-- use an array to fast locate the hypercall handler
to replace switch case.
-- uniform hypercall handler as below:
int32_t (*handler)(sos_vm, target_vm, param1, param2)
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
1. improve makefile to avoid duplicated build libs when make
in acrn-hypervisor/hypervisor directory to build HV only.
2. for debug/release library just select one makefile to build
Tracked-On: #2412
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Move CFG read/write function for PCI-compatible Configuration Mechanism from
debug/uartuart16550.c to hw/pci.c and rename CFG read/write function for
PCI-compatible Configuration Mechanism to pci_pio_read/write_cfg to align with
CFG read/write function pci_mmcfg_read/write_cfg for PCI Express Enhanced
Configuration Access Mechanism.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Use Enhanced Configuration Access Mechanism (MMIO) instead of PCI-compatible
Configuration Mechanism (IO port) to access PCIe Configuration Space
PCI-compatible Configuration Mechanism (IO port) access is used for UART in
debug version.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Enable uart as early as possible to make things easier for debugging.
After this we could use printf to output information to the uart. As for
pr_xxx APIs, they start to work when init_logmsg is called.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The sbuf is allocated for each pcpu by hypercall from SOS. Before launch
Guest OS, the script will offline cpus, which will trigger vcpu reset and
then reset sbuf pointer. But sbuf only initiate once by SOS, so these
cpus for Guest OS has no sbuf to use. Thus, when run 'acrntrace' on SOS,
there is no trace data for Guest OS.
To fix the issue, only reset the sbuf for SOS.
Tracked-On: #3335
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
there is a build error if we only build debug/release library
because missing the build/modules folder
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
modified: Makefile
modified: debug/Makefile
modified: release/Makefile
As there is a requirement for conmunication between VMs on uart port,
but for Pre-launched VM, the only way is to create vuart for each VM and
connect them at hypervisor side. So, the vuart code should be moved from
/debug to /dm so that they can also be used in release version.
For the console related code, as no need to support in release version,
so leave them at debug directory.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In previous code, only for pre-launched VM, hypervisor would create
vuart console for each VM. But for post-launched VM, no vuart is
created.
In this patch, create vuart according to configuration in structure
acrn_vm_config. As the new configuration is set for pre-launched VM and
post-launched VM, and the vuart initialize process is common for each
VM, so, remove CONFIG_PARTITION_MODE from vuart related code.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When shutting down SOS VM, the shared sbuf is released from guest OS, but
the per cpu sbuf pointers in hypervisor keep inact. This creates a problem
that after SOS is re-launched, hypervisor could write to the shared
buffer that no longer exists.
This patch implements sbuf_reset() and call it from reset_vcpu() to
reset sbuf pointers.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Change the type from uint8_t to uint32_t for shell and vuart
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move the debug related command handle into debug/dbg_cmd.c;
so release build will not include that.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add an API to support vuart COM base and irq configured;
2. add the HV cmd to be parsed for vuart COM base & irq.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move CONFIG_COM_IRQ code into vuart, because it is just
used for vuart.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vuart it used for SOS to output log to HV console,
so if dbg uart is disabled, it need be disabled too:
just unregister its PIO.
Tracked-On: 2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes incorrect vm_id captured when sampling PMU data. Currently,
the vm_id gets attributed to ACRN hypervisor, rather than actual guest vm_id.
The issue is identified that the existing code captures the guest vm info
after vmexit_hander function is completed, in which the profiling module
points its context to VMM. When the vmexit happens by PMI, the guest context
should be captured so that the attribution to proper guest vm can happen.
This change will also allow to capture more accurate TSC when vmexit happens.
Tracked-On: #2043
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch does:
- remove the unused API declaration
- fix use of uninitialized variable in instr_emul.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
serial PCI device is just used for HV/SOS output debug information;
because it is used in hypervisor layer, SOS should not touch it.
so need to check and hide it from SOS.
Tracked-On: #1923
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
seperate the function definitions into debug/release directories
to better distinguish debug/release libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enhance Makefile to compile debug/release into 2 libraries
v1 -> v2:
* auto make all the libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
remove the usage of HV_DEBUG in hypercall.c and vmcall.c
TO-DO:
Enhance Makefile to compile debug/release into 2 libraries
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Mingqiang Chi