When guest doing BAR re-programming, we should check whether
the base address of the BAR is valid.This patch does this check by:
1. whether the gpa is located in the responding MMIO window
2. whether the gpa is aligned with the BAR size
Tracked-On: #6011
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Now we use pci_vdev_update_vbar_base to update vBAR base address when
guest re-programming BAR. For a IO BAR, we would calculate the 32 bits
base address then mask the high 16 bits. However, the mask code would
never be called since the first if condition statement is always true.
This patch fix it by move the unamsk code into the first if condition
statement.
Tracked-On: #6011
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
generate_shadow_ept_entry() didn't verify the correctness of the requested
guest EPT mapping. That might leak host memory access to L2 VM.
To simplify the implementation of the guest EPT audit, hide capabilities
'map 2-Mbyte page' and 'map 1-Gbyte page' from L1 VM. In addition,
minimize the attribute bits of EPT entry when create a shadow EPT entry.
Also, for invalid requested mapping address, reflect the EPT_VIOLATION to
L1 VM.
Here, we have some TODOs:
1) Enable large page support in generate_shadow_ept_entry()
2) Evaluate if need to emulate the invalid GPA access of L2 in HV directly.
3) Minimize EPT entry attributes.
Tracked-On: #5923
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
L1 VM changes the guest EPT and do INVEPT to invalidate the previous
TLB cache of EPT entries. The shadow EPT replies on INVEPT instruction
to do the update.
The target shadow EPTs can be found according to the 'type' of INVEPT.
Here are two types and their target shadow EPT,
1) Single-context invalidation
Get the EPTP from the INVEPT descriptor. Then find the target
shadow EPT.
2) Global invalidation
All shadow EPTs of the L1 VM.
The INVEPT emulation handler invalidate all the EPT entries of the
target shadow EPTs.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When a shadow EPT is not used anymore, its resources need to be
released.
free_sept_table() is introduced to walk the whole shadow EPT table and
free the pagetable pages.
Please note, the PML4E page of shadow EPT is not freed by
free_sept_table() as it still be used to present a shadow EPT pointer.
Tracked-On: #5923
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With shadow EPT, the hypervisor walks through guest EPT table:
* If the entry is not present in guest EPT, ACRN injects EPT_VIOLATION
to L1 VM and resumes to L1 VM.
* If the entry is present in guest EPT, do the EPT_MISCONFIG check.
Inject EPT_MISCONFIG to L1 VM if the check failed.
* If the entry is present in guest EPT, do permission check.
Reflect EPT_VIOLATION to L1 VM if the check failed.
* If the entry is present in guest EPT but shadow EPT entry is not
present, create the shadow entry and resumes to L2 VM.
* If the entry is present in guest EPT but the GPA in the entry is
invalid, injects EPT_VIOLATION to L1 VM and resumes L1 VM.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
* Hide 5 level EPT capability, let L1 guest stick to 4 level EPT.
* Access/Dirty bits are not support currently, hide corresponding EPT
capability bits.
* "Mode-based execute control for EPT" is also not support well
currently, hide its capability bit from MSR_IA32_VMX_PROCBASED_CTLS2.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'struct nept_desc' is used to associate guest EPTP with a shadow EPTP.
It's created in the first reference and be freed while no reference.
The life cycle seems like,
While guest VMCS VMX_EPT_POINTER_FULL is changed, the 'struct nept_desc'
of the new guest EPTP is referenced; the 'struct nept_desc' of the old
guest EPTP is dereferenced.
While guest VMCS be cleared(by VMCLEAR in L1 VM), the 'struct nept_desc'
of the old guest EPTP is dereferenced.
While a new guest VMCS be loaded(by VMPTRLD in L1 VM), the 'struct
nept_desc' of the new guest EPTP is referenced. The 'struct nept_desc'
of the old guest EPTP is dereferenced.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To shadow guest EPT, the hypervisor needs construct a shadow EPT for each
guest EPT. The key to associate a shadow EPT and a guest EPT is the EPTP
(EPT pointer). This patch provides following structure to do the association.
struct nept_desc {
/*
* A shadow EPTP.
* The format is same with 'EPT pointer' in VMCS.
* Its PML4 address field is a HVA of the hypervisor.
*/
uint64_t shadow_eptp;
/*
* An guest EPTP configured by L1 VM.
* The format is same with 'EPT pointer' in VMCS.
* Its PML4 address field is a GPA of the L1 VM.
*/
uint64_t guest_eptp;
uint32_t ref_count;
};
Due to lack of dynamic memory allocation of the hypervisor, a array
nept_bucket of type 'struct nept_desc' is introduced to store those
association information. A guest EPT might be shared between different
L2 vCPUs, so this patch provides several functions to handle the
reference of the structure.
Interface get_shadow_eptp() also is introduced. To find the shadow EPTP
of a specified guest EPTP.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Shadow EPT uses lots of pages to construct the shadow page table. To
utilize the memory more efficient, a page poll sept_page_pool is
introduced.
For simplicity, total platform RAM size is considered to calculate the
memory needed for shadow page tables. This is not an accurate upper
bound. This can satisfy typical use-cases where there is not a lot
of overcommitment and sharing of memory between L2 VMs.
Memory of the pool is marked as reserved from E820 table in early stage.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Nested VM exits happen when vCPU is in guest mode (VMCS02 is current).
Initially we reflect all nested VM exits to L1 hypervisor. To prepare
the environment to run L1 guest:
- restore some VMCS fields to the value as what L1 hypervisor programmed.
- VMCLEAR VMCS02, VMPTRLD VMCS01 and enable VMCS shadowing.
- load the non-shadowing host states from VMCS12 to VMCS01 guest states.
- VMRESUME to L1 guest with this modified VMCS01.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Alexander Merritt <alex.merritt@intel.com>
Since L2 guest vCPU mode and VPID are managed by L1 hypervisor, so we
can skip these handling in run_vcpu().
And be careful that we can't cache L2 registers in struct acrn_vcpu.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
invvpid and invept instructions cause VM exits unconditionally.
For initial support, we pass all the instruction operands as is
to the pCPU.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Implement the VMLAUNCH and VMRESUME instructions, allowing a L1
hypervisor to run nested guests.
- merge VMCS control fields and VMCS guest fields to VMCS02
- clear shadow VMCS indicator on VMCS02 and load VMCS02 as current
- set VMCS12 launch state to "launched" in VMLAUNCH handler
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Alex Merritt <alex.merritt@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signature of RTCT ACPI table maybe "PTCT"(v1) or "RTCT"(v2).
and the MAGIC number in CRL header is also changed from "PTCM"
to "RTCM".
This patch refine the code to detect RTCT table for both
v1 and v2.
Tracked-On: #6020
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
For post launch VM, ACRN supports PTM under these conditions:
1. HW implements a simple PTM hierarchy: PTM requestor device (ep) is
directly connected to PTM root capable root port. Or
2. ptm requestor itself is root complex integrated ep.
Currently acrn doesn't support emulation of other type of PTM hiearchy, such
as if there is an intermediate PTM node (for example, switch) inbetween
PTM requestor and PTM root.
To avoid VM touching physical hardware, acrn hv ensures PTM is always enabled
in the hardware.
During hv's pci init, if root port is ptm capable,
hv will enable PTM on that root port. In addition,
log error (and don't enable PTM) if ptm root
capability is on intermediate node other than root port.
V2:
- Modify commit messages to clarify the limitation
of current PTM implementation.
- Fix code that may fail FUSA
- Remove pci_ptm_info() and put info log inside pci_enable_ptm_root().
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In physical destination mode, the destination processor is specified by its
local APIC ID. When a CPU switch xAPIC Mode to x2APIC Mode or vice versa,
the local APIC ID is not changed. So a vcpu in x2APIC Mode could use physical
Destination Mode to send an IPI to another vcpu in xAPIC Mode by writing ICR.
This patch adds support for a vCPU A could write ICR to send IPI to another
vCPU B which is in different APIC mode.
Tracked-On: #5923
Signed-off-by: Li Fei1 <fei1.li@intel.com>
So that DM can retrieve physical APIC IDs and use them to fill in the ACPI MADT table for
post-launched VMs.
Note:
1. DM needs to use the same logic as hypervisor to calculate vLAPIC IDs based on physical APIC IDs
and CPU affinity setting
2. Using reserved0[] in struct hc_platform_info to pass physical APIC IDs means we can only support at
most 116 cores. And it assumes LAPIC ID is 8bits (X2APIC mode supports 32 bits).
Cat IDs shift will be used by DM RTCT V2
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Using physical APIC IDs as vLAPIC IDs for pre-Launched and post-launched VMs
is not sufficient to replicate the host CPU and cache topologies in guest VMs,
we also need to passthrough host CPUID leaf.0BH to guest VMs, otherwise,
guest VMs may see weird CPU topology.
Note that in current code, ACRN has already passthroughed host cache CPUID
leaf 04H to guest VMs
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
In current code, ACRN uses physical APIC IDs as vLAPIC IDs for SOS,
and vCPU ids (contiguous) as vLAPIC IDs for pre-Launched and post-Launched VMs.
Using vCPU ids as vLAPIC IDs for pre-Launched and post-Launched VMs
would result in wrong CPU and cache topologies showing in the guest VMs,
and could adversely affect performance if the guest VM chooses to detect
CPU and cache topologies and optimize its behavior accordingly.
Uses physical APIC IDs as vLAPIC IDs (and related CPU/cache topology enumeration
CPUIDs passthrough) will replicate the host CPU and cache topologies in pre-Launched
and post-Launched VMs.
Tracked-On: #6020
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Remove the direct calls to exec_vmptrld() or exec_vmclear(), and replace
with the wrapper APIs load_va_vmcs() and clear_va_vmcs().
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
This patch implements the VMREAD and VMWRITE instructions.
When L1 guest is running with an active VMCS12, the “VMCS shadowing”
VM-execution control is always set to 1 in VMCS01. Thus the possible
behavior of VMREAD or VMWRITE from L1 could be:
- It causes a VM exit to L0 if the bit corresponds to the target VMCS
field in the VMREAD bitmap or VMWRITE bitmap is set to 1.
- It accesses the VMCS referenced by VMCS01 link pointer (VMCS02 in
our case) if the above mentioned bit is set to 0.
This patch handles the VMREAD and VMWRITE VM exits in this way:
- on VMWRITE, it writes the desired VMCS value to the respective field
in the cached VMCS12. For VMCS fields that need to be synced to VMCS02,
sets the corresponding dirty flag.
- on VMREAD, it reads the desired VMCS value from the cached VMCS12.
Tracked-On: #5923
Signed-off-by: Alex Merritt <alex.merritt@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch is to emulate VMCLEAR instruction.
L1 hypervisor issues VMCLEAR on a VMCS12 whose state could be any of
these: active and current, active but not current, not yet VMPTRLDed.
To emulate the VMCLEAR instruction, ACRN sets the VMCS12 launch state to
"clear", and if L0 already cached this VMCS12, need to sync it back to
guest memory:
- sync shadow fields from shadow VMCS VMCS to cache VMCS12
- copy cache VMCS12 to L1 guest memory
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Enable VMCS shadowing for most of the VMCS fields, so that execution of
the VMREAD or VMWRITE on these shadow VMCS fields from L1 hypervisor
won't cause VM exits, but read from or write to the shadow VMCS.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Alexander Merritt <alex.merritt@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Software layout of VMCS12 data is a contract between L1 guest and L0
hypervisor to run a L2 guest.
ACRN hypervisor caches the VMCS12 which is passed down from L1 hypervisor
by the VMPTRLD instructin. At the time of VMCLEAR, ACRN syncs the cached
VMCS12 back to L1 guest memory.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch emulates the VMPTRLD instruction. L0 hypervisor (ACRN) caches
the VMCS12 that is passed down from the VMPTRLD instruction, and merges it
with VMCS01 to create VMCS02 to run the nested VM.
- Currently ACRN can't cache multiple VMCS12 on one vCPU, so it needs to
flushes active but not current VMCS12s to L1 guest.
- ACRN creates VMCS02 to run nested VM based on VMCS12:
1) copy VMCS12 from guest memory to the per vCPU cache VMCS12
2) initialize VMCS02 revision ID and host-state area
3) load shadow fields from cache VMCS12 to VMCS02
4) enable VMCS shadowing before L1 Vm entry
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
This patch implements the VMXOFF instruction. By issuing VMXOFF,
L1 guest Leaves VMX Operation.
- cleanup VCPU nested virtualization context states in VMXOFF handler.
- implement check_vmx_permission() to check permission for VMX operation
for VMXOFF and other VMX instructions.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
According to VMXON Instruction Reference, do the following checks in the
virtual hardware environment: vCPU CPL, guest CR0, CR4, revision ID
in VMXON region, etc.
Currently ACRN doesn't support 32-bit L1 hypervisor, and injects an #UD
exception if L1 hypervisor is not running in 64-bit mode.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch emulates VMXON instruction. Basically checks some
prerequisites to enable VMX operation on L1 guest (next patch), and
prepares some virtual hardware environment in L0.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
The commit 2ab70f43e5
HV: cache: Fix page fault by flushing cache for VM trusty RAM in HV
It is wrong in using stac()/clac()
Tracked-On: #6020
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Now guest would use `Destination Shorthand` to broadcast IPIs if there're more
than one destination. However, it is not supported when the guest is in LAPIC
passthru situation, and all active VCPUs are working in X2APIC mode. As a result,
the guest would not work properly since this kind broadcast IPIs was ignored
by ACRN. What's worse, ACRN Hypervisor would inject GP to the guest in this case.
This patch extend vlapic_x2apic_pt_icr_access to support more destination modes
(both `Physical` and `Logical`) and destination shorthand (`No Shorthand`, `Self`,
`All Including Self` and `All Excluding Self`).
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The accrss right of HV RAM can be changed to PAGE_USER (eg. trusty RAM
of post-launched VM). So before using clflush(or clflushopt) to flush
HV RAM cache, must allow explicit supervisor-mode data accesses to
user-mode pages. Otherwise, it may trigger page fault.
Tracked-On: #6020
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Hypervisor does not need to care about hugepage settings in SOS kernel, user
could enable these settings in the scenario config file or GRUB menu.
Tracked-On: #5815
Signed-off-by: Victor Sun <victor.sun@intel.com>
changes:
1. The VM load order type condition is not needed, since the function
is called only when create SOS VM or pre-launched VM;
2. Fixed wrong parameter of fill_seed_arg() which introduced by commit
80262f0602.
3. More comments on why multiboot string could override the pre-
configured VM bootargs and why append multiboot cmdline to SOS VM
bootargs;
Tracked-On: #5815
Signed-off-by: Victor Sun <victor.sun@intel.com>
Use BUILD_VERSION an BUILD_TAG variable also for hypervisor,
acrnprobe and crashlog. This eases build from an archive without
git available.
Tracked-On: #6035
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
Make builds reproducible by honoring SOURCE_DATE_EPOCH and USER
environment variables in the respective Makefiles. Just follow the
recommendations at https://reproducible-builds.org/
Build tools (e.g. Debian packaging, Yocto) use this to ensure reproducibility
of packages.
Tracked-On: #6035
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
Create virtual root port through add_vdev hypercall. add_vdev
identifies the virtual device to add by its vendor id and device id, then
call the corresponding function to create virtual device.
-create_vrp(): Find the right virtual root port to create
by its secondary bus number, then initialize the virtual root port.
And finally initialize PTM related configurations.
-destroy_vrp(): nothing to destroy
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Add virtual root port that supports the most basic pci-e bridge and root port operations.
- init_vroot_port(): init vroot_port's basic registers.
- deinit_vroot_port(): reset vroot_port
- read_vroot_port_cfg(): read from vroot_port's virtual config space.
- write_vroot_port_cfg(): write to vroot_port's virtual config space.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Jason Chen <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
If PTM can be enabled on passthru device, a virtual root port
is added to vm to act as ptm root. And the passthru device is
connected to the virtual root port instead of the virtual host bridge.
Tracked-On: #5915
Signed-off-by: Rong Liu <rong.l.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. do not allow external modules to touch internal field of a timer.
2. make timer mode internal, period_in_ticks will decide the mode.
API wise:
1. the "mode" parameter was taken out of initialize_timer().
2. a new function update_timer() was added to update the timeout and
period fields.
3. the timer_expired() function was extended with an output parameter
to return the remaining cycles before expiration.
Also, the "fire_tsc" field name of hv_timer was renamed to "timeout".
With the new API, however, this change should not concern user code.
Tracked-On: #5920
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
x86/timer.[ch] was moved to the common directory largely unchanged.
x86 specific code now resides in x86/tsc_deadline_timer.c and its
interface was defined in hw/hw_timer.h. The interface defines two
functions: init_hw_timer() and set_hw_timeout() that provides HW
specific initialization and timer interrupt source.
Other than these two functions, the timer module is largely arch
agnostic.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Modules that use udelay() should include "delay.h" explicitly.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Generalize and split basic cpu cycle/tick routines from x86/timer:
- Instead of rdstc(), use cpu_ticks() in generic code.
- Instead of get_tsc_khz(), use cpu_tickrate() in generic code.
- Include "common/ticks.h" instead of "x86/timer.h" in generic code.
- CYCLES_PER_MS is renamed to TICKS_PER_MS.
The x86 specific API rdstc() and get_tsc_khz(), as well as TSC_PER_MS
are still available in arch/x86/tsc.h but only for x86 specific usage.
Tracked-On: #5920
Signed-off-by: Rong Liu <rong2.liu@intel.com>
Signed-off-by: Yi Liang <yi.liang@intel.com>
RTCT has been updated to version 2,
this patch updates hypervisor RTCT parser to support
both version 1 and version 2 of RTCT.
Tracked-On: #6020
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason CJ Chen <jason.cj.chen@intel.com>
'psram' and 'PSRAM' are legacy names and replaced
with 'ssram' and 'SSRAM' respectively.
Tracked-On: #6012
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuang Zheng <shuang.zheng@intel.com>
Define LIST_OF_VMX_MSRS which includes a list of MSRs that are visible to
L1 guests if nested virtualization is enabled.
- If CONFIG_NVMX_ENABLED is set, these MSRs are included in
emulated_guest_msrs[].
- otherwise, they are included in unsupported_msrs[].
In this way we can take advantage of the existing infrastructure to
emulate these MSRs.
Tracked-On: #5923
Spick igned-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to support nested virtualization, need to expose the "Enable VMX
outside SMX operation" bit to L1 hypervisor.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Tao Yuhong