This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build
Tracked-On: #3482
Signed-off-by: Terry Zou <terry.zou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN now has unified the way to handle SBL and UEFI.
so just remove corresponding macros in Kconfig.
BTW, default configuration in Kconfig is for UEFI boards.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Combination of BOARD and FIRMWARE is a more precious definition.
And we decide PLATFORM_XXX based on FIRMWARE, remove relative one in
board config.
We reserve PLATFORM for backward compatibility.
Tracked-On: #1995
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Yin Fengwei < fengwei.yin@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Currently silentoldconfig uses the default values in Kconfig when .config does
not exist or is for a different platform from the one specified in command line
options. This makes it impossible to leverage defconfigs when a simple 'make' is
invoked to build the hypervisor, as 'make' calls oldconfig instead of defconfig
for creating a configuration file.
With DEFCONFIG_LIST in Kconfig, now silentoldconfig is also able to know which
defconfig is appropriate given the specified board. This patch changes the
behavior of oldsilentconfig as follows.
1. When an old .config for the given board exists, the script updates the
.config per configurations specified from the command line. Instead of
manually resetting all symbols, the script now relies on Kconfiglib's
internal logic to automatically update invisible symbols after symbol
value changes.
2. When an old .config does not exist or is not for the specified board, the
defconfig for that board is used as base line and further tweaked per
configurations from the command line.
v3 -> v4:
* Rephrase comments in silentoldconfig.py.
v2 -> v3:
* Keep backward compatibility of silentoldconfig.py since vmcfg also uses the
script.
v1 -> v2:
* Include .config when it is edited manually so that new configurations
overwritten the old (in the outdated config.mk).
* Compare the board in .config with the one in the defconfig instead of what is
specified in the environment variable BOARD, as defconfig and BOARD may use
different names (e.g. aliases or different cases)
Tracked-On: #1588
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
The current defconfigs are BIOS-specific which makes it difficult to maintain
multiple defconfigs for boards running the same BIOS.
This patch re-organizes the defconfigs to be board-specific. A command line
option BOARD is introduced to specify a board on which the current build targets
at. The original PLATFORM is kept for backward compatibility which redirects to
apl-mrb and nuc6cayh for sbl and uefi, respectively.
The getting started guide is also updated accordingly.
v1 -> v2:
* Rewrite 'up2' to 'UP2'.
Tracked-On: #1588
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Without any command under the .config target, config.mk will not be remade in
the same execution of make after oldconfig changes .config. This can result to
inconsistency between .config and the built image right after .config is
changed.
Tracked-On: #1588
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
It is faster to check the existance of a certain library by trying importing
that library, instead of invoking pip3 for a complete list of installed
libraries. Time of the check can be significantly reduced.
# time pip3 list
...
real 0m6.038s
user 0m0.652s
sys 0m0.036s
# time python3 -c "import kconfiglib"
real 0m0.037s
user 0m0.036s
sys 0m0.000s
Tracked-On: #1588
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Use genld.sh instead of config.h to generate link_ram.ld.
It can avoid the conflicts of the syntax between ld script and
C.
V1->V2:
change the deps name to config,
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
reviewed-by: Junjie Mao <junjie.mao@intel.com>
... following the naming convention of Linux kbuild.
v1 -> v2:
* Introduced.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
This patch introduces a configuration symbol RELEASE for managing debug/release
build in a similar way to how we manage PLATFORM.
Note:
1. 'make defconfig RELEASE=1' will still use the CONFIG_RELEASE defined in the
default configuration. The 'RELEASE=1' option has no effect in this case.
2. 'make RELEASE=1' is backward-compatible and enforces a release version to be
built.
v1 -> v2:
* Pass RELEASE instead of CONFIG_RELEASE to silentoldconfig.py to avoid
unintended overriding of the value.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
Since .config has PLATFORM now, it is expected that the PLATFORM= command line
option is no longer necessary as long as a proper .config exists.
This patch implements this expectation. Now the platform to be selected is
determined by the following steps.
1. If PLATFORM= is provided on the command line, the specified value is
used.
2. If there is no PLATFORM= on the command line and PLATFORM is defined in
config.mk, its value is used.
3. If neither PLATFORM= on the command line nor config.mk is available, a
predefined default value is used.
v1 -> v2:
* 'make oldconfig' should not pass CONFIG_xxx to the script since config.mk
can be out-dated.
* Change the default value of PLATFORM to SBL for backward compatibility of
'make all'.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
This patch enables 'make menuconfig' leveraging the menuconfig.py in kconfiglib,
which shows a TUI for modifying the current configurations.
Menuconfig.py is python3 only, and thus the existence of 'python3' instead of
'python' is checked and python3 is used to run all the scripts.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
The current implementation of the check_dep_* macros always append the
prerequisite checking target to BUILD_DEPS, but there are some cases when some
prerequisites are only necessary for some specific targets instead of general
builds.
This patch adds a second parameter to the check_dep_* macros specifying which
variable the generated target should be appended to.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
Makefile takes all double quotes in variable definitions literally. Thus with
the following definition:
FOO := "a"
expanding FOO in a file path results the following (which is invalid):
SRC += a/b/${FOO}.c --> SRC += a/b/"a".c
To avoid such issues, this patch drops the double quotes at the beginning and
end of the definition of symbols with string type.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
Before checking any given target, make has an additional phase to check if any
included makefile should be updated. This patch enforces running oldconfig in
this phase to update .config and config.mk (if necessary). This ensures that
make gets the correct configurations when executing the given target.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
This patch drops "#include <bsp_cfg.h>" and include the generated config.h in
CFLAGS for the configuration data.
Also make sure that all configuration data have the 'CONFIG_' prefix.
v4 -> v5:
* No changes.
v3 -> v4:
* Add '-include config.h' to hypervisor/bsp/uefi/efi/Makefile.
* Update comments mentioning bsp_cfg.h.
v2 -> v3:
* Include config.h on the command line instead of in any header or source to
avoid including config.h multiple times.
* Add config.h as an additional dependency for source compilation.
v1 -> v2:
* No changes.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
This patch implements the following targets as an includable .mk to the make
system of the hypervisor.
make defconfig PLATFORM=xx:
force (re)generating the default configuration for xx
make oldconfig PLATFORM=xx:
generate a configuration for platform xx based on .config if available
make minimalconfig
save a minimized .config to defconfig
The default target (make all) will generate a default configuration if no
.config is available.
The values defined in .config are available in the toplevel Makefile after
kconfig/kconfig.mk is included.
v4 -> v5:
* Add minimalconfig for generating default configs.
v3 -> v4:
* No changes.
v2 -> v3:
* "make defconfig" now correctly overwrite an existing .config.
* Add short descriptions on where each target is supposed to be used.
v1 -> v2:
* Add proper dependency checks in the Makefile of hypervisor.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Terry Zou