The init page tables installed in either cpu_primary.S or trampoline.S
are 1:1 mapping and won't be changed in the future.
The 'actual' hypervisor page table installed in enable_paging() is 1:1
mapping currently but it could be changed in the future. Both hva2hpa() and
hpa2hva() are implemented based on these page tables and can't be used
when the init page tables take effect.
This patch does the following cleanup:
- remove all hva2hpa()/hpa2hva() before calling enable_paging()
- get_hv_image_base() returns HVA, not HPA. So add hva2hpa() for all cases
that are called afte enable_paging().
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
to validate the ID and state of vCPU in below functions:
- hcall_set_vcpu_regs()
- hcall_notify_ioreq_finish()
- shell_vcpu_dumpreq()
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch simplifies `get_primary_vcpu` and `vcpu_from_vid`.
The target_vcpu could be get from the index directly.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vcpu returned by get_primary_vcpu API is BSP vcpu of the VM. So
checking is_vcpu_bsp on vcpu is redundant.
Tracked-On: #2668
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
it removes hypervisor.h and just includes needed header files.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This issue is triggered when launch fuzzing test.
Fuzzing test thread will call destroy_vm(IC_DESTROY_VM)
to set the guest vCPU state to VCPU_ZOMBIE then VCPU_INIT
and then VCPU_OFFLINE, it will cause post-work can't resume
the guest vCPU and can't changes the state of the
corresponding I/O request slot to REQ_STATE_FREE.
so replace improper use of ASSERT with return error code.
Tracked-On: #2606
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is a modified one. It removes the usage
of acrn_vm struct from inside vtd.c.
It also puts struct iommu_domain inside vtd.h,
from vtd.c.
It modifies the signature of init_iommu_domain
in order to remove dependency on acrn_vm from
inside vtd.c.
Incorporated comments from Jason and Eddie.
Changed the name of sos_vm_domain to
fallback_iommu_domain
Removed any reference of sos_vm from vtd.[c|h]
files, including comments.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
- add e820 info in struct acrn_vm;
- rename rebuild_sos_vm_e820() to create_sos_vm_e820();
- add create_prelaunched_vm_e820() for partition mode;
- rename create_e820_table() to create_zeropage_e820() and merge for
both sharing mode and partition mode;
- move create_xxx_vm_e820() to vm.c;
- move create_zeropage_e820() to vm_load.c;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vlapic_deliver_intr to vlapic_receive_intr: ioapic/msi device
deliver an interrupt to lapic.
Rename vlapic_pending_intr to vlapic_find_deliverable_intr: find a
deliverable interrupt which pending in irr and its priority large than ppr.
Rename vlapic_intr_accepted to vlapic_get_deliverable_intr: get the deliverable
interrupt from irr and set it in isr (which also raise ppr update)
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Panic should only be used when system booting. Once the system boot done,
it could never be used. While ASSERT could be used in some situations, such
as, there are some pre-assumption for some code, using ASSERT here for debug.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@inte.com>
move 'struct e820_entry' 'E820_TYPE_XXX' from mmu.h
to e820.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For VM with local apic pt for realtime scenatios, we support virtio device with PMD backend.
But we still need to inject MSI to notify the front-end, to avoid changing the front-end drivers.
Since the lapic is passed through, irq injection to vlapic won't work.
This commit fix it by sending IPI with vector need to inject.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit extend lapic pass-through for DM launched VM, generally for hard RT scenarios.
Similar to the partition mode, the vlapic is working under the xapic mode at first, only
when x2apic mode is enabled, lapic is passed through, because the physical LAPICs are
under x2apic mode.
Main changes includes:
- add is_lapic_pt() to check if a vm is created with lapic pt or not, to combine
codes of partition mode and DM launched vm with lapic passthrough, including:
- reuse the irq delievery function and rename it to dispatch_interrupt_lapic_pt();
- reuse switch_apicv_mode_x2apic();
- reuse ICR handling codes to avoid malicious IPI;
- intercept ICR/APICID/LDR msr access when lapic_pt;
- for vm with lapic passthrough, irq is always disabled under root mode.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
after compile, the compiled code could change rsp, so use pure asm code
to avoid such problem which will cause schedule switch failure.
Tracked-On: #2410
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
This is the following patch after removing pending_pre_work, it make sure
all io emulation is done on its own cpu.
For hv emulated request, it follows the steps:
hv_emulate_pio->emulate_pio_complete
hv_emulate_mmio->emulate_mmio_complete
For dm emulated request, it follows the steps:
acrn_insert_request->dm_emulate_io_complete
while in acrn_insert_request, it could trigger scheduling out then resume by
hcall_notify_ioreq_finish, or busy wait for ioreq completion if polling mode
is enabled.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Now we do not need pending_pre_work anymore, as we can make sure IO request
VCPU resume from where it paused.
Now only three fixed points will try to do schedule:
- vcpu_thread: before vm entry, will check reschedule flag and to it if needed
- default_idle: loop check reschedule flag to see if need switch out
- io request: if IO REQ need DM's handle, it will schedule out
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
this patch added full context switch support for scheduling, it make sure
each VCPU has its own stack, and added host_sp field in struct sched_object
to record host stack pointer for each switch out object.
Arch related function arch_switch_to is added for context switch.
To benefit debugging, a name[] field is also added into struct sched_object.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
To support full context switch scheduling, each physical
CPU must have its own idle sched_obj.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
We will use guest_flags of SECURE_WORLD_ENABLED to check wthether
sworld is supported.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch creates a new get_sos_vm() api to replace get_vm_from_vmid(0U)
because VM 0 might not be SOS VM now;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When pcpu enter guest mode, it will call launch_vms() function to launch
VMs in global vm_configs array.
In launch_vms() function, current pcpu will go through vm_config array list
and check whether it is a bsp of configured VM, if yes then it will prepare
corresponding VM and start it. The index of vm_config array will be specified
to VM id.
The first least significant bit in pcpu_bitmap means the bsp of the VM.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Under sharing mode, VM0 is identical with SOS VM. But the coupling of
SOS VM and VM 0 is not friendly for partition mode.
This patch is a pure term change of vm0 to sos VM, it does not change
any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to edge interrupt, like eth device, it can triger the interrupt again
when its IRQ in softirq entry queue or in timer list.
in current design, for sofrirq entry, it calls "list_del" before
"list_add_tail", to avoid the entry added twice.
so for interrupt delay timer, add to check if it is started
then just drop the next one; to avoid it enqueue twice.
Tracked-On: #2365
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
This patch is a pure term change of vm_description to vm_config,
the struct name of vm_description is changed to acrn_vm_config.
The patch does not change any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently the SOS kernel will call hcall_set_callback_vector to config
the expected up-notification vector(0xF3) and then hypervisor uses the
passed vector to raise the interrupt to SOS when needed.
As sos kernel already switches to 0xF3 notification vector, the default
notification vector can be changed from 0xF7 to 0xF3. In such case it still
can work well even when the SOS kernel doesn't reconfigure the notification
vector.
Tracked-On: projectacrn/acrn-hypervisor#2355
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
-- Change acrn_vhm_vector to static, only used in io_request.c
-- Add set_vhm_vector() api, it will call this api instead of
acrn_vhm_vector except io_request.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When we use script to analyze the latency between vm_exit and vm_entry,
it does not include the duration of vm_exit handler.
The patch moves the vm_exit trace before vmexit_handler.
v2: move vm_exit trace right after run_vcpu.
Tracked-On: #2341
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
IO completion polling will access vcpu and vm structs. If doing it in
idle thread, there might be some race issues between vm destroying and
idle thread. They are running on different cores.
Got suggestion from Fengwei, decouple the polling action from idle
thread and just do it in vcpu thread, then we can guarantee idle thread
in really idle status.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Now, need_reschedule will test_and_clear the bit NEED_RESCHEDULE in
schedule context, then call schedule. It is not a exact match with the
name.
This patch move the flag clearing into scheudle, and need_reschedule
just check and return.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix "Procedure has more than one exit point" by split the function into
two parts.
V1->V2:
compact the multiple lines into one.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the complicated violations by methods list below:
1.if ... else ... fmt.
2.add status in proper position.
example:
bool bdf_valid;(could find this variable in this patch).
V1->V2:
merge branches.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fix the violations by the "if ... else ..." fmt.
V1->V2:
merge branches.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the violations list below:
1.Procedure has more than one exit point.
2.Use of sizeof on an array parameter.
3.Expression needs brackets.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
use struct sched_object as the main interface of scheduling, then
make scheduler as an independent module to vcpu:
- add struct sched_object as one field in struct vcpu
- define sched_object.thread for switch_to thread
- define sched_object.prepare_switch_out/in for prepare_switch before
switch_to
- move context_switch_out/context_switch_in into vcpu.c as
vcpu.sched_obj.prepare_switch_out/in
- make default_idle as global idle.thread for idle_thread
- make vcpu_thread as vcpu.sched_obj.thread for each vcpu thread
- simplify switch_to based on sched_object
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
just use pcpu_id for make_reschedule_request is enough
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
add struct sched_object, and use it as input param instead of vcpu for
below functions:
- add_to_cpu_runqueue renamed from add_vcpu_to_runqueue
- remove_from_cpu_runqueue renamed from remove_vcpu_from_runqueue
- get_next_sched_obj added to get next sched object
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
Clean the io_request.c's violations reported by the misra tools.
V1->V2:
remove violations which checked with NULL.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixs MISRAC violations in common/ptdev.c and include/common/ptdev.h
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- fix MISRA-C violation "procedure has more than one exit point"
for this api
-- change start_vm to void type since it is always return 0
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Zide Chen