Add new build target for hybrid mode with uefi on platform apl-up2.
Also break long dependency target line to short one.
Tracked-On: #3779
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
To remove several duplicated Makefile cmdline, introduce the
functions to build/install acrn.
If we need to add new build to sbl-hypervisor (which is used
by integration team), we only need to define a new target and
call acrn build/install functions with correct parameters. And
then make sbl-hypervisor depend on that new target.
Tracked-On: #3779
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Previously we generate config patch based on config xml in toplevel Makefile,
it brings two issues:
1. we could not generate xml configuration patch with hypervisor source only;
2. The github commit info of current code base which is defined in version.h
will be overwritten by the new generated config patch, then the lost commit
info would impact build identify and bug reproducing.
This patch fixed these two issues. Besides, the patch also modify the logic of
platform_acpi_info file existence judgement, which need to be depends on the
acrn-config patch.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
1. if SCENARIO=$(SCENARIO) is specified in make param, then override
the default CONFIG_$(SCENARIO) value in existed .config. This means
we don't need to modify the default SCENARIO config in Kconfig file
to build the hypervisor;
2. Some board name shortcuts like apl-nuc/kbl-nuc-i7 need to be converted
to official board name to make sure overrides working;
3. Previously make sbl-hypervisor did not load the defconfig so the
defconfig for boards are lost, this patch fix this issue;
4. remove SCENARIO param when make hypervisor, because SCENARIO could
be got from SCENARIO_NAME which parsed from .config;
Tracked-On: #3593
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
1. This patch enabled one path for compiling the souce code which
generated by acrn-config tools.
The usage below:
$ make hypervisor BOARD_FILE=$(board.xml) SCENARIO_FILE=$(scenario.xml)
if BOARD_FILE and SCENARIO_FILE are not specified, fallback to previous
compiling hypervisor usage:
$ make hypervisor BOARD=$(board) SCENARIO=$(scenario)
v1-v2:
1). update commit message
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
We are trying to add both industry and sdc images to CL build. To
maintain the build interface unchanged (no change from CL side), we
extend the build command to generate the different target images.
To identity different images, we use rule:
$(HV_FILE).$(BOARD).$(FIRMWARE).$(SCENARIO)
as target image file name.
Tracked-On: #3593
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
The top-level Makefile white-lists BOARDs require to generate UEFI
executable, but more UEFI BOARDs have been supported since then.
As a result, the build instructions in existing documents may not be
sufficient for those new BOARD targets, if the reader misses to supply
the FIRMWARE variable while building the hypervisor.
Instead of adding new UEFI BOARD types using the original long if-else
statements, I'd like to propose to white-list SBL BOARD types, and add
the new SBL BOARD types to the list while needed.
Tracked-On: #3541
Signed-off-by: Tonny Tzeng <tonny.tzeng@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Add to include acrn.32.out during cl rpm
generation as acrn.(board).32.out
This is required for Hybrid mode bringup in multios
Tracked-On:#3487
Signed-off-by: Nikhil Rane <nikhil.rane@intel.com>
This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build
Tracked-On: #3482
Signed-off-by: Terry Zou <terry.zou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
PLATFORM is no longer used and is replaced with BOARD.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add sos_vm.h as a template in configs folder and is linked to
configs/$(CONFIG_BOARD)/sos_vm.h.
If customer need a board specific sos_vm.h, make a copy in
configs/$(CONFIG_BOARD)/ and replace the symbol link.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The Kconfig file of UP2 board was named as up2.config, rename to apl-up2.config
to make it consistent with naming of apl-mrb/kbl-nuc ...
The name change is also applied in Makefile to make sure compile success.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The ASL_COMPILER macro is hard coded as /usr/sbin/iasl, it is
complained by some developers. This patch changes it to a
flexible way, by which the following make command lines are
supported:
make
make devicemodel
make ASL_COMPILER=/path/to/iasl
make ASL_COMPILER=/path/to/iasl devicemodel
Tracked-On: #2298
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Using 'make' directly means that the jobserver environment variables don't get
passed down, so sub-builds for example don't use -j.
This is documented as the wrong thing to do:
https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable
Use $(MAKE) instead, and compile times drastically improve:
acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s
Tracked-On: #2370
Signed-off-by: Ross Burton <ross.burton@intel.com>
Currently, we support SBL on two different boards.
So build and install them all in E2E build.
Tracked-On: #2344
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
This will be consistent with naming of apl-mrb/kbl-nuc ...
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
BOARD&FIRMWARE are wrong When 'make sbl-hypervisor-install' w/o parameters
due to default platform is uefi. So set them clearly.
Tracked-On: #1995
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
PLATFORM is deprecated, let's use it only for board detection
Tracked-On: #1995
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
1. use RELEASE to control ./tools install target.
Tracked-On: #2168
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Combination of BOARD and FIRMWARE is a more precious definition.
And we decide PLATFORM_XXX based on FIRMWARE, remove relative one in
board config.
We reserve PLATFORM for backward compatibility.
Tracked-On: #1995
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Yin Fengwei < fengwei.yin@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
misc now has a new home: https://github.com/intel/ioc-cbc-tools.
The "Execstop" patch will be synced to new git tree soon.
ioc-cbc-tools was just added to Clear Linux, and will be added to
software-defined-cockpit bundle after this patch merged.
Merging this patch may cause some IOC releated feature block until we
get a new Clear Linux release. This is the switch window ...
Signed-off-by: Alek Du <alek.du@intel.com>
there is no git repo, which download from github release,
however, acrn-dm -v will get tag info from this repo, in
such case, the tag info was null.
this patch will fix nul tag, which get it from CL mock build.
Tracked-On: #676
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch adds a new target to build the documentation
from the top-level directory. Here is how to use it (from
the top-level source directory):
$ make doc
Or
$ make O=build-test doc
To clean all documentation build artefacts, simply call
$ make clean
Or
$ make O=build-test clean
Calling 'make' with no arguments will *not* build the
documentation by default.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add a Makefile under ./tools to avoid changing top-level Makefile frequently
Acked-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
This patch adds build architecture for misc directory and support cbc_lifecycle
build.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Adapt dm-monitor and acrnctl to use the helper functions and new message
definitions in acrn_mngr.h.
These jobs must be done in one commit to avoid build problems:
1. message transmission and callback registration code are moved
to libacrn-mngr.a, so old functions in dm-monitor could be removed to
make code clean;
2. remove unnecessary monior_msg.h;
3. minor changes to acrnctl accordingly.
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Wang, Yu <yu1.wang@intel.com>
signed-off-by: Yan Like <like.yan@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
To build with only one command the sbl and efi hypervisor a target was
added which build the SBL hypervisor version.
Now you can call "make all sbl-hypervisor" and
"make install sbl-hypervisor-install"
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
This patch adds the service files, config files and script
to run automatically at boot. And it adds install/uninstall
part in Makefile. Compatiblity code for libsystemd.so and
libsystemd-journal.so is added in Makefile also.
Signed-off-by: Jin Zhi <zhi.jin@intel.com>
Signed-off-by: CHEN Gang <gang.c.chen@intel.com>
Reviewed-by: Zhang Yanmin <yanmin.zhang@intel.com>
Reviewed-by: Liu Chuansheng <chuansheng.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
The 'ROOT_OUT' variable does not allow to set the folder in
which all output files (objects, binaries, etc.) are built
and placed.
Overriding it from the command-line leads to 'build' folders
of the name set that are created in the tree eventually leading
to a failure during the build. This patch changes how the
output directory is constructed so that *all* output files
are put in there. It introduces a new variable called
'BUILD_DIR' to that effect.
It also incidentally fix the fact that 'make clean' only removes
that output directory which means it does not properly clean up
the tree if one overrides the 'ROOT_OUT' variable manually today.
To change where the build artefacts are placed, set 'BUILD_DIR'
to whatever you want, e.g.:
$ make BUILD_DIR=build-test
Will create a top-level folder called 'build-test' where everything
will be put. 'make clean' will remove it (if called with the same
argument)
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The variable PLAT was renamed to PLATFORM, but was not updated in the
install target giving a failure when installing ACRN hypervisor.
Fixes: fc2b6fbe86 ("Makefile: keep using 'PLATFORM' variable for existing documentation")
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
The make install target was missing. This commits adds the intall target
which uses the install target from subprojects.
Also a make install target was created in each tool program.
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Instead of changing directories with "cd" command use the
-C parameter to change directory.
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
it can be used as following:
make ==> to make hypervisor & devicemodel & tools
also modify tools makefile to support out-dir setting.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jack Ren <jack.ren@intel.com>
Yin Fengwei