hv: pci: refine pci_lookup_drhd_for_pbdf with hash
1. Added an auxiliary function pci_find_pdev using hash to find pdev
with pbdf, thus pci_lookup_drhd_for_pbdf will have a better performance
Tracked-On: #4857
Signed-off-by: Wang Qian <qian1.wang@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: pci: rename pci_pdev_array to pci_pdevs to make it clearer
Tracked-On: #4857
Signed-off-by: Wang Qian <qian1.wang@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The hv parameter could be configured in GRUB menu, currently we support
"uart=" parameter to override uart settings.
The patch also has modifications on tutorial of using_grub.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As a UX improvement, use a separate tab when opening links to external
sites (use the same tab for internal links). Also, use rel=noopener
attribute to improve security when linking to external sites.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the "Run Kata Containers on a Service VM" tutorial to use ACRN v2.0. It
also uses Ubuntu 20.04 as the baseline instead of Ubuntu 18.04. The Kata
Containers installation method is different as there are no pre-built binaries
for Ubuntu 20.04 yet, so using the 'kata-deploy' approach instead which is more
generic.
Changed link to slideshare.net for the referenced TCM presentation.
Tracked-On: #4944
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the table summarizing all ACRN scenario that are defined. The SDC
also offers the opportunity to run a Kata Containers VM and that was missing
from the description.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
New option "vmsix_on_msi,<bar_id>" is added to specify the passthrough
device needs vMSI-X emulation based on MSI capability.
If vMSI-X on MSI emulation is needed, a virtual BAR will be allocated.
Also, fix a logic error on when to setup INTx.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Some passthrough devices require multiple MSI vectors, but don't
support MSI-X. In meanwhile, Linux kernel doesn't support continuous
vector allocation.
On native platform, this issue can be mitigated by IOMMU via interrupt
remapping. However, on ACRN, there is no vIOMMU.
vMSI-X on MSI emulation is one solution to mitigate this problem on ACRN.
This patch adds MSI-X emulation on MSI capability.
For the device needs to do MSI-X emulation, HV will hide MSI capability
and present MSI-X capability to guest.
The guest driver may need to modify to reqeust MSI-X vector.
For example:
ret = pci_alloc_irq_vectors(pdev, 1, STMMAC_MSI_VEC_MAX,
- PCI_IRQ_MSI);
+ PCI_IRQ_MSI | PCI_IRQ_MSIX);
To enable MSI-X emulation, the device should:
- 1. The device should be in vmsix_on_msi_devs array.
- 2. Support MSI, but don't support MSI-X.
- 3. MSI capability should support per-vector mask.
- 4. The device should have an unused BAR.
- 5. The device driver should not rely on PBA for functionality.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
dmar_reserve_irte is added to reserve N coutinuous IRTEs.
N could be 1, 2, 4, 8, 16, or 32.
The reserved IRTEs will not be freed.
Tracked-On:#4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For a ptirq_remapping_info entry, when build IRTE:
- If the caller provides a valid IRTE, use the IRET
- If the caller doesn't provide a valid IRTE, allocate a IRET when the
entry doesn't have a valid IRTE, in this case, the IRET will be freed
when free the entry.
Tracked-On:#4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
idx_in:
- If the caller of dmar_assign_irte passes a valid IRTE index, it will
be resued;
- If the caller of dmar_assign_irte passes INVALID_IRTE_ID as IRTE index,
the function will allocate a new IRTE.
idx_out:
This paramter return the actual index of IRTE used. The caller need to
check whether the return value is valid or not.
Also this patch adds an internal function alloc_irte.
The function takes count as input paramter to allocate continuous IRTEs.
The count can only be 1, 2, 4, 8, 16 or 32.
This is prepared for multiple MSI vector support.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Script only append 'U' for the config of int with a range.
Add a range to MAX_IR_ENTRIES.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
There are three TSN devices on EHL CRB, and each of them need 32
vectors.
In order to support TSN devices, increase msix table size and irte
size.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Improve usability of search results to promote tutorials and developer
guides, and demote API and KConfig material, with release notes at the
end.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
There're some platforms still doesn't support 1GB large page on CPU side.
Such as lakefield, TNT and EHL platforms on which have some silicon bug and
this case CPU don't support 1GB large page.
This patch tries to release this constrain to support more hardware platform.
Note this patch doesn't release the constrain on IOMMU side.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
This patch tries to release hardware platform 1GB large page support constrain
on CPU side.
There're some silicon bug on lakefield, TNT and EHL platforms which cause CPU
couldn't support 1GB large page. As a result, the pre-assumption The platform
which ACRN supports must support 1GB large page on both CPU side and VTD side
is not true any more.
This reverts commit f01aad7e to let trampoline execution use 2MB pages.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Update the "Getting Started Guide for ACRN Industry Scenario with Ubuntu Service
VM" document. Specifically:
* Fix some code sequences that were incorrect (wrong file names/paths, etc.)
* Broke down some long lines to improve readibility
* Add some text/notes at places to better explain the process
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Refresh and update the "What is ACRN" document to reflect the latest changes.
Most notably, the scenario definitions have changed.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Update the 'ivshmem' document to clarify the existence of two similar
mechanisms to expose this device to User VMs. One is implemented in the ACRN
Device Model and another (future) is implemented in the hypervisor.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The information needed to enable MSI-x emulation.
Only enable MSI-x emuation for the devices in msix_emul_devs array.
Currently, only EHL has the need to enable MSI-x emulation for TSN
devices.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
generate msix emulation information from known exist PCI devices for
board config.
Tracked-On: #4831
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The acrn_mbi.mi_mmap_va should point to struct multiboot2_mmap_entry when
boot from multiboot2, which is different from struct multiboot_mmap when
boot from multiboot1. So we should handle mmap info separately for multiboot2.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Fix broken download links to the Service VM and RTVM images that are provided
for ACRN release 1.6.1.
Tracked-On: #4918
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This commit adds the required dependencies for building the acrn-libvirt
from source. The missing packages were installed for building the ACRN
source code, it's no harm to `apt install` the packages if they are
already installed, but this commit make the build of acrn-libvirt
independently.
Tracked-On: #4910
Signed-off-by: Tonny Tzeng <tonny.tzeng@intel.com>
Previously the VM kernel bootargs for pre-launched VMs and direct boot mode
of SOS VM are built-in hypervisor binary so end users have no way to change
it. Now we provide another option that the multiboot module string could be
used as bootargs also. This would bring convenience to end users when they
use GRUB as bootloader because the bootargs could be configurable in GRUB
menu.
The usage is if there is any string follows configured kernel_mod_tag in
module string, the string will be used as new kernel bootargs instead of
built-in kernel bootargs. If there is no string follows kernel_mod_tag,
then the built-in bootargs will be the default kernel bootargs.
Please note kernel_mod_tag must be the first word in module string in any
case, it is used to specify the module for which VM.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Previously append_seed_arg() just do fill in seed arg to dest cmd buffer,
so rename the api name to fill_seed_arg().
Since fill_seed_arg() will be called in SOS VM path only, the param of
bool vm_is_sos is not needed and will be replaced by dest buffer size.
The seed_args[] which used by fill_seed_arg() is pre-defined as all-zero,
so memset() is not needed in fill_seed_arg(), buffer pointer check
and strncpy_s() are not needed also.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a standard string api strncat_s() to replace merge_cmdline() to make code
more readable.
Another change is that the multiboot cmdline will be appended to the end of
configured SOS bootargs instead of the beginning, this would enable a feature
that some kernel cmdline paramter items could be overriden by multiboot cmdline
since the later one would win if same parameters configured in kernel cmdline.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per C11 standard (ISO/IEC 9899:2011): K.3.7.1.4
1. Copying shall not take place between objects that overlap;
2. If there is a runtime-constraint violation, the strncpy_s function sets
s1[0] to '\0\;
3. The strncpy_s function returns zero if there was no runtime-constraint
violation. Otherwise, a nonzero value is returned.
4. The function is implemented with memcpy_s() because the runtime-constraint
detection is almost same.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per C11 standard (ISO/IEC 9899:2011): K.3.7.1.1
1. Copying shall not take place between objects that overlap;
2. If there is a runtime-constraint violation, the memcpy_s function stores
zeros in the first s1max characters of the object;
3. The memcpy_s function returns zero if there was no runtime-constraint
violation. Otherwise, a nonzero value is returned.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The multiboot2 cmdline would be used as hypervisor cmdline, add parse logic
for the case that hypervisor boot from multiboot2 protocol.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously sanitize_multiboot_info() was called after init_debug_pre() because
the debug message can only print after uart is initialized. On the other hand,
multiboot cmdline need to be parsed before init_debug_pre() because the cmdline
could override uart settings and make sure debug message printed successfully.
This cause multiboot info was parsed in two stages.
The patch revise the multiboot parse logic that split sanitize_multiboot_info()
api and use init_acrn_multiboot_info() api for the early stage. The most of
multiboot info will be initialized during this stage and no debug message need
to be printed. After uart is initialized, the sanitize_multiboot_info() would
do sanitize multiboot info and print needed debug messages.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
A previous error (now fixed) in how the rst-columns CSS was written,
caused the default rst-columns to use 3 columns, when before (because of
the error) it being ignored.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Qian Wang