Now, we treat a read/write ENODEV error as a firmware reset. When MEI
reset happens in driver, we need disconnect all active clients and
restart HBM flow.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
HECI Bus Message is important for HECI clients communication. They use
HBM for connect, disconnect, get property and so on. In backend service,
we need do some emulation for HBM as we are running on top of native
MEI driver.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Backend service access the native HECI driver through MEI driver
interface in service OS. Some MEI clients need to be multiplexed,
the backend service will engage necessary service at clients filter.
TX thread is for passing data from guest to host MEI driver, then to
native hardware. RX thread is for passing data from native hardware to
guest.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ME client mapping is for tracking ME clients operations between frontend
driver and backend service. It contains buffers for send/recv packing
and forwarding.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implement HECI virtualization backend service based on virtio
userspace framework. This service introduce a virtio-heci device model
for DM, and can be enabled by DM parameter '-s [BUS NO],virtio-heci'.
The HECI virtualization need both backend service in device-model and
frontend driver in guest to work. Backend service mainly emulates HECI
device's behaviors to satisfy frontend driver. They are based on virtio
userspace framework. Currently, it is using two virtqueues, one is for
TX and another is for RX.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The 'find' command was not installed in our minimal Fedora 26
and 27-based Docker images. This resulted in a non-fatal error
when performing a 'make clean'. This commit adds this utility
(available in the 'findutils' package).
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
A couple of problems appeared on Ubuntu 14.04 (gcc 4.8.4) when we
turned on additional compiler flags with commit
519c4285cf104a594776591075ee1c6ee4d61815a. This patch fixes these
problems by adhering to the strict anti-aliasing rules and also
initializing the 'tfd' variable where the compile believed it
_could_ be used uninitialized.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
sync acrn_common.h to device model
set secure world enabled flag
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
malloc: allocate a block of memory, the contents of the block are undefined.
calloc: allocate a block of memory for an array of num elements and initializes all its bits to zero.
Signed-off-by: yechunliang <yechunliangcn@163.com>
for (int i = 0; i < ...; i++) is only allowed in C99 mode, so fix this
coding style to:
int i;
for (i = 0; i < ...; i++)
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With the DSDT which include virtual _PSS/_PCT/_PPC objects, UOS should
have ACPI Px control capability if acpi cpufreq driver is enalbed in
kernel.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Some ACPI objects is per-vm and per-cpu specific so we need to pass
vmctx as function parameter when we write objects into DSDT table.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
There are 3 ACPI objects for Px: _PCT, _PPC and _PSS need to be writed
to DSDT, and the _PSS data is per-cpu specific so we need to pass the
vm id and vcpu id as parameter.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The px count and data is per-cpu so we should query them for specific
vm and specific vcpu, for px data we need to specify px num also.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The interface will be used to interact with VHM service via IOCTL.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The acrnctl can help user to create, delete, launch and stop UOSs,
To see what it can do, just run:
# acrnctl
or
# acrnctl help
you may see:
support:
list
start
stop
del
add
Use acrnctl [cmd] help for details
There are examples:
(1) add a VM
Each time you can just add one VM. Suppose you have an UOS
launch script, such as launch_UOS.sh
you can run:
# acrnctl add launch_UOS.sh -U 1
vm1-14:59:30 added
Note that, launch script shoud be able to launch ONE UOS. If
it fail, it is better to print some error logs, to tell user
the reason, so that he knows how to solve it.
The vmname is important, the acrnctl searchs VMs by their
names. so duplicated VM names are not allowed. Beside, if the
launch script changes VM name at launch time, acrnctl will
not recgonize it.
(2) delete VMs
# acrnctl del vm1-14:59:30
(3) show VMs
# acrnctl list
vm1-14:59:30 untracked
vm-yocto stop
vm-android stop
(4) start VM
you can start a vm with 'stop' status, each time can start
one VM.
# acrnctl start vm-yocto
(5) stop VM
you can stop VMs, if their status is not 'stop'
# acrnctl stop vm-yocto vm1-14:59:30 vm-android
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Signed-off-by: Tao, Yuhong <yuhong.tao@intel.com>
A monitor component will be added to acrn-dm, which crteats socket,
bind and listening at /run/acrn/vmname. Acrnctl & acrnd could conn
-ect to the socket for communication, using defined message, in
include/monitor_msg.h
For each defined message, a message handler callback could be
registered via monitor_add_msg_handler(). On received of a defined
message, a certain call back will be called. Each callback can only
see the message sender's socket-fd.
When acrn-dm want report something, not triggered by incoming message
it can send broadcast message, use monitor_broadcast().
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin, Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao, Yuhong <yuhong.tao@intel.com>
Enable Travis CI testing for the following development host OSs:
* Clearlinux
* Ubuntu 16.04
* Fedora 26
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The patch includes:
1. vrtc_cleanup -> vrtc_deinit to align with other devices
2. delete timer created in vrtc_init
3. make call to vrtc_deinit in cleanup path
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
old code has no deinit functionality for virtual keyboard device.
Which will trigger resource leak when system is reboot.
deinit function is added to:
1. deinit low ps2 based keyboard and mouse
2. release memory/io resource of virtual keyboard device
NOTE: IRQ resource will be handed in pci irq module
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Add deinit function for ps2kbd and ps2mouse.
To support deinit function for ps2kbd and ps2mouse which
has struct atkbdc_base as parameter, we make struct
atkbdc_base exported as public.
We also add console unregister function for keyboard
and mouse. Which are called in ps2mouse/ps2kbd deinit
function.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
We didn't release mmio/io data structure related with PCI bar
of pci dev. Which could trigger memory leak when reboot UOS.
With the new patch, we release the mmio/io data structure
when pci core tries to deinit pci device.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Virtio 1.0 introdues a generation number for the device-specific
configuration. It should be increased every time the configuration
noticeably changes.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When the device has experienced an error from which it cannot
re-cover, DEVICE_NEEDS_RESET is set to the device status register
and a config change intr is sent to the guest driver.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Virtio modern changed the virtqueue cofiguration precedures. GPA
of descriptor table, available ring and used ring are written to
common configuration registers separately. A final write to
Q_ENABLE register triggered initialization of the virtqueue on
the backend device.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
virtio_notify_cfg_write is called when guest driver performs virtqueue
kick by writing the notificaiton register of the virtqueue.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Registers in the isr configuration region are read-only.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the read/write callbacks for the registers in the
device-specific region. This region is implemented in the modern MMIO
bar.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the read/write callbacks for the registers in the
common configuration region. This region is implemented in the modern
MMIO bar.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the generic PCI barread/barwrite callbacks.
Specific barread/barwrite interfaces are called based on the baridx.
Virtio legacy devices, transitional devices and modern devices can
be handled in an unified way.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
virtio_set_modern_bar is an external interface that backend virtio
driver can call to initialize the PCI capabilities and PCI bars
defined in the virtio 1.0 spec.
The following are done in the function:
- 5 PCI capabilities are added to the PCI configuration space of the
virtio PCI device. (common/isr/device_specific/notify/cfg_access)
- A 64-bit MMIO bar is allocated to accommodate the registers defined
in the 4 PCI capabilities. (cfg_access capability does not require
MMIO.)
- If use_notify_pio is true, a PIO notify capability is added to the
PCI configuration space and a PIO bar is allocated for it
accordingly.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Struct virtio_base and struct virtio_vq_info are expanded to support
virtio 1.0 framework. The BAR layouts of virtio legacy/transitional/
modern are introduced as well.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds virtio 1.0 data structures and macros according to
virtio spec v1.0 cs4. Part of them are referenced from Linux's
BSD-licensed include/uapi/linux/virtio_pci.h
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pci_emul_add_capability is needed by virtio 1.0 framework to add
pci vendor capability from outside of pci core.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The trusty enabled or not will be passed to HV
with create vm hypercall. It's passed to vSBL within
config page also.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
acrnlog should run automatically at boot.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
acrnlog is an SOS userland tool to capture ACRN hypervisor log
to /tmp/acrnog/. Two kinds of logs would be saved:
- log of current running;
- log of last running if crashed and logs remaining.
[Usage] acrnlog [-s] [size] [-n] [number]
[Options]
-h: print this message
-s: size limitation for each log file, in MB.
0 means no limitation.
-n: how many files you would like to keep on disk
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Script usage:
[Usage] acrnalyze.py [options] [value] ...
[options]
-h: print this message
-i, --ifile=[string]: input file
-o, --ofile=[string]: output file
--vm_exit: to generate vm_exit report
Note: bash and python2 are required.
Example:
Assumed trace data have been copied to /home/xxxx/trace_data/20171115-101605
# acrnalyze.py -i /home/xxxx/trace_data/20171115-101605/0 -o /home/xxxx/trac
e_data/20171115-101605/cpu0 --vm_exit
- "--vm_exit" specify the analysis to do, currently, only vm_exit analysis
is supported.
- A preprocess would be taken out to make the trace data start and end with
an VM_ENTER, and a copy of original data file is saved with suffix ".orig";
- Analysis report would be given on the std output and in a csv file with
name specified via "-o outpu_file";
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
acrntrace: is an debug tool running on SOS to capture trace data.
Usage:
1) Start tracing
Capture buffered trace data:
# acrntrace
or clear buffer before tracing start:
# acrntrace -c
A folder will be created to save the trace data files are under
/tmp/acrntrace/, named with time string.
Eg: /tmp/acrntrace/20171115-101605
2) Stop tracing
# q <enter>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we could use option:
-s 3,virtio-blk,/XXXX_vdisk_file,b
to show this virtio device is boot device for guest.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Some guests needs guest partition info passed to support
A/B boot. DM needs to load guest partition info from file
and pass to vsbl.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are two things here:
1. Enable basic vsbl boot functionality.
2. add long option to DM to specific vsbl file. So DM could
choice to boot guest with vsbl.
It's hard to find a suitable short option. So only long option
is supported for vsbl file name option.
If long option "--vsbl='vsbl_file_name'" is given in DM
commandline, the "vsbl_file_name" will be loaded by DM
first and running. vsbl will be response to lead guest to
next boot stage.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Will update e820 table to mark the address ACPI specific type.
Also need pass ACPI table start address and size to vsbl.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
To align with file name, acrn_sw_load_direct() is changed
to acrn_sw_load_bzimage().
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
gcc8 showed following errors when build DM:
error: argument to ‘sizeof’ in ‘strncpy’ call is the same
expression as the source; did you mean to use the size of the
destination? [-Werror=sizeof-pointer-memaccess]
It looks like wrong parameter was given to strncpy.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The common loader code is put to sw_load_common.c
The loader code for directly kernel loading is put to sw_load_bzimage.c
The further change for SBL will be put to sw_load_sbl.c
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
New compiler options introduced by commit
519c4285cf will cause DM compile failure
which caused by warnings from some snprintf usage might be truncated.
Expanding the string buffer to make compiler happy.
v3: change format string
v2: Address comment from Hao, shrink bident string size to satify
tname length in blockif_open.
Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Some virtio PCI devices can change the device configuration state, as
reflected in the device-specific configuration region of the device. In
this case:
* If MSI-X capability is disabled:
1. Set the second lower bit of the ISR Status field for the device
2. Send the appropriate PCI interrupt for the device.
* If MSI-X capability is enabled:
1. If config_msix_vector is not NO_VECTOR, request the appropriate
MSI-X interrupt message for the device, config_msix_vector sets
the MSI-X Table entry number.
A single interrupt MAY indicate both that one or more virtqueue has been
used and that the configuration space has changed.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
IPU devices are using I2C device with physical BDF 0:16.0.
The I2C controller has the dependency on ACPI info.
This patch is to add ACPI info for the I2C controller and the two IPU
devices that are under the scope of I2C.
Note:
This patch is specific for GP platform.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Linux kernel CF9 reboot is doing things like:
- read value from 0xcf9
- mask out the value according to the reboot type (warm vs cold)
- BIT OR the value with reboot code
- write the value to 0xcf9
If there are two reboot event and the first one is cold
reboot and the second one is warm reboot, vsbl query
reboot type after the second one and will get code reboot
instead of warm reboot.
We should clear the data of 0xcf9 if guest request cold reboot.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
There are bootloaders require cold reboot as ACPI reboot
instead of warm reboot.
So we set 0xE to reset value of FADT to make ACPI reboot
cold reboot.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
RELRO rearranges the data sections inside an ELF
executable. It also marks certain areas as 'read-only'
so that these data structures cannot be overwritten while
the process is running.
Tracked-On: 224003
Signed-off-by: wenshelx <wenshengx.wang@intel.com>
Enable stack-proctector-strong option for gcc emiting
extra code to check buffer overflow.
Enable noexecstack option for marking the object as not
requiring executable stack.
Tracked-On: 224003
Signed-off-by: wenshelx <wenshengx.wang@intel.com>
Writing PCIR_BIOS is to get PCI ROM resource length. Ingore the request
as it's not support currently. Else, guest might get wrong information
about the PCI ROM resource.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
* Convert the README file to reStructuredText (ReST)
* Add more details (such as build dependencies) for Fedora 27
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The demos scripts are not installed when "make install" is invoked.
This patch adds a rule to copy them to /usr/share/acrn
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Liu Shuo