When guest kernel has multiple loading segments like ELF format image, just
define one load address in sw_kernel_info struct is meaningless.
The patch removes kernel_load_addr member in struct sw_kernel_info, the load
address should be parsed in each specified format image processing.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The previous code did not load bzImage start from protected mode part, result
in the protected mode part un-align with kernel_alignment field and then cause
kernel decompression start from a later aligned address. In this case we had
to enlarge the needed size of bzImage kernel to kernel_init_size plus double
size of kernel_alignment.
With loading issue of bzImage protected mode part fixed, the kernel needed size
is corrected in this patch.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
When LaaG boots with bzImage module file, only protected mode code need
to be loaded to guest space since the VM will boot from protected mode
directly. Futhermore, per Linux boot protocol the protected mode code
better to be aligned with kernel_alignment field in zeropage, otherwise
kernel will take time to do "rep movs" to the aligned address.
In previous code, the bzImage is loaded to the address where aligned with
kernel_alignment, this would make the protected mode code unalign with
kernel_alignment. If the kernel is configured with CONFIG_RELOCATABLE=n,
the guest would not boot. This patch fixed this issue.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch moves get_bzimage_kernel_load_addr() from init_vm_sw_load() to
vm_sw_loader() stage so will set kernel load address of bzImage type kernel
in vm_bzimage_loader() in vm_load.c.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch moves get_initrd_load_addr() API from init_vm_sw_load() to
vm_sw_loader() stage. The patch assumes that the kernel image have been
loaded to guest space already.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
In load_sw_modules() implementation, we always assuming the guest kernel
module has one load address and then the whole kernel image would be loaded
to guest space from its load address. This is not true when guest kernel
has multiple load addresses like ELF format kernel image.
This patch removes load_sw_modules() API, and the loading method of each
format of kernel image could be specified in prepare_loading_xxximage() API.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
As the previous commit said the kernel load address should be moved
from init_vm_sw_load() to vm_sw_loader() stage. This patch refines
the API of get_bzimage_kernel_load_addr() in init_vm_kernel_info()
for later use.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Currently the guest kernel load address and ramdisk load address are
initialized during init_vm_sw_load() stage, this is meaningless when
guest kernel has multiple segments with different loading addresses.
In that case, the kernel load addresses should be parsed and loaded
in vm_sw_loader() stage, the ramdisk load address should be set in
that stage also because it is depended on kernel load address.
This patch refines the API of get_initrd_load_addr() which will set
proper initrd load address of bzImage type kernel for later use.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
According to PCIe Spec, for a RW register bits, If the optional feature
that is associated with the bits is not implemented, the bits are permitted
to be hardwired to 0b. However Zephyr would use INTx Line Register as writable
even this PCI device has no INTx, so emulate INTx Line Register as writable.
Tracked-On: #6330
Signed-off-by: Fei Li <fei1.li@intel.com>
There're some virtual platform which doesn't meet this constraint. So remove
this constraint.
Tracked-On: #6329
Signed-off-by: Fei Li <fei1.li@intel.com>
Update generic_board/generic_code folder with compile result
on the nuc11tnbi5 platform.
Tracked-On: #6292
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
config editor creates the default scenario xmls and launch xmls
based on generic configs when users import a new board.
Tracked-On: #6208
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
for core partition VM (like RTVM), PMC is always used for performance
profiling / tuning, so expose PMC capability and pass-through its MSRs
to the VM.
Tracked-On: #6307
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
if one array just used in local only, and its size not used extern,
use ARRAY_SIZE macro to calculate its size.
Tracked-On: #6307
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
add interface to save scenario xmls and launch xmls to user defined
path in config editor; move all config xmls and generated scripts
out of acrn-hypervisor.
Tracked-On: #6208
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
In some scenarios (e.g., nested) where lapic-pt is enabled for a vcpu
running on a pcpu hosting console timer, the hv console will be
inaccessible.
This patch adds the console callback to every VM-exit event so that the
console can still be somewhat functional under such circumstance.
Since this is VM-exit driven, the VM-exit/second can be low in certain
cases (e.g., idle or running stress workload). In extreme cases where
the guest panics/hangs, there will be no VM-exits at all.
In most cases, the shell is laggy but functional (probably enough for
debugging purpose).
Tracked-On: #6312
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
For an atomic operation using bus locking, it would generate LOCK# bus
signal, if it has Non-WB memory operand. This is an UC lock. It will
ruin the RT behavior of the system.
If MSR_IA32_CORE_CAPABILITIES[bit4] is 1, then CPU can trigger #GP
for instructions which cause UC lock. This feature is controlled by
MSR_TEST_CTL[bit28].
This patch enables #GP for guest UC lock.
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Because the emulation code is for both split-lock and uc-lock,
rename splitlock.c/splitlock.h to lock_instr_emul.c/lock_instr_emul.h
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Because the emulation code is for both split-lock and uc-lock, Changed
these API names:
vcpu_kick_splitlock_emulation() -> vcpu_kick_lock_instr_emulation()
vcpu_complete_splitlock_emulation() -> vcpu_complete_lock_instr_emulation()
emulate_splitlock() -> emulate_lock_instr()
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Split-lock emulation can be re-used for uc-lock. In emulate_splitlock(),
it only work if this vmexit is for #AC trap and guest do not handle
split-lock and HV enable #AC for splitlock.
Add another condition to let emulate_splitlock() also work for #GP trap
and guest do not handle uc-lock and HV enable #GP for uc-lock.
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When ACRN uses decode_instruction to emulate split-lock/uc-lock
instruction, It is actually a try-decode to see if it is XCHG.
If the instruction is XCHG instruction, ACRN must emulate it
(inject #PF if it is triggered) with peer VCPUs paused, and advance
the guest IP. If the instruction is a LOCK prefixed instruction
with accessing the UC memory, ACRN Halted the peer VCPUs, and
advance the IP to skip the LOCK prefix, and then let the VCPU
Executes one instruction by enabling IRQ Windows vm-exit. For
other cases, ACRN injects the exception back to VCPU without
emulating it.
So change the API to decode_instruction(vcpu, bool full_decode),
when full_decode is true, the API does same thing as before. When
full_decode is false, the different is if decode_instruction() meet unknown
instruction, will keep return = -1 and do not inject #UD. We can use
this to distinguish that an #UD has been skipped, and need inject #AC/#GP back.
Tracked-On: #6299
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
While running in a nested environment, such as qemu, parse the board
information should be allowed even it is not in a native environment.
Replace the error with warning message and does not exit the program.
Tracked-On: #6208
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Enlarge the max size to store the PTCT/RTCT table to 1k bytes
because the size of RTCT table exceeded the original max size
0x1100 - 0xF00 which makes RTCT table overlap other ACPI tables.
Tracked-On: #6303
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
1. Update the vaule of the tag CLOS_MASK to 0xfffff according to board.xml
in all scenario xml files.
2. Replace industry_launch_2uos.xml launch file with industry_launch_6uos.xml.
3. Update logical_partition.xml file.
4. Remove hybrid_rt.xml file, then add a second POST_STD_VM in hybrid.xml and
add hybrid_launch_2uos.xml launch file correspondingly.
Tracked-On: #6244
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Add the MSI-X capability structure nodes under <capability
id="MSI-X"> in board.xml.
Example:
<capability id="MSI-X">
<table_size>16</table_size>
<table_bir>1</table_bir>
<table_offset>0x1000000</table_offset>
<pba_bir>1</pba_bir>
<pba_offset>0x0</pba_offset>
</capability>
Fix the MSI <count> nodes when there is only one vector.
Tracked-On: #6235
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
The PR 6236 has modified the board.xml format for MAX_MSIX_TABLE_NUM fix.
To compromise this PR, updates all the source file board.xmls.
Tracked-On: #6235
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
To add brakets for '(char *)(ptr)' in MACRO
container_of(), which may be used recursively.
Tracked-On: #6284
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Common structures are used by DM, kernel, HV. Aligned attribute might
caused structures size mismatch between DM/HV and kernel, as kernel uses
default GCC alignment.
So, make DM/HV also use the default GCC alignment.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
vm_config size can be calced by platform_info.sw.max_vms *
platform_info.sw.vm_config_size.
Change vm_get_config() to call IOCTL ACRN_IOCTL_GET_PLATFORM_INFO
twice, first to get platform_info, second to get the vm_configs
content.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ADD_HV_VDEV -> ACRN_IOCTL_CREATE_VDEV
IC_REMOVE_HV_VDEV -> ACRN_IOCTL_DESTROY_VDEV
struct acrn_emul_dev -> struct acrn_vdev
Also, move struct acrn_vdev to acrn_common.h as this structure is used
by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_MMIODEV -> ACRN_IOCTL_ASSIGN_MMIODEV
IC_DEASSIGN_MMIODEV -> ACRN_IOCTL_DEASSIGN_MMIODEV
struct acrn_mmiodev has slight change. Move struct acrn_mmiodev into
acrn_common.h because it is used by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_PCIDEV -> ACRN_IOCTL_ASSIGN_PCIDEV
IC_DEASSIGN_PCIDEV -> ACRN_IOCTL_DEASSIGN_PCIDEV
QUIRK_PTDEV -> ACRN_PTDEV_QUIRK_ASSIGN
struct acrn_assign_pcidev -> struct acrn_pcidev
Move struct acrn_pcidev into acrn_common.h because it is used by both
DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Victor Sun