Use customized function to generate proper config.h
which depend on kconfig,write the customized format
to support it.
V1->V2:
Add comments.
Tracked-On: #861
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- Replace dynamic memory allocation with static memory
-- Remove the parameter check if the vm is NULL
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Commit 6085781 replaced __emalloc() with a call to uefi allocate_page()
and allows UEFI FW to allocate memory for hypervisor from high to low
address below 4GB. However, this change triggers an issue (might be
memory corruption), in turn, PXE boot cannot work.
Since root cause the issue might take some time, the PXE boot issue
blocks auto-test, we disable hypervisor relocation by default for the
time being in config option, and users can enable it by themselves. In
the following weeks, if we root cause the issue, we can re-enable
relocation feature.`
Tracked-On: #1371
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Currently, hypervisor doesn't have the information of pci devices
on the platform when init. In order to reduce boot time and memory
usage, hypervisor set a bus limitation for pci devices when init vtd.
However, maximum bus number varies on different platforms.
This patch add a config for the bus limitation.
Set 0xF as the default value for the maximum bus number on sbl platform.
Set 0xFF as the default value for the maximum bus number on uefi platfrom.
Tracked-On: #1339
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If CONFIG_CONSTANT_ACPI is true, then the value in host_acpi_info structure
is constant. Otherwise the host_acpi_info value could be overrided.
This is useful when platform ACPI table value is not fixed in Bootloader
before production.
In production release, this config should be set to yes.
Tracked-On: #1264
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To be sure hypervisor and DM are position independent
and executable.
Tracked-On: #1122
Signed-off-by: wenshelx <wenshengx.wang@intel.com>
Acked-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The npk_log is a log destination for the hypervisor, similar to the
console_log and the mem_log. It can be enabled/disabled/configured
by the SOS kernel via the hypercall HC_SETUP_HV_NPK_LOG.
The configuration includes:
1. Set the MMIO base address of the reserved NPK master.
2. Set the log level of the hypervisor NPK log.
After that, the npk_log can be enabled to write the hypervisor logs to
the MMIO address of the reserved NPK master with a simple header.
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Signed-off-by: Liu, Xiaojing <xiaojing.liu@intel.com>
Reviewed-by: CHEN Gang <gang.c.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Adding Kconfig option to choose and compile partitioning mode for ACRN.
Current implementation does not allow ACRN to support sharing mode
and partitioning mode out of a single binary.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
The relocation feature relies on the ld option "-z noreloc-overflow" which is
only available for binutils >= 2.27, while on Ubuntu 16.04 or older the default
version of binutils is 2.26.
This patch wraps the relocation code with a configurable macro and make it
undefined by default to avoid default build failures.
NOTE: This is just a hotfix. The code dropped with undefined CONFIG_RELOC needs
to be reviewed by the original author of this feature. Checks to the binutils
version will also follow up.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
- UEFI: change __emalloc() function to allocate from any available memory
under 4G
- Define CONFIG_RAM_START to the lowest possible address 1M, making sure
HV can only be relocated to higher address
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin fengwei <fengwei.yin@intel.com>
1. remove duplicated definitions of mem_loglevel/console_loglevel;
2. Set default loglevels to display important messages:
- CONSOLE_LOGLEVEL_DEFALUT is changed from 2 to 3;
- MEM_LOGLEVEL_DEFAULT is changed from 4 to 5.
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
This patch introduces a configuration symbol RELEASE for managing debug/release
build in a similar way to how we manage PLATFORM.
Note:
1. 'make defconfig RELEASE=1' will still use the CONFIG_RELEASE defined in the
default configuration. The 'RELEASE=1' option has no effect in this case.
2. 'make RELEASE=1' is backward-compatible and enforces a release version to be
built.
v1 -> v2:
* Pass RELEASE instead of CONFIG_RELEASE to silentoldconfig.py to avoid
unintended overriding of the value.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
Since .config has PLATFORM now, it is expected that the PLATFORM= command line
option is no longer necessary as long as a proper .config exists.
This patch implements this expectation. Now the platform to be selected is
determined by the following steps.
1. If PLATFORM= is provided on the command line, the specified value is
used.
2. If there is no PLATFORM= on the command line and PLATFORM is defined in
config.mk, its value is used.
3. If neither PLATFORM= on the command line nor config.mk is available, a
predefined default value is used.
v1 -> v2:
* 'make oldconfig' should not pass CONFIG_xxx to the script since config.mk
can be out-dated.
* Change the default value of PLATFORM to SBL for backward compatibility of
'make all'.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
- For UEFI boot, allocate memory for trampoline code in ACRN EFI,
and pass the pointer to HV through efi_ctx
- Correct LOW_RAM_SIZE and LOW_RAM_START in Kconfig and bsp_cfg.h
- use trampline_start16_paddr instead of the hardcoded
CONFIG_LOW_RAM_START for initial guest GDT and page tables
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
MTRR feature was added after commit bce7ed1715 ("HV: config:
add Kconfig and defconfigs"), so the generated config.h doesn't
include CONFIG_MTRR_ENABLED
Signed-off-by: Zide Chen <zide.chen@intel.com>
This patch converts the configuration entries (previously defined in
bsp/*/include/bsp/bsp_cfg.h) to a Kconfig script.
With the platform specified, the default values will be exactly those in the
corresponding bsp_cfg.h.
v4 -> v5:
* No changes.
v3 -> v4:
* No changes.
v2 -> v3:
* No changes.
v1 -> v2:
* No changes.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Mingqiang Chi