings. Each assumption is expressed as an XSD assertion with
annotation of error severity (e.g. info, warning or error) and detailed
descriptions.
At compile time, the board and scenario XMLs are combined (by putting the
children of the root node together) can checked against the
schema. Assertion failures are categorized according to the defined
severity. Currently only errors will block compilation by outputing the
descriptions of the violated assertions.
The objective of this patch is the introduce the framework to document,
manage and check assumptions. A better way to present assumption violations
to end users (either on the command line or in the configuration editor) is
out of the scope of this series and will be considered in the future.
Tracked-On: #5922
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Refine the "append_node" which can add new node with an attribute and
return the appended node.
The method "get_node" finds the xpath value and return it if there is an
unique node exists, otherwise it returns None.
It is used to get an xpath element node or can determine the xpath existence.
The "get_text" is replaced with "get_node". The only get_text in
hv_ram.py is modified accordingly.
Tracked-On: #5980
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
remove UOS_RAM_SIZE and SOS_RAM_SIZE in scenario config since these
two config elements are useless.
Tracked-On: #5927
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
update HV_RAM_SIZE calculation algorithm to 20MB + VM number*
16MB, which consists of text segment rodata(2MB), bss data(about
1MB), bss.ppt_pages(2.4MB), bss.ctx_tables(6MB), bss.vm_array(
3.2MB), bss.ivshmem_base(2MB+1.8MB for alignment) and
bss.post_uos_sworld_memory(16MB*post-launched VM number).
Tracked-On: #5927
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
"is_tpm_passthru" would always return "False" with the existing logic.
1. Replace "get_leaf_tag_map_bool" with "get_leaf_tag_map". Instead returning a dictrionary with boolean diction values, just get the string value.
2. Return "True" if any vm has enabled the passtrhough tpm with option "y".
Tracked-On: #5710
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
app
change generic folder to generic_board folder in config app according
to the reorg data folders and update the method to save xmls.
Tracked-On: #5723
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Try validate the scenario xml against schema if the config.xsd exsists.
Fix the regular expression pattern of IVSHMEM_REGION string validation.
Tracked-On: #5672
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Remove vm_configs folder and move all the XML files and generic code example into config_tools/data
Tracked-On: #5644
Signed-off-by: Xie, nanlin <nanlin.xie@intel.com>
Geoffroy Van Cutsem