With rare probability, the two threads may try to get&put client
together. For client getting, the subsequent thread will get one
destroyed client. For client putting, it will cause acrn-dm get crashed
due to assert be triggered in virtio_heci_client_put.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The original code assume there is only one configuration for
virtio-blk, and 'b' is just located after that configuration,
so to get the value of 'b', it will end char *config by adding
'\0' after the first configuration.
Thus, char *config will change from:
/XXXX_vdisk_file,range=xxx/xxx
to:
/XXXX_vdisk_file
and char *b will point to:
range=xxx/xxx
So, the range will never take effect for virtio-blk.
Now, 'b' is designed to located just after emul, and
char *config will point to all configurations after 'b'.
Note: only ",b," is taken for boot device option.
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All related resources are freed in virtio_input_deinit.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The implementation of virtio_input_get_config is based on ioctl of
evdev fd. The following properties of input device are got by ioctl
to service configuation request from FE driver:
- name and devids
- propbit
- evbit: keybit/relbit/absbit/mscbit/swbit
- absbit
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Input events are read from host evdev fd and cached into a local queue.
When SYN_REPORT is read, the cached input events are sent to guest via
EVENT virtqueue. Guest input events are read from STATUS virtqueue then
written to host evdev fd.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the callbacks required by virtio_input_ops:
reset/cfgread/cfgwrite/apply_features/set_status.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The following are done in virtio_input_init:
- parse the command line to get the path of host evdev
- parse the command line to get the optional serial string
- calloc struct virtio_input and initialize it
- call virtio framework APIs to initialize virtio PCI
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the data structures and macros used to implement
virtio-input.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With this patch, UOS would be capable of guest Cx controling.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The function would write CST objects which needed to enable Cx control
to UOS DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
DM will use these functions to get cx entry cnt and cx data then inject
_CST objects to UOS DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Move all virtual devices init/deinit to function to simplify the
failure path of main loop. In the future, new virtual device will
not touch main loop.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- make ioc_init/ioc_deinit take struct vmctx as argument
- ioc_init return int instead of pointer to struct ioc_dev
- add ioc_dev in vmctx to track ioc_dev
- remove the atkbdc.h included in vmmapi.h
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Liu, Yuan1 <yuan1.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- Move the variable local_time from main.c to rtc.c
- Change vrtc_init to return int instead of pointer to vrtc. We do
track vrtc in struct vmctx.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Print an error message and exit rather than using assert, so it is
more obvious what the problem is and no core files are produced.
Fixes#61
Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Following functions have never been used anywhere.
Let's remove them.
fbsdrun_muxed()
fbsdrun_vmexit_on_hlt()
fbsdrun_vmexit_on_pause()
fbsdrun_disable_x2apic()
Remove weird prefix "fbsdrun" from following functions' name.
fbsdrun_virtio_msix() --> virtio_uses_msix()
fbsdrun_start_thread() --> start_thread()
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove weird prefix "fbsdrun" from the function name.
Since "fbsdrun_addcpu" has never been called by external
functions, Let's remove its declaration from "dm.h" and
make it as a static function to keep consistency with
"fbsdrun_deletecpu".
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The launch script can output log messages, that should be text.
But it is not always true. E.g. "launch_UOS.sh -U 2" echo message
contain '\0', The 'grep' command will show "Binary file (xxxxxx)
matches", thus acrnctl can't get the vmname. We can use 'grep -a'
instead.
Acked-by: Xu Anthony <anthony.xu@intel.com>
Reviewed-by: Yan Like <like.yan@intel.com>
Reported-by: Chen ChengX <chengx.chen@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
If guest doesn't initialize the net device, the tx thread will
block at the first tx_cond wait. When virtio_net_tx_stop is
invoked, the tx_thread will block on second tx_cond then.
Check whether we should exit tx_thread after first tx_cond
waiting
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add AmbientTemperature signal into the whitelist,
instead of TemperatureSensorEnvironment signal.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove some useless signals from the whitelist and add new three signals into
the whitelist based on requirement.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
adding API vm_map_memseg_vma() which using ioctl IC_SET_MEMSEG call
into VHM for futher mem(ept) mapping, based on user vma information.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Type '-T' in DM cmdline to enable hugetlb memory allocation.
It enabled 2 level of huge page:
Level 1: size 2M, path: /run/hugepage/acrn/huge_lv1/guid
Level 2: size 1G, path: /run/hugepage/acrn/huge_lv2/guid
NOTE:
before running, please make sure system already have enough hugepages
reserved under:
/sys/kernel/mm/hugepages/hugepages-xxxxkB/nr_hugepages
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
to avoid system resource/memory leaked when guest os reboot.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If multiple ports are defined in the command line, is_console is
not set to a correct value for non-console ports when the definition
of this non-console port is following the definition of a console port.
For example in below definition, the second port is configured as
console port which is not correct:
-s 5,virtio-console,@pty:pty_port,file:file_port=/home/root/test1
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Two memory ranges are allocated:
- PCI ECFG
- PCI hole
They should be released when deinit_pci. Old code mark
this two ranges not unregistered. Which is wrong for
warm reboot case. Make them could be unregistered.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When doing warm reboot, the mevent module will not be deinitialized.
We need to delete all mevent registered while deinit virutal device.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Also refine the failure path of lpc_init to make sure all
resources allocated get release.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add deinit function for uart.
Another work is add resource cleanup functions which is called
by other components when they are using uart.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Move the bvmcons enable flag from main.c to consport.c.
So we don't need the flag in main.c for bvmcons.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add "-i" in the DM boot command line for booting IOC mediator.
NOTE: currently only ioc_init will be called in the main entry, ioc_deinit
hasn't be called so far. The DM plans to add one virtual devices list inside
of struct vmctx in the near furture, and virtual devices data structure will
add one common deinit callbacks which will be called during VM exits.
Will support ioc_deinit once that patch merged.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add three PTY devices as dummy native channels. They are used for emulating
native lifecycle channel, native signal channel and native OEM raw channel
for IOC debugging.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is used for IOC mediator debugging. Due to IOC message logs are
too much, need to save into one file instead of output stdout directly.
By default, the debug log is disabled.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the signal whitelist feature.
All the signal messages will be discarded if they are not existed in whitelist.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the IOC CBC signal serivces including single signal,
multi-signal and group signal. All of them are used for CAN devices
communication and IOC on-board peripherals control.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the IOC lifecycle virtualization.
In native environment, lifecycle is uesed for SoC system power control,
likes enter/exit S3/S5. So these related messages can not forward directly
between physical IOC and Guest OS, they need to be mapped to VM pause, exit
and launch.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the IOC signal identities and signal group identities,
that will be used by subsequent signal support patches.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Carrier Board Communication(CBC) protocol is a duplex protocol for IOC data
transfer, including physical layer, link layer, address layer and service layer.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IOC mediator communicates with native IOC HW through several native channels of
CBC protocol. And IOC mediator communicates with virtual UART through one virtual
channel.
This patch implements channel operations including open/close/read/write.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IOC mediator main functionality is transfer data between native CBC char
devices and virtual UART, it is implemented as full virtualization, Guest
OS can reuse native CBC driver directly.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add Automotive IOC mediator data structure definitions.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Unlike kqueue/kevent of BSD, the epoll of Linux could be
add/del by using different API on the fly.
This patch drops the notify used by mevent_add/del and
call epoll_ctl to add/delete target fd. Only keeps
global_head to track mevent added and makes the code
logic in mevent_dispatch() a littel bit simpler.
Another thing is related with epoll_ctl. If the target
fd is regular fd which doesn't support epoll, epoll_ctl
will return -1. When DM is start by systemd, the STDIO
is not mapped to terminal, epoll_ctl on STDIO could
return -1. Which block UOS boot. We only call mevent_add
after confirm STDIO is mapped to terminal.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Current, mevent cleanup path has issue. There are possible
following calling sequence happen when reboot/poweroff UOS:
1. mevent_dispatch() calls mevent_destroy
2. do_close_post calls some virtual device deinit to delete
mevent.
This patch introduce mevent init/deinit to make sure:
1. mevent init
2. mevent_add is called when init virtual device
3. mevent_del is called when deinit virtual device
4. mevent deinit
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For vSBL boot path, we need to mark the memory vSBL is using
as reserved in e820 table. The add_e820_entry is added to
update the e820 table dynamically.
To simplify the code logic, we assume:
- vSBL is put the middle of one entry of default e820 table
- That entry has orignal RAM type in e820 table
- The e820 table has enough space to hold two more new entries.
If there is more complicated case in the future, we could extend
add_e820_entry to handle it.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The region of MPtable/ACPI table/SMBios resides in
0xF0000 ~ 0x100000. They should be marked as RESERVED instead of
RAM type in e820 table.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Devices' de-init process might access some mapped memory space, such as
virtio virtqueues. Access after unmap will cause a fault.
Release the memory map after de-init processes can avoid it. Reading
more code, there are many error handling lost to unmap the memory.
Refined the code to do it.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are two build issues:
- add -fno-strict-aliasing to address
error: dereferencing type-punned pointer will break strict-aliasing rules
- initialize tfd to zero to address
error: ‘tfd’ may be used uninitialized in this function
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
This reverts commit bc0579d0ff.
The commit bc0579d makes acrn-dm crashed when launch UOS.
Crash log:
./launch_UOS.sh: line 112: 377 Segmentation fault (core dumped) acrn-dm ...
dmesg log:
acrn-dm[1264]: segfault at 1f0 ip 0000000000412257 sp 00007fffc1af9920 error 6 in acrn-dm[400000+3d000]
After this patch reverted, UOS launched successfully.
Firmware need to disconnect the client connection when host's message
overlow the receive buffer in firmware. We emulate this behavior in
backend service.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we treat a read/write ENODEV error as a firmware reset. When MEI
reset happens in driver, we need disconnect all active clients and
restart HBM flow.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
HECI Bus Message is important for HECI clients communication. They use
HBM for connect, disconnect, get property and so on. In backend service,
we need do some emulation for HBM as we are running on top of native
MEI driver.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Backend service access the native HECI driver through MEI driver
interface in service OS. Some MEI clients need to be multiplexed,
the backend service will engage necessary service at clients filter.
TX thread is for passing data from guest to host MEI driver, then to
native hardware. RX thread is for passing data from native hardware to
guest.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ME client mapping is for tracking ME clients operations between frontend
driver and backend service. It contains buffers for send/recv packing
and forwarding.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implement HECI virtualization backend service based on virtio
userspace framework. This service introduce a virtio-heci device model
for DM, and can be enabled by DM parameter '-s [BUS NO],virtio-heci'.
The HECI virtualization need both backend service in device-model and
frontend driver in guest to work. Backend service mainly emulates HECI
device's behaviors to satisfy frontend driver. They are based on virtio
userspace framework. Currently, it is using two virtqueues, one is for
TX and another is for RX.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The 'find' command was not installed in our minimal Fedora 26
and 27-based Docker images. This resulted in a non-fatal error
when performing a 'make clean'. This commit adds this utility
(available in the 'findutils' package).
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
A couple of problems appeared on Ubuntu 14.04 (gcc 4.8.4) when we
turned on additional compiler flags with commit
519c4285cf104a594776591075ee1c6ee4d61815a. This patch fixes these
problems by adhering to the strict anti-aliasing rules and also
initializing the 'tfd' variable where the compile believed it
_could_ be used uninitialized.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
sync acrn_common.h to device model
set secure world enabled flag
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
malloc: allocate a block of memory, the contents of the block are undefined.
calloc: allocate a block of memory for an array of num elements and initializes all its bits to zero.
Signed-off-by: yechunliang <yechunliangcn@163.com>
for (int i = 0; i < ...; i++) is only allowed in C99 mode, so fix this
coding style to:
int i;
for (i = 0; i < ...; i++)
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With the DSDT which include virtual _PSS/_PCT/_PPC objects, UOS should
have ACPI Px control capability if acpi cpufreq driver is enalbed in
kernel.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Some ACPI objects is per-vm and per-cpu specific so we need to pass
vmctx as function parameter when we write objects into DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
There are 3 ACPI objects for Px: _PCT, _PPC and _PSS need to be writed
to DSDT, and the _PSS data is per-cpu specific so we need to pass the
vm id and vcpu id as parameter.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The px count and data is per-cpu so we should query them for specific
vm and specific vcpu, for px data we need to specify px num also.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The interface will be used to interact with VHM service via IOCTL.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The acrnctl can help user to create, delete, launch and stop UOSs,
To see what it can do, just run:
# acrnctl
or
# acrnctl help
you may see:
support:
list
start
stop
del
add
Use acrnctl [cmd] help for details
There are examples:
(1) add a VM
Each time you can just add one VM. Suppose you have an UOS
launch script, such as launch_UOS.sh
you can run:
# acrnctl add launch_UOS.sh -U 1
vm1-14:59:30 added
Note that, launch script shoud be able to launch ONE UOS. If
it fail, it is better to print some error logs, to tell user
the reason, so that he knows how to solve it.
The vmname is important, the acrnctl searchs VMs by their
names. so duplicated VM names are not allowed. Beside, if the
launch script changes VM name at launch time, acrnctl will
not recgonize it.
(2) delete VMs
# acrnctl del vm1-14:59:30
(3) show VMs
# acrnctl list
vm1-14:59:30 untracked
vm-yocto stop
vm-android stop
(4) start VM
you can start a vm with 'stop' status, each time can start
one VM.
# acrnctl start vm-yocto
(5) stop VM
you can stop VMs, if their status is not 'stop'
# acrnctl stop vm-yocto vm1-14:59:30 vm-android
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Signed-off-by: Tao, Yuhong <yuhong.tao@intel.com>
A monitor component will be added to acrn-dm, which crteats socket,
bind and listening at /run/acrn/vmname. Acrnctl & acrnd could conn
-ect to the socket for communication, using defined message, in
include/monitor_msg.h
For each defined message, a message handler callback could be
registered via monitor_add_msg_handler(). On received of a defined
message, a certain call back will be called. Each callback can only
see the message sender's socket-fd.
When acrn-dm want report something, not triggered by incoming message
it can send broadcast message, use monitor_broadcast().
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin, Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao, Yuhong <yuhong.tao@intel.com>
Enable Travis CI testing for the following development host OSs:
* Clearlinux
* Ubuntu 16.04
* Fedora 26
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The patch includes:
1. vrtc_cleanup -> vrtc_deinit to align with other devices
2. delete timer created in vrtc_init
3. make call to vrtc_deinit in cleanup path
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
old code has no deinit functionality for virtual keyboard device.
Which will trigger resource leak when system is reboot.
deinit function is added to:
1. deinit low ps2 based keyboard and mouse
2. release memory/io resource of virtual keyboard device
NOTE: IRQ resource will be handed in pci irq module
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Add deinit function for ps2kbd and ps2mouse.
To support deinit function for ps2kbd and ps2mouse which
has struct atkbdc_base as parameter, we make struct
atkbdc_base exported as public.
We also add console unregister function for keyboard
and mouse. Which are called in ps2mouse/ps2kbd deinit
function.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
We didn't release mmio/io data structure related with PCI bar
of pci dev. Which could trigger memory leak when reboot UOS.
With the new patch, we release the mmio/io data structure
when pci core tries to deinit pci device.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Virtio 1.0 introdues a generation number for the device-specific
configuration. It should be increased every time the configuration
noticeably changes.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When the device has experienced an error from which it cannot
re-cover, DEVICE_NEEDS_RESET is set to the device status register
and a config change intr is sent to the guest driver.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Virtio modern changed the virtqueue cofiguration precedures. GPA
of descriptor table, available ring and used ring are written to
common configuration registers separately. A final write to
Q_ENABLE register triggered initialization of the virtqueue on
the backend device.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
virtio_notify_cfg_write is called when guest driver performs virtqueue
kick by writing the notificaiton register of the virtqueue.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Registers in the isr configuration region are read-only.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the read/write callbacks for the registers in the
device-specific region. This region is implemented in the modern MMIO
bar.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the read/write callbacks for the registers in the
common configuration region. This region is implemented in the modern
MMIO bar.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the generic PCI barread/barwrite callbacks.
Specific barread/barwrite interfaces are called based on the baridx.
Virtio legacy devices, transitional devices and modern devices can
be handled in an unified way.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
virtio_set_modern_bar is an external interface that backend virtio
driver can call to initialize the PCI capabilities and PCI bars
defined in the virtio 1.0 spec.
The following are done in the function:
- 5 PCI capabilities are added to the PCI configuration space of the
virtio PCI device. (common/isr/device_specific/notify/cfg_access)
- A 64-bit MMIO bar is allocated to accommodate the registers defined
in the 4 PCI capabilities. (cfg_access capability does not require
MMIO.)
- If use_notify_pio is true, a PIO notify capability is added to the
PCI configuration space and a PIO bar is allocated for it
accordingly.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Struct virtio_base and struct virtio_vq_info are expanded to support
virtio 1.0 framework. The BAR layouts of virtio legacy/transitional/
modern are introduced as well.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds virtio 1.0 data structures and macros according to
virtio spec v1.0 cs4. Part of them are referenced from Linux's
BSD-licensed include/uapi/linux/virtio_pci.h
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pci_emul_add_capability is needed by virtio 1.0 framework to add
pci vendor capability from outside of pci core.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The trusty enabled or not will be passed to HV
with create vm hypercall. It's passed to vSBL within
config page also.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
acrnlog should run automatically at boot.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
acrnlog is an SOS userland tool to capture ACRN hypervisor log
to /tmp/acrnog/. Two kinds of logs would be saved:
- log of current running;
- log of last running if crashed and logs remaining.
[Usage] acrnlog [-s] [size] [-n] [number]
[Options]
-h: print this message
-s: size limitation for each log file, in MB.
0 means no limitation.
-n: how many files you would like to keep on disk
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Script usage:
[Usage] acrnalyze.py [options] [value] ...
[options]
-h: print this message
-i, --ifile=[string]: input file
-o, --ofile=[string]: output file
--vm_exit: to generate vm_exit report
Note: bash and python2 are required.
Example:
Assumed trace data have been copied to /home/xxxx/trace_data/20171115-101605
# acrnalyze.py -i /home/xxxx/trace_data/20171115-101605/0 -o /home/xxxx/trac
e_data/20171115-101605/cpu0 --vm_exit
- "--vm_exit" specify the analysis to do, currently, only vm_exit analysis
is supported.
- A preprocess would be taken out to make the trace data start and end with
an VM_ENTER, and a copy of original data file is saved with suffix ".orig";
- Analysis report would be given on the std output and in a csv file with
name specified via "-o outpu_file";
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
acrntrace: is an debug tool running on SOS to capture trace data.
Usage:
1) Start tracing
Capture buffered trace data:
# acrntrace
or clear buffer before tracing start:
# acrntrace -c
A folder will be created to save the trace data files are under
/tmp/acrntrace/, named with time string.
Eg: /tmp/acrntrace/20171115-101605
2) Stop tracing
# q <enter>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we could use option:
-s 3,virtio-blk,/XXXX_vdisk_file,b
to show this virtio device is boot device for guest.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Some guests needs guest partition info passed to support
A/B boot. DM needs to load guest partition info from file
and pass to vsbl.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are two things here:
1. Enable basic vsbl boot functionality.
2. add long option to DM to specific vsbl file. So DM could
choice to boot guest with vsbl.
It's hard to find a suitable short option. So only long option
is supported for vsbl file name option.
If long option "--vsbl='vsbl_file_name'" is given in DM
commandline, the "vsbl_file_name" will be loaded by DM
first and running. vsbl will be response to lead guest to
next boot stage.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Will update e820 table to mark the address ACPI specific type.
Also need pass ACPI table start address and size to vsbl.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
To align with file name, acrn_sw_load_direct() is changed
to acrn_sw_load_bzimage().
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
gcc8 showed following errors when build DM:
error: argument to ‘sizeof’ in ‘strncpy’ call is the same
expression as the source; did you mean to use the size of the
destination? [-Werror=sizeof-pointer-memaccess]
It looks like wrong parameter was given to strncpy.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The common loader code is put to sw_load_common.c
The loader code for directly kernel loading is put to sw_load_bzimage.c
The further change for SBL will be put to sw_load_sbl.c
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
New compiler options introduced by commit
519c4285cf will cause DM compile failure
which caused by warnings from some snprintf usage might be truncated.
Expanding the string buffer to make compiler happy.
v3: change format string
v2: Address comment from Hao, shrink bident string size to satify
tname length in blockif_open.
Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Some virtio PCI devices can change the device configuration state, as
reflected in the device-specific configuration region of the device. In
this case:
* If MSI-X capability is disabled:
1. Set the second lower bit of the ISR Status field for the device
2. Send the appropriate PCI interrupt for the device.
* If MSI-X capability is enabled:
1. If config_msix_vector is not NO_VECTOR, request the appropriate
MSI-X interrupt message for the device, config_msix_vector sets
the MSI-X Table entry number.
A single interrupt MAY indicate both that one or more virtqueue has been
used and that the configuration space has changed.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
IPU devices are using I2C device with physical BDF 0:16.0.
The I2C controller has the dependency on ACPI info.
This patch is to add ACPI info for the I2C controller and the two IPU
devices that are under the scope of I2C.
Note:
This patch is specific for GP platform.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Linux kernel CF9 reboot is doing things like:
- read value from 0xcf9
- mask out the value according to the reboot type (warm vs cold)
- BIT OR the value with reboot code
- write the value to 0xcf9
If there are two reboot event and the first one is cold
reboot and the second one is warm reboot, vsbl query
reboot type after the second one and will get code reboot
instead of warm reboot.
We should clear the data of 0xcf9 if guest request cold reboot.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
There are bootloaders require cold reboot as ACPI reboot
instead of warm reboot.
So we set 0xE to reset value of FADT to make ACPI reboot
cold reboot.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
RELRO rearranges the data sections inside an ELF
executable. It also marks certain areas as 'read-only'
so that these data structures cannot be overwritten while
the process is running.
Tracked-On: 224003
Signed-off-by: wenshelx <wenshengx.wang@intel.com>
Enable stack-proctector-strong option for gcc emiting
extra code to check buffer overflow.
Enable noexecstack option for marking the object as not
requiring executable stack.
Tracked-On: 224003
Signed-off-by: wenshelx <wenshengx.wang@intel.com>
Writing PCIR_BIOS is to get PCI ROM resource length. Ingore the request
as it's not support currently. Else, guest might get wrong information
about the PCI ROM resource.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
* Convert the README file to reStructuredText (ReST)
* Add more details (such as build dependencies) for Fedora 27
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The demos scripts are not installed when "make install" is invoked.
This patch adds a rule to copy them to /usr/share/acrn
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Long Liu