Change launch_uos.sh to enable USB xHCI full emulation support.
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Binbin Wu<binbin.wu@intel.com>
The guc boot option is refined on the new linux kernel. The boot option of
"i915.enable_guc=0" should be added in order to disable Guc instead of using
"enable_guc_loading/submission". But in order to use the same boot option on
multi kernel, both of them are kept.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Binbin Wu<binbin.wu@intel.com>
The guc boot option is refined on the new linux kernel. The boot option of
"i915.enable_guc=0" should be added in order to disable Guc instead of using
"enable_guc_loading/submission". But in order to use the same boot option on
multi kernel, both of them are kept.
V1->V2: Add the option on APL-NUC platform
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Binbin Wu<binbin.wu@intel.com>
remove 2M hugepages setting here because it will not use any more.
# make sure there is enough 2M hugepages in the pool
echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
some exceptions can happen if westnon or network name service
not started before launch uos guest, like gvt and network exceptions,
which can cause SOS reboot. so add the dependency.
add data partiton check in launch script, for it can be called in every
clearlinux platform.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
add acrn_guest.service, and modify makefile to install it
into root fs.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Like Yan <like.yan@intel.com>
it can auto check android image, if exists, then launch it;
if not, it will try to luanch clearlinux. it can be used by
acrn_guest.service to auto boot UOS.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
offline SOS cpus except BSP to let them free for UOS cpu allocation
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
after enable all cpus during sos bootup, there should not be maxcpus option
here
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This reverts commit 47116e8c4b.
if eDP panel connected, something wrong happens:
eDP HDMI1 HDMI2
---------------------------------------------------------
SOS UOS1 UOS1 Good.
SOS UOS1 BAD. SOS is OK. NO show in HDMI1
SOS UOS1 BAD. SOS is OK. NO show in HDMI2
SOS BAD.
This is also a temp solution: if only HDMI2 is connected, SOS will be
shown on HDMI2. But UOS1 is expected in some cases.
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Reviewed-by: Min He <min.he@intel.com>
Now the guc loading is disabled on UOS. In such case it won't use
"GUC" mode to submit the GPU commands. So it is disabled explicitily
to avoid the useless check on UOS. This is also aligned with that on SOS.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
it's needed for trusty memory reservation.
Tracked-on: ccm0001001-242199
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Some UOS need use FB device to display, while initial_modeset will disable fb,
so we need remove correlation between plane restriction and initial modeset
in kernel driver, also don't need set enable_initial_modeset in launch script.
Signed-off-by: Fei Jiang <fei.jiang@intel.com>
Reviewed-by: Min He <min.he@intel.com>
Use right parameter in launch_uos.sh after updating prefer_msi option
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
HPET reading is much slower than TSC. Using it will hurt SOS performance
a lot, and then the whole system performance.
Remove the strict assignment from cmdline. Then SOS kernel will pickup
TSC as default clocksource.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
this patch add "reboot_panic=p,w" to command line of SOS to trigger
warm reboot on panic
Signed-off-by: zhouji3x <jianfengx.zhou@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When initial_modeset is enabled, will check EDID in early stage,
while sometime didn't get EDID in time through I2C, and will cause
CRTC not used correctly in some corner cases. Then we need force
enabling two HDMI connectors to attach CRTC in initial modeset stage.
Signed-off-by: Fei Jiang <fei.jiang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Reviewed-by: Min He <min.he@intel.com>
On SBL platform, UOS bsp always starts from realmode, which requires
the support of vSBL.
Boot kernel directly by -U option is no longer supported.
Remove -U option in launch script.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When connecting three monitors to MRB, we will assign the first one to
SOS and assign remaining ones to UOS.
Signed-off-by: Min He <min.he@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Now the IPU devices are always enabled. But they don't exist on some
boards. In such case some errors are warned and the system can't be booted.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin FengWei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Enable IOC for android on MRB by default.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Like Yan <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This reverts commit 5b1c536eee.
For normal case, we connected two HDMI monitors, one for SOS, another for UOS.
Previously UOS has problem when only see one display, it was the bug of
user space driver, then to work around this issue, submit temp patch to let
UOS see two displays.
From latest info, after switch to use github latest user spce driver in stable
branch, such problem was resolved. Then we need revert previous workaround
patch, otherwise, UOS will show on both HDMI1 and HDMI2.
This patch turn on WIFI/BT in launch_UOS.sh based on WIFI BDF on SBL,
which is different from ABL. Still need WIFI/BT driver in Android to
make WIFI/BT passthrough work.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Android HWC has problem when only see one display, then this is
workaround patch to make Android HDMI2 display normal.
V2: only change AaaG UOS kernel boot arg
Signed-off-by: Fei Jiang <fei.jiang@intel.com>
After i915.avail_planes_per_pipe(0x0000F) is added to SOS, it will cause
that the pipe B/C is initialized without plane. In such case this pipe
can't be used by UOS, with error: primary plane disabled.
The bootarg is changed so that the pipe B/C on SOS can be initialized with
at least one plane.
Signed-off-by: Jiang Fei <fei.jiang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Move the platform apl-mrb samples to devicemodel samples directory.
Add the install target to the missing samples files and re-organize the
samples directory structure to have nuc and apl-mrb samples.
Suggested-by: Arzhan Kinzhalin <arzhan.i.kinzhalin@intel.com>
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Liang Yang