This patch adds xml file, both board as well scenario files
that are need to run ACRN on top of QEMU as a nested hypervisor.
Currently support is only for SDC scenario.
Tracked-On: #3198
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch sets defaults similar to generic platform configuration
when leaf features like PM_INFO, S3_INFO, S5_INFO, DRHD_INFO, CPU_BRAND,
CX_INFO, PX_INFO, MMCFG_BASE_INFO are not generated via either target
offline tool or user supplies empty field in case of emulation.
Tracked-On: #3198
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. not need 'clean' when building ACRN-HV/DM each time
2. correct efi-stub wrong dependency
Tracked-On: #2412
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Remove pre-launched VM console setting in scenario xml and leave it
configured in bootargs directly.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The bootarg of rootfs for pre-launched VM is for Linux only and it
should not limited to physical block device which is selectable from
native rootfs list, it might be a USB or RAM device that "X" is variable
in root=/dev/sdX or /dev/ramX. So remove the rootfs setting in XML and
leave it configured in kernel bootargs directly.
Given the SOS must be Linux and its rootfs must be a physical block
device, rootfs item tag is still reserved in xml for SOS VM section.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
remove configurable="0" for hybrid scenario pci_devs of Pre Launched VM.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
With current acrn-config code, there would be no pci_dev.c generated
if no PCI devices were selected. This would cause a bug for logical_partition
scenario because of an old pci_dev.c is already in the folder and involved
for compiling. The configure tool should override the pci_dev.c, in this case,
to avoid building error.
Tracked-On: #4813
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As VUART is not supported PCI VUART, use native PCI ttySn's IRQ for
VUART1 would cause communication failed, allocate a free IRQ for it.
Tracked-On: #4798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Use post_vm_id$(relative id) to identify each post-launched VM to
make sure simultaneous launching successfully.
Tracked-On: #4797
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add board xml and default scenario config xmls and launch config
xmls for ElkhartLake boards.
Tracked-On: #4798
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Assign the right acrn-dm arguments for "Soft RT/Hard RT" VMs by
'uos_type' in webUI item tag.
Tracked-On: #4799
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove "idle=halt" from SOS boot args since the param could be handled
automatically by acrn-config according to CPU scheduler setting.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Tools: cleanup acrn_mngr pause/continue message
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. Remove them from README.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. should be removed. Remove them from acrn_mngr.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. should be removed.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
If HV relocation is enabled, either ACRN efi-stub or GRUB relocates
hypervisor image above HPA 256MB, thus we put hvlog and ramoops buffer
under 256MB to avoid conflict with hypervisor owned address.
This patch hardcodes these addresses:
0xa00000 - 0xdfffff: 4MiB for ramoops buffer
0xe00000 - 0xffffff: 2MiB for hvlog buffer
However, user can customize them to other addresses as long as it's under
256MB, available in host e820, and SOS bootarg "nokaslr" is not specified.
If HV relocation is disabled, need to make sure that these buffer
addresses are not between HV_RAM_START and HV_RAM_START + HV_RAM_SIZE.
Tracked-On: #4760
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
With this patch, we relocate hypervisor image to HPA 256MB and above,
thus the hardcoded hvlog and ramoops buffer for SOS can safely reside at
addresses under HPA 256MB, given that 1:1 mapping between SOS GPA and HPA.
Tracked-On: #4760
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
enable gvtd for waag of nuc7/nuc6 board by default.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For nuc7/nuc6/whl-ipci5/whl-ipc-i7 board, add 4 POST_STD_VM and 1
KATA_VM in their industry config xmls, and assign PCPU0-1 to these
PRE_LAUNCHED_VM.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Parse KATA VM count number from scenario config with vm_type 'KATA_VM'
and Remove MAX_KATA_VM_NUM from scenario config xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When passthrough device for VM, if there is no fun0 of the slot was passed
in, PCI expansion card can not respond as a device, it must implement at
least function number 0.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine CPU affinity sanity check for both scenario and launch config
xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refinement for VM type sanity check relays on VM UUID number.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
remove configurable="0" for pci_devs of pre-launched VM so that the
passthru devices could be configurable on webUI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Parse cpu_affinity from launch config xmls and generate '--cpu_affinity' as
acrn-dm args.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1.Remove cpu_sharing item from launch config xml.
2.Add cpu_affinity for launch config xmls to configurable POST VM cpu
affinity from webUI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Change the tag name from "vcpu_affinity" to 'cpu_affinity" in all the per
board scenario xml files, and change the descritpions.
Tracked-On: #4641
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
hypervisor is replacing vm_configs[].vcpu_affinity[] array with
cpu_affinity_bitmap, the meaning of which has some changes as well.
This patch changes the names in generated vm_configuration.c:
-.vcpu_affinity = VMx_CONFIG_VCPU_AFFINITY,
+.cpu_affinity_bitmap = VMx_CONFIG_CPU_AFFINITY,
Changes in vm_configuration.h:
-#define VMx_CONFIG_VCPU_AFFINITY {AFFINITY_CPU(xU), AFFINITY_CPU(xU)}
+#define VMx_CONFIG_CPU_AFFINITY (AFFINITY_CPU(xU) | AFFINITY_CPU(xU))
Also don't generate default assignment of vcpu_num in vm_configuration.c,
because now hypervisor can easily calculate it from cpu_affinity_bitmap.
Accordingly, in the scenario xml files, tag "vcpu_affinity" is changed
to "cpu_affinity".
Tracked-On: #4641
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When dynamically creating or adding or deleting VMs, acrn config app
will assign VM IDs for the VMs with the orders of prelaunched VMs and SOS
VM and postlaunched VMs to be consistent with the VM order of vm_configs
in vm configuration. When dynamically creating launch scripts, acrn
config app will let users to specify the VM ID before launch setting.
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
There are no board/scenario/uos_launcher attributes for created
scenario and launch settings, which causes xml mismatch error
when generating configuration files or launch scripts.
This patch is to add the attributes for scearnio and launch
settings.
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add max VM count check when generating scenario XML file.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Refine some items for configuarable="0"
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add 2 UUIDs for post-launched Standard VM.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Add SOS_IDLE for SOS cmdline so that "idle=halt" paramter will be needed
only when CPU sharing is enabled;
Tracked-On: #4329
Signed-off-by: Victor Sun <victor.sun@intel.com>
Enhance and fix some typos in the text that gets printed out from the
board_parser.py script.
Tracked-On: #4630
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Remove sdc2 scenario since the VM launch requirement under this scenario
will be satisfied by industry scenario.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Leave HV_RAM_SIZE/HV_RAM_START default to blank, and config tool would
generate for them, otherwise, they would be set by the UI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Leave HV_RAM_SIZE/HV_RAM_START default to blank, and config tool would
generate for them, otherwise, they would be set by the UI.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Set default value for HV template.
2. Refine vuartx in template vm setting xmls.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. modify epc_section to configurable="0".
2. add 'idle=halt' for sos bootargs to impove performance.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
UI got syntax warning while loading new logical partitons xml, add
missed '</clos>' for it.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently, '--out' is relative scripts run dir if it gets relative path,
Refine '--out' to source root tree if it gets relative path.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Pre-Launched VMs need the vbar_base values pre-populated
for pass-thru PCI devices.
This patch moves the pci parser logic from board_cfg_gen to library
so that scenario_cfg_gen scripts can use pci parser routines while
generating pci_dev file logical partition scenario.
Tracked-On: #4666
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
The patch enables CPU sharing feature by default, the default scheduler is
set to SCHED_BVT;
Tracked-On: #4661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Vijay Dhanraj