In current code, the timer_list for per cpu can be accessed both in
vmexit and softirq handler. There is a case that, the timer_list is
modifying in vmexit, but an interrupt occur, the timer_list is also
modified in softirq handler. So the time_list may in unpredictable
state. In some platforms, the hv console may hang as its timer handler
is not invoked because of the corruption for timer_list.
So, to fix the issue, disable the interrupt before modifying the
timer_list.
Tracked-On: #3512
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
This patch adds prefix 'p' before 'cpu' to physical cpu related functions.
And there is no code logic change.
Tracked-On: #2991
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- move this api from misc.c to timer.c to avoid
reverse dependency, and remove misc.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
move instr_emul_ctxt instance from struct per_cpu_region
to struct vcpu, and rename it from g_inst_ctxt to inst_ctxt
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- change 'tsc_khz' to static
-- move these APIs from rtl.h to timer.c
us_to_ticks()
ticks_to_us()
ticks_to_ms()
rdtsc()
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix
1."Value is not of appropriate type."
2."Function prototype/defn param type mismatch"
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Change boot_cpu_data to static, only used in cpu_caps.c,
-- Add get_cpu_info() api, it will call this api instead of
boot_cpu_data except cpu_caps.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
there is no need to clear CR4.TSD as there is no user mode
in ACRN hypervisor.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Misra C reqires assembly code should comply with
the rules list below:
The assembly code's functionality should match the function's
name.If not,pls encapsulate the assembly code and give a suitable
name for describing the functionality.
V1->V2:
1.remove the dead code
2.update detail comment
V2->V3:
1.replace the macro name with upper case.
2.remove the typedef and rename the struct name
"_descriptor_table_" to "descriptor_table".
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix violations for function whose parameter can be read-only.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
Timer IRQ was static mapped IRQ.
It should not be cleaned up when one of the cpu dead.
The patch will retain the timer irq.
Tracked-On: #1359
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRAC has requirements about literal value requires a U suffix and
signed/unsigned conversion with cast. This patch is used to solve
these violations.
v1->v2
*Drop the cast of sz from uint32_t to int32_t, the signed/unsigned
violation of nchars will be solved by other patch together with
printf/sprintf/console/vuart/uart code.
*Delete the unnecessary L suffix of shifting operand.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Reviewed by: Junjie Mao <junjie.mao@intel.com>
Since these APIs always return 0,
change them to void type,
vcpu_set_cr0()
vmx_write_cr0()
vcpu_set_cr4()
vmx_write_cr4()
kick_notification()
tsc_deadline_handler()
dmar_fault_handler()
ptdev_interrupt_handler()
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
There are several similar irq handlers with confusing function names and it's
not friendly to call update_irq_handler() to update a proper handler after
request_irq().
With this commit, a single generic irq handler is being used, in which, no lock
need to be acquired because our design could guarantee there is no concurrent
irq handling and irq handler request/free.
A flags field is added to irq_desc struct to select the proper processing flow
for an irq. Irqflags is defined as follows:
IRQF_NONE (0U)
IRQF_LEVEL (1U << 1U) /* 1: level trigger; 0: edge trigger */
IRQF_PT (1U << 2U) /* 1: for passthrough dev */
Because we have only one irq handler, update_irq_handler() should be replace by
set_irq_trigger_mode(), whichs set trigger mode flag of a certian irq.
Accordingly, the code where called update_irq_handler() need to be updated.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit cleans up fiels of struct irq_desc:
- remove name, irq_desc_state, irq_cnt and irq_lost_cnt which are not used.
- remove irq_ prefix of irq_lock field of struct irq_desc;
- change enum irq_state to enum irq_use_state;
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
removed some unnecessary variables and functions.
v1-->v2:
Replace div-by-zero with an inline ASM code
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit cleans up the irq APIs which are a bit confusing.
- pri_register_handler(), normal_register_handler() and
common_register_handler() into request_irq(), and removed
the unnecessary struct irq_request_info;
- rename the unregister_common_handler() to free_irq();
After the revision, the common irq APIs becomes:
- int32_t request_irq(uint32_t irq,
irq_action_t action_fn,
void *action_data,
const char *name)
- void free_irq(uint32_t irq)
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since vector is x86 specific concept, we'd like to hide it from common irq APIs.
This commit
- adds static irq:vector mappings for special interrupt such as timer
and cpu notification;
- reserves the irq and vector at initialization;
- removed the vector argument in pri_register_handler(), get reserved vector
from irq_desc in common_register_handler().
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since we don't support shared irq, dev_handler_node which works as action node,
is not needed anymore.
This commit removes the dev_handler_node struct and does some relevant changes,
including:
- moves necessary fields to struct irq_desc: action, priv_data, name; and
removes unused handler_data;
- changes return type of pri_/normal_register_handler() from dev_handler_node*
to int32_t, which is irq num (>= 0) on success, and errno (> 0) on failure.
- changes unregister_irq_handler() to take argument unint32_t instead of
dev_handler_node*;
- changes are made to the places where these APIs are called.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Sometimes the CPUID(0x15) still returns the zero tsc frequency. In such case
the base frequency of cpuid(0x16) is used as tsc frequency.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The bracket is required when the level of precedence of
the operators is less than 13. Add the bracket to logical
conjunctions. The commit applys the rule to the files under
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are potential value outside range of underlying type
in some assignment expressions. This violates Rule 10.3 or
Rule 10.4 of MISRA C:2012.
BTW, all operations shall be conducted in exactly the same
arithmetic (underlying) type, otherwise, there is a
value outside range violation.
Update related assignment expressions.
V1-->V2:
* Fix potential overflow in "pit_calibrate_tsc";
* Move PTDEV_INVALID_PIN definition before
get_entry_info since this MACRO is only used by
debug function.
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Since global vector table is being used on all pcpus, it's not necessary to request timer irq
at each cpu init. With this change, per_cpu timer nodes are removed, and only BSP registers
and unregisters timer irq.
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to comply with MISRA C rules, renamed vairables
and function names starting with "_".
The major changes invloves mostly static function
names, as they are being called inside the same file
by a wrapper function.
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
1. add register_softirq to register a softirq handler
2. rename exec_softirq to do_softirq; raise_softirq to fire_softirq.
3. in do_softirq call registered softirq handler not call
the device softirq handle function directly
4. enable irq after vm exit and disable irq after the first
call do_softirq before vm enter.
5. call do_softirq again when irq disabled to handle the risk
unhandled softirq.
6. rename SOFTIRQ_DEV_ASSIGN to SOFTIRQ_PTDEV
7. remove SOFTIRQ_ATOMIC
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Softirq is not x86 architectural related.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The variable timer's name is identical with struct
timer s name. This MISRA C violation is detected
by static analysis tool.
According to naming convention rule: If the data
structure type is used by multi modules, its
corresponding logic resource is only used by
hypervisor/host and isn't exposed to external
components (such as SOS, UOS), its name meaning
is simplistic (such as timer), its name needs prefix
"hv_".
Rename struct timer as struct hv_timer.
Replace regular expression:s/struct timer\([ ),;\t\*]\+\)
/struct hv_timer\1
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra c required parameter should not changed in the scope
of function,use local variable to replace it.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Fix x86 directory violations which related to integer problems,
some of problems are skipped because of ldra's false positive.
V1->V2 1.modified the code style
2.fix all macro VM_EXIT_IO_INSTRUCTION related
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Added brackets for expression to make it easy to understand and
reduce the mistake of precedence. The rule is applied to the
mixed same level of prevedence opeartors, high level presedence
operators and logical expression.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are some integer type conversions in the VMX, timer
and MTTR module detected by static analysis tool.
Update related integer type in VMX, timer and MTTR
module.
Add related constant value with 'U/UL' suffix.
V1-->V2:
Resolve few rebase conflicts.
V2-->V3:
Add 'h' for uint16_t argument in log function;
Update the type of temp variable 'type' as uint8_t
in MTTR module to reduce type conversion.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
NR_MAX_IRQS is defined as 272 and IRQ_INVALID as 273 which implies
that 272 is a valid irq number. In this case, an illegal access can
occur at run time when irq_desc_array[] or irq_count[] is accessed
with index 272. This fix stops the illegal access by renaming
NR_MAX_IRQS to NR_IRQS and then places proper conditions for range
checks. If the index is >= NR_IRQS, then index is invalid otherwise
its considered valid for accessing irq arrays. IRQ_INVALID definition
is also changed to 0xffffffffU to indicate maximum unsigned value.
Signed-off-by: Madeeha Javed <madeeha_javed@mentor.com>
To follow the Misra-c standard, any operators should be done outside
the conditions. Removed the prefix, postfix and bitwise shift from
conditions.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch represents TSC freqeuency in KHz using a 32-bit unsigned integer.
The conversion macros between ticks and us/ms are changed to inline functions to
enforce the types of the input parameters. Note that us_to_ticks accepts only
uint32_t (~4K us at most) and never overflows.
Results of some unit tests on the conversion functions:
calibrate_tsc, tsc_khz=1881600
64us -> ticks: 120422
64us -> ticks -> us: 63
511us -> ticks: 961497
511us -> ticks -> us: 510
1280000 ticks -> us: 680
1280000 ticks -> us -> ticks: 1279488
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
phys_cpu_num is more popular than phy_cpu_num, update them
through command.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the hypervisor, physical cpu id is defined as "int" or "uint32_t"
type in the hypervisor. So there are some sign conversion issues
about physical cpu id (pcpu_id) reported by static analysis tool.
Sign conversion violates the rules of MISRA C:2012.
In this patch, define physical cpu id as "uint16_t" type for all
modules in the hypervisor and change related codes. The valid
range of pcpu_id is 0~65534, INVALID_PCPU_ID is defined to the
invalid pcpu_id for error detection, BROADCAST_PCPU_ID is
broadcast pcpu_id used to notify all valid pcpu.
The type of pcpu_id in the struct vcpu and vcpu_id is "int" type,
this will be fixed in another patch.
V1-->V2:
* Change the type of pcpu_id from uint32_t to uint16_t;
* Define INVALID_PCPU_ID for error detection;
* Define BROADCAST_PCPU_ID to notify all valid pcpu.
V2-->V3:
* Update comments for INVALID_PCPU_ID and BROADCAST_PCPU_ID;
* Update addtional pcpu_id;
* Convert hexadecimals to unsigned to meet the type of pcpu_id;
* Clean up for MIN_PCPU_ID and MAX_PCPU_ID, they will be
defined by configuration.
Note: fix bug in the init_lapic(), the pcpu_id shall be less than 8,
this is constraint by implement in the init_lapic().
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Conghui Chen