As VIRTIO_CONFIG_S_NEEDS_RESET is not defined in standard virtio header
file on ubuntu, there will be compile issue. so add
VIRTIO_CONFIG_S_NEEDS_RESET to fix it.
Tracked-On: #2145
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Reuse linux common virtio header file and remove the repetitive
definition.
Tracked-On: #2145
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Device trap has great impact on latency of real time (RT) tasks.
This patch provide a virtio poll mode to avoid trap.
According to the virtio spec, backend devices can declare the
notification is not needed so that frontend will never trap.
This means the backends make commitment to the frontends they have a
poll mechanism which don’t need any frontends notification.
This patch uses a periodic timer to give backends pseudo notifications
so that drive them processing data in their virtqueues. People should
choose a appropriate notification peroid interval to use this poll
mode. Too big interval may cause virtqueue processing latency while
too small interval may cause high SOS CPU usage. The suggested interval
is between 100us to 1ms.
The poll mode is not enabled by default and traditional trap
notification mode will be used. To use poll mode for RT with interval
1ms. You can add following acrn-dm parameter.
--virtio_poll 1000000
Tracked-On: #1956
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
It is preferred to state the absence of a return value explicitly in the
doxygen-stile comments. Currently there are different styles of doing this,
including:
@return None
@return NULL
@return void
@return N/A
This patch unifies the above with `@return None`.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Some virtio ring structures and virtio feature bits are using the
same name/definition as those in kernel header files(linux/
virtio_ring.h, linux/virtio_config.h). Kernel header files must
be included to perform ioctls to support vhost. There are
compiling errors due to duplicated definitions. In this patch
the following renamings are done:
VRING_DESC_F_NEXT -> ACRN_VRING_DESC_F_NEXT
VRING_DESC_F_WRITE -> ACRN_VRING_DESC_F_WRITE
VRING_DESC_F_INDIRECT -> ACRN_VRING_DESC_F_INDIRECT
VRING_AVAIL_F_NO_INTERRUPT -> ACRN_VRING_AVAIL_F_NO_INTERRUPT
VRING_USED_F_NO_NOTIFY -> ACRN_VRING_USED_F_NO_NOTIFY
VIRTIO_F_NOTIFY_ON_EMPTY -> ACRN_VIRTIO_F_NOTIFY_ON_EMPTY
VIRTIO_RING_F_INDIRECT_DESC -> ACRN_VIRTIO_RING_F_INDIRECT_DESC
VIRTIO_RING_F_EVENT_IDX -> ACRN_VIRTIO_RING_F_EVENT_IDX
VIRTIO_F_VERSION_1 -> ACRN_VIRTIO_F_VERSION_1
vring_avail -> virtio_vring_avail
vring_used -> virtio_vring_used
vring_size -> virtio_vring_size
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
currently, each virtio device has their own virtio_ops implementation.
Take virtio-blk for example:
static struct virtio_ops virtio_blk_ops = {
"virtio_blk",
1,
sizeof(struct virtio_blk_config),
virtio_blk_reset,
virtio_blk_notify,
virtio_blk_cfgread,
virtio_blk_cfgwrite,
NULL,
NULL,
VIRTIO_BLK_S_HOSTCAPS,
};
If start DM with two virtio-blk, this global variable will be
assigined to two virtio-blk instances. Changing hv_caps for one
instance will affect others. But different instances may need
different capabilities.
To support this requirement, we suggest to move hv_caps to
virtio_base structure, and each instance can return their own
capabilities.
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Fixes a recent PR #311 that added a new API but the doxygen comments for
one of the parameters didn't match the parameter name.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The VIRTIO_PCI_CAP_PCI_CFG capability creates an alternative access
method to the common configuration, notification, ISR and device-
specific configuration regions.
To access a device region, the driver writes into the capability
structure (ie. within the PCI configuration space) as follows:
- The driver sets the BAR to access by writing to cap.bar
- The driver sets the size of the access by writing 1, 2 or 4 to
cap.length
- The driver sets the offset within the BAR by writing to cap.offset
At that point, pci_cfg_data will provide a window of size cap.length
into the given cap.bar at offset cap.offset.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The following are done in virtio_input_init:
- parse the command line to get the path of host evdev
- parse the command line to get the optional serial string
- calloc struct virtio_input and initialize it
- call virtio framework APIs to initialize virtio PCI
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Virtio 1.0 introdues a generation number for the device-specific
configuration. It should be increased every time the configuration
noticeably changes.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When the device has experienced an error from which it cannot
re-cover, DEVICE_NEEDS_RESET is set to the device status register
and a config change intr is sent to the guest driver.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Virtio modern changed the virtqueue cofiguration precedures. GPA
of descriptor table, available ring and used ring are written to
common configuration registers separately. A final write to
Q_ENABLE register triggered initialization of the virtqueue on
the backend device.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
virtio_set_modern_bar is an external interface that backend virtio
driver can call to initialize the PCI capabilities and PCI bars
defined in the virtio 1.0 spec.
The following are done in the function:
- 5 PCI capabilities are added to the PCI configuration space of the
virtio PCI device. (common/isr/device_specific/notify/cfg_access)
- A 64-bit MMIO bar is allocated to accommodate the registers defined
in the 4 PCI capabilities. (cfg_access capability does not require
MMIO.)
- If use_notify_pio is true, a PIO notify capability is added to the
PCI configuration space and a PIO bar is allocated for it
accordingly.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Struct virtio_base and struct virtio_vq_info are expanded to support
virtio 1.0 framework. The BAR layouts of virtio legacy/transitional/
modern are introduced as well.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds virtio 1.0 data structures and macros according to
virtio spec v1.0 cs4. Part of them are referenced from Linux's
BSD-licensed include/uapi/linux/virtio_pci.h
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Some virtio PCI devices can change the device configuration state, as
reflected in the device-specific configuration region of the device. In
this case:
* If MSI-X capability is disabled:
1. Set the second lower bit of the ISR Status field for the device
2. Send the appropriate PCI interrupt for the device.
* If MSI-X capability is enabled:
1. If config_msix_vector is not NO_VECTOR, request the appropriate
MSI-X interrupt message for the device, config_msix_vector sets
the MSI-X Table entry number.
A single interrupt MAY indicate both that one or more virtqueue has been
used and that the configuration space has changed.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Conghui Chen