will follow this convention for spin lock initialization:
-- for simple global variable locks, use this style:
static spinlock_t xxx_spinlock = {.head = 0U, .tail = 0U,}
-- for the locks inside a data structure, need to call
spinlock_init to initialize.
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
hv: hypercall: restrict the condition to assign/deassign a pci device to
a post-launched VM for safety
For the safety of post-launched VMs, pci devices assignments should
occur only when VM is being created (at VM_CREATED STATUS), and pci
devices de-assignment should occur only when VM is being created or
shutdown/reset (at VM_CREATED or VM_PAUSED status)
Tracked-On: #4995
Acked-by: Eddie Done <eddie.dong@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Signed-off-by: Wang Qian <qian1.wang@intel.com>
For a ptirq_remapping_info entry, when build IRTE:
- If the caller provides a valid IRTE, use the IRET
- If the caller doesn't provide a valid IRTE, allocate a IRET when the
entry doesn't have a valid IRTE, in this case, the IRET will be freed
when free the entry.
Tracked-On:#4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The mask valuei 0x3F was added to prevent out of range in array access.
However, it should not be hardcoded.
Since in ptirq_alloc_entry_id, the valid allocated id is no greater
than CONFIG_MAX_PT_IRQ_ENTRIES, it will not cause out of range array
access without mask.
So this patch removes the mask.
Also, use bitmap_clear_lock instead of bitmap_clear_nolock becuase there
could be the chance that more than 1 core to access a same 64bit var.
Tracked-On: #4828
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Refine find_ptirq_entry by hashing instead of walk each of the PTIRQ entries one by one.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
For post-launched VMs, the configured CPU affinity could be different
from the actual running CPU affinity. This new field acrn_vm->cpu_affinity
recognizes this difference so that it's possible that CREATE_VM
hypercall won't overwrite the configured CPU afifnity.
Change name cpu_affinity_bitmap in acrn_vm_config to cpu_affinity.
This is read-only in run time, never overwritten by acrn-dm.
Remove vm_config->vcpu_num, which means the number of vCPUs of the
configured CPU affinity. This is not to be confused with the actual
running vCPU number: vm->hw.created_vcpus.
Changed get_vm_bsp_pcpu_id() to get_configured_bsp_pcpu_id() for less
confusion.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For return value of local_gpa2hpa, either INVALID_HPA or NULL
means the EPT walking failure. Current code only take care of
NULL return and leave INVALID_HPA as correct case.
In some cases (if guest page table is filled with invalid memory
address), it could crash ACRN from guest.
Add INVALID_HPA return check as well.
Also add @pre assumptions for some gpa2hpa usages.
Tracked-On: #4730
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
- add a new member cpu_affinity to struct acrn_create_vm, so that acrn-dm
is able to assign CPU affinity through HC_CREATE_VM hypercall.
- if vm_create.cpu_affinity is zero, hypervisor launches the VM with the
statically configured CPU affinity.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
check the vm state in hypercall api,
add pre-condition for vm api.
Tracked-On: #4320
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Hypervisor reports VM configuration information to SOS which can be used to
dynamically allocate VCPU affinity.
Servise OS can get the vm_configs in this order:
1. call platform_info HC (set vm_configs_addr with 0) to get max_vms and
vm_config_entry_size.
2. allocate memory for acrn_vm_config array based on the number of VMs
and entry size that just got in step 1.
3. call platform_info HC again to collect VM configurations.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This function casts a member of a structure out to the containing structure.
So rename to container_of is more readable.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
- since now we don't need to print error messages if copy_to/from_gpa()
fails, then in many cases we can simplify the function return handling.
In the following example, my fix could change the 'ret' value from
the original '-1' to the actual errno returned from copy_to_gpa(). But
this is valid. Ideally we may replace all '-1' with the actual errno.
- if (copy_to_gpa() < 0) {
- pr_err("error messages");
- ret = -1;
- } else {
- ret = 0;
- }
+ ret = copy_to_gpa();
- in most cases, 'ret' is declared with a default value 0 or -1, then the
redundant assignment statements can be removed.
- replace white spaces with tabs.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
For SOS VM, when the target platform has multiple IO-APICs, there
should be equal number of virtual IO-APICs.
This patch adds support for emulating multiple vIOAPICs per VM.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
MADT is used to specify the GSI base for each IO-APIC and the number of
interrupt pins per IO-APIC is programmed into Max. Redir. Entry register of
that IO-APIC.
On platforms with multiple IO-APICs, there can be holes in the GSI space.
For example, on a platform with 2 IO-APICs, the following configuration has
a hole (from 24 to 31) in the GSI space.
IO-APIC 1: GSI base - 0, number of pins - 24
IO-APIC 2: GSI base - 32, number of pins - 8
This patch also adjusts the size for variables used to represent the total
number of IO-APICs on the system from uint16_t to uint8_t as the ACPI MADT
uses only 8-bits to indicate the unique IO-APIC IDs.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Initialize efi info of acrn mbi when boot from multiboot2 protocol, with
this patch hypervisor could get host efi info and pass it to Linux zeropage,
then make guest Linux possible to boot with efi environment;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Count down number will be decreased at each tick, when it comes to zero,
it will trigger reschedule.
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pick_next function will update the virtual time parameters, and return
the vcpu thread with earlest evt. Calculate the count down number for
the picked vcpu thread, it means how many mcu a thread can run before
the next reschedule occur.
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the wakeup handler, the vcpu_thread object will be inserted into the
runqueue, and in the sleep handler, it will be removed from the queue.
vcpu_thread object is ordered by EVT (effective virtual time).
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add init function for bvt scheduler, creating a runqueue and a period
timer, the timer interval is default as 1ms. The interval is the minimum
charging unit.
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
BVT (Borrowed virtual time) scheduler is used to schedule vCPUs on pCPU.
It has the concept of virtual time, vCPU with earliset virtual time is
dispatched first.
Main concepts:
tick timer:
a period tick is used to measure the physcial time in units of MCU
(minimum charing unit).
runqueue:
thread in the runqueue is ordered by virtual time.
weight:
each thread receives a share of the pCPU in proportion to its
weight.
context switch allowance:
the physcial time by which the current thread is allowed to advance
beyond the next runnable thread.
warp:
a thread with warp enabled will have a change to minus a value (Wi)
from virtual time to achieve higher priority.
virtual time:
AVT: actual virtual time, advance in proportional to weight.
EVT: effective virtual time.
EVT <- AVT - ( warp ? Wi : 0 )
SVT: scheduler virtual time, the minimum AVT in the runqueue.
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. Rename BOOT_CPU_ID to BSP_CPU_ID
2. Repace hardcoded value with BSP_CPU_ID when
ID of BSP is referenced.
Tracked-On: #4420
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add assign/deassign PCI device hypercall APIs to assign a PCI device from SOS to
post-launched VM or deassign a PCI device from post-launched VM to SOS. This patch
is prepared for spliting passthrough PCI device from DM to HV.
The old assign/deassign ptdev APIs will be discarded.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
On UEFI UP2 board, APs might execute HLT before SOS kernel INIT them.
After SOS kernel take over and will re-init the APs directly. The flows
from HV perspective is like:
HLT trap:
wait_event(VCPU_EVENT_VIRTUAL_INTERRUPT) -> sleep_thread
SOS kernel INIT, SIPI APs:
pause_vcpu(ZOMBIE) -> sleep_thread
-> reset_vcpu
-> launch_vcpu -> wake_vcpu
However, the last wake_vcpu will fail because the cpu event
VCPU_EVENT_VIRTUAL_INTERRUPT had not got signaled.
This patch will reset all vcpu events in reset_vcpu. If the thread was
previously waiting for a event, its waiting status will be cleared and
launch_vcpu will wake it to running.
Tracked-On: #4402
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. Align the coding style for these MACROs
2. Align the values of fixed VECTORs
Tracked-On: #4348
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
is_polling_ioreq is more straightforward. Rename it.
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'param' is BDF value instead of GPA when VHM driver
issues below 2 hypercalls:
- HC_ASSIGN_PTEDEV
- HC_DEASSIGN_PTDEV
This patch is to remove related code in hc_assign/deassign()
functions.
Tracked-On: #4334
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
HLT emulation is import to CPU resource maximum utilization. vcpu
doing HLT means it is idle and can give up CPU proactively. Thus, we
pause the vcpu thread in HLT emulation and resume it while event happens.
When vcpu enter HLT, its vcpu thread will sleep, but the vcpu state is
still 'Running'.
VM ID PCPU ID VCPU ID VCPU ROLE VCPU STATE
===== ======= ======= ========= ==========
0 0 0 PRIMARY Running
0 1 1 SECONDARY Running
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Introduce two kinds of events for each vcpu,
VCPU_EVENT_IOREQ: for vcpu waiting for IO request completion
VCPU_EVENT_VIRTUAL_INTERRUPT: for vcpu waiting for virtual interrupts events
vcpu can wait for such events, and resume to run when the
event get signalled.
This patch also change IO request waiting/notifying to this way.
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This simple event implemention can only support exclusive waiting
at same time. It mainly used by thread who want to wait for special event
happens.
Thread A who want to wait for some events calls
wait_event(struct sched_event *);
Thread B who can give the event signal calls
signal_event(struct sched_event *);
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Before we assign a PT device to post-launched VM, we should reset the PCI device
first. However, ACRN hypervisor doesn't plan to support PCIe hot-plug and doesn't
support PCIe bridge Secondary Bus Reset. So the PT device must support FLR or PM
reset. This patch do this check when assigning a PT device to post-launched VM.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
The patch abstract a vcpu_reset_internal() api for internal usage, the
function would not touch any vcpu state transition and just do vcpu reset
processing. It will be called by create_vcpu() and reset_vcpu().
The reset_vcpu() will act as a public api and should be called
only when vcpu receive INIT or vm reset/resume from S3. It should not be
called when do shutdown_vm() or hcall_sos_offline_cpu(), so the patch remove
reset_vcpu() in shutdown_vm() and hcall_sos_offline_cpu().
The patch also introduced reset_mode enum so that vcpu and vlapic could do
different context operation according to different reset mode;
Tracked-On: #4267
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We don't use INIT signal notification method now. This patch
removes them.
Tracked-On: #3886
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
We have implemented a new notification method using NMI.
So replace the INIT notification method with the NMI one.
Then we can remove INIT notification related code later.
Tracked-On: #3886
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
ACRN hypervisor needs to kick vCPU off VMX non-root mode to do some
operations in hypervisor, such as interrupt/exception injection, EPT
flush etc. For non lapic-pt vCPUs, we can use IPI to do so. But, it
doesn't work for lapic-pt vCPUs as the IPI will be injected to VMs
directly without vmexit.
Without the way to kick the vCPU off VMX non-root mode to handle pending
request on time, there may be fatal errors triggered.
1). Certain operation may not be carried out on time which may further
lead to fatal errors. Taking the EPT flush request as an example, once we
don't flush the EPT on time and the guest access the out-of-date EPT,
fatal error happens.
2). ACRN now will send an IPI with vector 0xF0 to target vCPU to kick the vCPU
off VMX non-root mode if it wants to do some operations on target vCPU.
However, this way doesn't work for lapic-pt vCPUs. The IPI will be delivered
to the guest directly without vmexit and the guest will receive a unexpected
interrupt. Consequently, if the guest can't handle this interrupt properly,
fatal error may happen.
The NMI can be used as the notification signal to kick the vCPU off VMX
non-root mode for lapic-pt vCPUs. So, this patch uses NMI as notification signal
to address the above issues for lapic-pt vCPUs.
Tracked-On: #3886
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Input 'vcpu_id' and the state of target vCPU should be validated
properly:
- 'vcpu_id' shall be less than 'vm->hw.created_vcpus' instead
of 'MAX_VCPUS_PER_VM'.
- The state of target vCPU should be "VCPU_PAUSED", and reject
all other states.
Tracked-On: #4245
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes potential hypervisor crash when
calling hcall_write_protect_page() with a crafted
GPA in 'struct wp_data' instance, e.g. an invalid
GPA that is not in the scope of the target VM's
EPT address space.
To check the validity for this GPA before updating
the 'write protect' page.
Tracked-On: #4240
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
In current architecutre, the maximum vCPUs number per VM could not
exceed the pCPUs number. Given the MAX_PCPU_NUM macro is provided
in board configurations, so remove the MAX_VCPUS_PER_VM from Kconfig
and add a macro of MAX_VCPUS_PER_VM to reference MAX_PCPU_NUM directly.
Tracked-On: #4230
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For now, we set NOOP scheduler as default. User can choose IORR scheduler as needed.
Tracked-On: #4178
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add yield support for schedule, which can give up pcpu proactively.
Tracked-On: #4178
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Implement .sleep/.wake/.pick_next of sched_iorr.
In .pick_next, we count current object's timeslice and pick the next
avaiable one. The policy is
1) get the first item in runqueue firstly
2) if object picked has no time_cycles, replenish it pick this one
3) At least take one idle sched object if we have no runnable object
after step 1) and 2)
In .wake, we start the tick if we have more than one active
thread_object in runqueue. In .sleep, stop the tick timer if necessary.
Tracked-On: #4178
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
sched_control is per-pcpu, each sched_control has a tick timer running
periodically. Every period called a tick. In tick handler, we do
1) compute left timeslice of current thread_object if it's not the idle
2) make a schedule request if current thread_object run out of timeslice
For runqueue maintaining, we will keep objects which has timeslice in
the front of runqueue and the ones get new replenished in tail.
Tracked-On: #4178
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Mingqiang Chi