Virtio 1.0 introdues a generation number for the device-specific
configuration. It should be increased every time the configuration
noticeably changes.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When the device has experienced an error from which it cannot
re-cover, DEVICE_NEEDS_RESET is set to the device status register
and a config change intr is sent to the guest driver.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Virtio modern changed the virtqueue cofiguration precedures. GPA
of descriptor table, available ring and used ring are written to
common configuration registers separately. A final write to
Q_ENABLE register triggered initialization of the virtqueue on
the backend device.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
virtio_notify_cfg_write is called when guest driver performs virtqueue
kick by writing the notificaiton register of the virtqueue.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Registers in the isr configuration region are read-only.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the read/write callbacks for the registers in the
device-specific region. This region is implemented in the modern MMIO
bar.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the read/write callbacks for the registers in the
common configuration region. This region is implemented in the modern
MMIO bar.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the generic PCI barread/barwrite callbacks.
Specific barread/barwrite interfaces are called based on the baridx.
Virtio legacy devices, transitional devices and modern devices can
be handled in an unified way.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
virtio_set_modern_bar is an external interface that backend virtio
driver can call to initialize the PCI capabilities and PCI bars
defined in the virtio 1.0 spec.
The following are done in the function:
- 5 PCI capabilities are added to the PCI configuration space of the
virtio PCI device. (common/isr/device_specific/notify/cfg_access)
- A 64-bit MMIO bar is allocated to accommodate the registers defined
in the 4 PCI capabilities. (cfg_access capability does not require
MMIO.)
- If use_notify_pio is true, a PIO notify capability is added to the
PCI configuration space and a PIO bar is allocated for it
accordingly.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Struct virtio_base and struct virtio_vq_info are expanded to support
virtio 1.0 framework. The BAR layouts of virtio legacy/transitional/
modern are introduced as well.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds virtio 1.0 data structures and macros according to
virtio spec v1.0 cs4. Part of them are referenced from Linux's
BSD-licensed include/uapi/linux/virtio_pci.h
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pci_emul_add_capability is needed by virtio 1.0 framework to add
pci vendor capability from outside of pci core.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The trusty enabled or not will be passed to HV
with create vm hypercall. It's passed to vSBL within
config page also.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
acrnlog should run automatically at boot.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
acrnlog is an SOS userland tool to capture ACRN hypervisor log
to /tmp/acrnog/. Two kinds of logs would be saved:
- log of current running;
- log of last running if crashed and logs remaining.
[Usage] acrnlog [-s] [size] [-n] [number]
[Options]
-h: print this message
-s: size limitation for each log file, in MB.
0 means no limitation.
-n: how many files you would like to keep on disk
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Script usage:
[Usage] acrnalyze.py [options] [value] ...
[options]
-h: print this message
-i, --ifile=[string]: input file
-o, --ofile=[string]: output file
--vm_exit: to generate vm_exit report
Note: bash and python2 are required.
Example:
Assumed trace data have been copied to /home/xxxx/trace_data/20171115-101605
# acrnalyze.py -i /home/xxxx/trace_data/20171115-101605/0 -o /home/xxxx/trac
e_data/20171115-101605/cpu0 --vm_exit
- "--vm_exit" specify the analysis to do, currently, only vm_exit analysis
is supported.
- A preprocess would be taken out to make the trace data start and end with
an VM_ENTER, and a copy of original data file is saved with suffix ".orig";
- Analysis report would be given on the std output and in a csv file with
name specified via "-o outpu_file";
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
acrntrace: is an debug tool running on SOS to capture trace data.
Usage:
1) Start tracing
Capture buffered trace data:
# acrntrace
or clear buffer before tracing start:
# acrntrace -c
A folder will be created to save the trace data files are under
/tmp/acrntrace/, named with time string.
Eg: /tmp/acrntrace/20171115-101605
2) Stop tracing
# q <enter>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we could use option:
-s 3,virtio-blk,/XXXX_vdisk_file,b
to show this virtio device is boot device for guest.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Some guests needs guest partition info passed to support
A/B boot. DM needs to load guest partition info from file
and pass to vsbl.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are two things here:
1. Enable basic vsbl boot functionality.
2. add long option to DM to specific vsbl file. So DM could
choice to boot guest with vsbl.
It's hard to find a suitable short option. So only long option
is supported for vsbl file name option.
If long option "--vsbl='vsbl_file_name'" is given in DM
commandline, the "vsbl_file_name" will be loaded by DM
first and running. vsbl will be response to lead guest to
next boot stage.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Will update e820 table to mark the address ACPI specific type.
Also need pass ACPI table start address and size to vsbl.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
To align with file name, acrn_sw_load_direct() is changed
to acrn_sw_load_bzimage().
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
gcc8 showed following errors when build DM:
error: argument to ‘sizeof’ in ‘strncpy’ call is the same
expression as the source; did you mean to use the size of the
destination? [-Werror=sizeof-pointer-memaccess]
It looks like wrong parameter was given to strncpy.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The common loader code is put to sw_load_common.c
The loader code for directly kernel loading is put to sw_load_bzimage.c
The further change for SBL will be put to sw_load_sbl.c
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
New compiler options introduced by commit
519c4285cf will cause DM compile failure
which caused by warnings from some snprintf usage might be truncated.
Expanding the string buffer to make compiler happy.
v3: change format string
v2: Address comment from Hao, shrink bident string size to satify
tname length in blockif_open.
Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Some virtio PCI devices can change the device configuration state, as
reflected in the device-specific configuration region of the device. In
this case:
* If MSI-X capability is disabled:
1. Set the second lower bit of the ISR Status field for the device
2. Send the appropriate PCI interrupt for the device.
* If MSI-X capability is enabled:
1. If config_msix_vector is not NO_VECTOR, request the appropriate
MSI-X interrupt message for the device, config_msix_vector sets
the MSI-X Table entry number.
A single interrupt MAY indicate both that one or more virtqueue has been
used and that the configuration space has changed.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
IPU devices are using I2C device with physical BDF 0:16.0.
The I2C controller has the dependency on ACPI info.
This patch is to add ACPI info for the I2C controller and the two IPU
devices that are under the scope of I2C.
Note:
This patch is specific for GP platform.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Linux kernel CF9 reboot is doing things like:
- read value from 0xcf9
- mask out the value according to the reboot type (warm vs cold)
- BIT OR the value with reboot code
- write the value to 0xcf9
If there are two reboot event and the first one is cold
reboot and the second one is warm reboot, vsbl query
reboot type after the second one and will get code reboot
instead of warm reboot.
We should clear the data of 0xcf9 if guest request cold reboot.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
There are bootloaders require cold reboot as ACPI reboot
instead of warm reboot.
So we set 0xE to reset value of FADT to make ACPI reboot
cold reboot.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
RELRO rearranges the data sections inside an ELF
executable. It also marks certain areas as 'read-only'
so that these data structures cannot be overwritten while
the process is running.
Tracked-On: 224003
Signed-off-by: wenshelx <wenshengx.wang@intel.com>
Enable stack-proctector-strong option for gcc emiting
extra code to check buffer overflow.
Enable noexecstack option for marking the object as not
requiring executable stack.
Tracked-On: 224003
Signed-off-by: wenshelx <wenshengx.wang@intel.com>
Writing PCIR_BIOS is to get PCI ROM resource length. Ingore the request
as it's not support currently. Else, guest might get wrong information
about the PCI ROM resource.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
* Convert the README file to reStructuredText (ReST)
* Add more details (such as build dependencies) for Fedora 27
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The demos scripts are not installed when "make install" is invoked.
This patch adds a rule to copy them to /usr/share/acrn
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Jian Jun Chen