Move rpmb_sim.c and rpmb_backend.c to hw/platform/rpmb/
Signed-off-by: Huang Yang <yang.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
A simulated rpmbfile requires to enable 4MB access by writing
the last byte.
Otherwise, the read operation should be failed if no write
was operated on the address greater than the read address.
Writing the last byte during file creating ensures the whole
4MB address is readable.
Signed-off-by: Huang Yang <yang.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Fix by a fixed string length and correcting return value
Signed-off-by: Huang Yang <yang.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
With '--ptdev_no_reset', DM doen not abort but warn when assign PCIe
dev without reset capability.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Check reset method for PCIe dev according to 'reset' in sysfs, which
indicates reset capability, like FLR and secondary bus reset. PCIe dev
without reset capability is refused for passthrough to avoid failure
after UOS reboot.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Support log level options, which could change the related log level
without code change.
The new usage:
-s <n>,xhci,[bus1-port1,bus2-port2]:[tablet]:[log=x]
eg: -s 8,xhci,1-2,2-2:log=D
eg: -s 7,xhci,tablet
eg: -s 7,xhci,1-2,2-2:tablet
Note: please follow the board hardware design, assign the ports
according to the receptacle connection
Change-Id: I44639c7b076d21a40eb8f7b99cea8decc5c13c0c
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Re-write the xHCI option parse function to support port mapper.
The new usage:
-s <n>,xhci,[bus1-port1,bus2-port2]:[tablet]
eg: -s 8,xhci,1-2,2-2
eg: -s 7,xhci,tablet
eg: -s 7,xhci,1-2,2-2:tablet
Note: please follow the board hardware design, assign the ports
according to the receptacle connection
Change-Id: I3c8392f7e15580cf768c8c4a619d705411da699d
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add support for xHCI de-initialization when the guest
dose shutdown or reboot.
Change-Id: I3dfc1ed1a905b455ef455dff2065e872aa5c1ef8
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add support for xHCI port sharing feature, which enable the ability
to assign different native ports to different multi-UOSes. For
example:
1-2,1-2 assigned to UOS-1.
1-1,2-1 assigned to UOS-2.
Change-Id: I899070f7a8a6eb23179e41e7b1f1da24c52482b2
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
New USB APIs:
usb_native_is_bus_existed/usb_native_is_port_existed: Check if specific
usb bus or port are valid or not.
usb_native_is_ss_port: Check if the specific port is supper speed usb port.
Change-Id: I9ab54f6e81742321128d6abd5845ef966f0e9f37
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Implements the disconnect callback of libusb which will be called once
USB device plug out.
Change-Id: Ic5f072f08a92270e6e5836b49e5066da783af243
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Support USB mouse, USB keyboard and USB flash drive by enabling the
USB bulk and interrupt transfer for port mapper.
Change-Id: Ia202729e0cfb26fb44a6b278cf4306f2b0b6fa36
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the port change event related function, it
triggered when USB device be hot plugged in.
Change-Id: I065c1e93779f85f8ee6031960e129b59146e1bb7
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the control transfer for port mapper. With this
patch, USB2.0 device can be enumerated successfully in user OS.
Change-Id: I567bd00ca310d68375acd94a5cc5bcd287665df1
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Allocate an emulated USB instance in connect callback function. This
instance is the entity of virtual USB device which will be enumerated
by the UOS.
Change-Id: I948d2ce9eca7e9d5bbab673f2505efc0a03c03b4
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Introduce the struct usb_dev which is used to abstract the physical USB
devices. And APIs for external call are also provided.
Change-Id: Ia25d52a6c670040da787f82b3bea34eee9f3d04d
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change the DPRINTF macro to UPRINTF for USB subsystem. The
UPRINTF will print log according to certain log level.
Change-Id: I5db8813357c9f684c25f23650e7c914f9063f842
Signed-off-by: Wu, Xiaoguang <xiaoguang.wu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Full logic to supprot vRPMB:
1. Automatic switch between physical or simulated RPMB.
But hardcode to use simulated one.
2. Parse RPMB cmd to basic APIs to:
2.1 check request frame HMAC with uos vkey
2.2 replace RPMB frame with real values.
3. RPMB partitioning for multiple UOS.
It's hardcoded for coming config file support.
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Du Min <minx.du@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
Create file as simulated RPMB storage for pre-production usage.
Add RPMB APIs to emulate behavior of physical RPMB controllor.
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Du Min <minx.du@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
This patch implements virtio rpmb backend VBS-U component,
it includes the basic module interface with DM. This
component will work with vRPMB FE driver together to
provide one communication channel between UOS and SOS.
Signed-off-by: weideng <wei.a.deng@intel.com>
Signed-off-by: yingbinx <yingbinx.zeng@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
suspicious dereference of pointer 'fi->fi_devi'
by passing it to function 'pci_emul_free_bars()'
before NULL check.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This commit is reported to cause UOS reboot fail becasue the
pci_businfo[] only be allocated when calling pci_parse_slot
in dm initialization while UOS reboot will not allocate again.
So we can't free it here.
This reverts commit 7aaff68798.
Signed-off-by: Jie Deng <jie.deng@intel.com>
Entries of pci_businfo[] allocated in function "pci_parse_slot"
using calloc need to be freed when deinit.
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Right now, the virtio_heci_proc_rx only process the first
available client at a time, then clear rx_need_sched flag to make
rx_thread sleep. It cause the remain data available clients lost the
current change to be processed. This patch resolves this issue, to
process all data available clients in a round prior to push rx_thread
enter sleep.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With rare probability, the two threads may try to get&put client
together. For client getting, the subsequent thread will get one
destroyed client. For client putting, it will cause acrn-dm get crashed
due to assert be triggered in virtio_heci_client_put.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The original code assume there is only one configuration for
virtio-blk, and 'b' is just located after that configuration,
so to get the value of 'b', it will end char *config by adding
'\0' after the first configuration.
Thus, char *config will change from:
/XXXX_vdisk_file,range=xxx/xxx
to:
/XXXX_vdisk_file
and char *b will point to:
range=xxx/xxx
So, the range will never take effect for virtio-blk.
Now, 'b' is designed to located just after emul, and
char *config will point to all configurations after 'b'.
Note: only ",b," is taken for boot device option.
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All related resources are freed in virtio_input_deinit.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The implementation of virtio_input_get_config is based on ioctl of
evdev fd. The following properties of input device are got by ioctl
to service configuation request from FE driver:
- name and devids
- propbit
- evbit: keybit/relbit/absbit/mscbit/swbit
- absbit
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Input events are read from host evdev fd and cached into a local queue.
When SYN_REPORT is read, the cached input events are sent to guest via
EVENT virtqueue. Guest input events are read from STATUS virtqueue then
written to host evdev fd.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the callbacks required by virtio_input_ops:
reset/cfgread/cfgwrite/apply_features/set_status.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The following are done in virtio_input_init:
- parse the command line to get the path of host evdev
- parse the command line to get the optional serial string
- calloc struct virtio_input and initialize it
- call virtio framework APIs to initialize virtio PCI
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the data structures and macros used to implement
virtio-input.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Following functions have never been used anywhere.
Let's remove them.
fbsdrun_muxed()
fbsdrun_vmexit_on_hlt()
fbsdrun_vmexit_on_pause()
fbsdrun_disable_x2apic()
Remove weird prefix "fbsdrun" from following functions' name.
fbsdrun_virtio_msix() --> virtio_uses_msix()
fbsdrun_start_thread() --> start_thread()
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If guest doesn't initialize the net device, the tx thread will
block at the first tx_cond wait. When virtio_net_tx_stop is
invoked, the tx_thread will block on second tx_cond then.
Check whether we should exit tx_thread after first tx_cond
waiting
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to avoid system resource/memory leaked when guest os reboot.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If multiple ports are defined in the command line, is_console is
not set to a correct value for non-console ports when the definition
of this non-console port is following the definition of a console port.
For example in below definition, the second port is configured as
console port which is not correct:
-s 5,virtio-console,@pty:pty_port,file:file_port=/home/root/test1
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Two memory ranges are allocated:
- PCI ECFG
- PCI hole
They should be released when deinit_pci. Old code mark
this two ranges not unregistered. Which is wrong for
warm reboot case. Make them could be unregistered.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When doing warm reboot, the mevent module will not be deinitialized.
We need to delete all mevent registered while deinit virutal device.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Also refine the failure path of lpc_init to make sure all
resources allocated get release.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add deinit function for uart.
Another work is add resource cleanup functions which is called
by other components when they are using uart.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Unlike kqueue/kevent of BSD, the epoll of Linux could be
add/del by using different API on the fly.
This patch drops the notify used by mevent_add/del and
call epoll_ctl to add/delete target fd. Only keeps
global_head to track mevent added and makes the code
logic in mevent_dispatch() a littel bit simpler.
Another thing is related with epoll_ctl. If the target
fd is regular fd which doesn't support epoll, epoll_ctl
will return -1. When DM is start by systemd, the STDIO
is not mapped to terminal, epoll_ctl on STDIO could
return -1. Which block UOS boot. We only call mevent_add
after confirm STDIO is mapped to terminal.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are two build issues:
- add -fno-strict-aliasing to address
error: dereferencing type-punned pointer will break strict-aliasing rules
- initialize tfd to zero to address
error: ‘tfd’ may be used uninitialized in this function
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
This reverts commit bc0579d0ff.
The commit bc0579d makes acrn-dm crashed when launch UOS.
Crash log:
./launch_UOS.sh: line 112: 377 Segmentation fault (core dumped) acrn-dm ...
dmesg log:
acrn-dm[1264]: segfault at 1f0 ip 0000000000412257 sp 00007fffc1af9920 error 6 in acrn-dm[400000+3d000]
After this patch reverted, UOS launched successfully.
Firmware need to disconnect the client connection when host's message
overlow the receive buffer in firmware. We emulate this behavior in
backend service.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we treat a read/write ENODEV error as a firmware reset. When MEI
reset happens in driver, we need disconnect all active clients and
restart HBM flow.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
HECI Bus Message is important for HECI clients communication. They use
HBM for connect, disconnect, get property and so on. In backend service,
we need do some emulation for HBM as we are running on top of native
MEI driver.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Li Hao <hao.l.li@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Zhao, Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Huang, Yang