On a PCI type HV uart, the bdf value is in a union together with
mmio_base_vaddr, then the value would be overridden by mmio_base_addr
in uart16550_init(), result in is_pci_dbg_uart() returns a wrong value
and then uart hang.
Tracked-On: #5288
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
BDF string can be parsed by the configuration tool. A 16bit WORD value with
format (B:8, D:5, F:3) can be passed from configuration to the
hypervisor directly to save some BDF string parse code.
Tracked-On: #4937
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
New board, EHL CRB, does not have legacy port IO UART. Even the PCI UART
are not work due to BIOS's bug workaround(the BARs on LPSS PCI are reset
after BIOS hand over control to OS). For ACRN console usage, expose the
debug UART via ACPI PnP device (access by MMIO) and add support in
hypervisor debug code.
Another special thing is that register width of UART of EHL CRB is
1byte. Introduce reg_width for each struct console_uart.
Tracked-On: #4937
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
replace spinlock_obtain/spinlock_release with spinlock_irqsave_obtain
and spinlock_irqrestore_release to avoid dead lock for uart module.
this uart lock may be accessed in ISR context like this path:
dispatch_interrupt->pr_err/pr_xxx or printf
->console_write->uart16550_puts
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Move CFG read/write function for PCI-compatible Configuration Mechanism from
debug/uartuart16550.c to hw/pci.c and rename CFG read/write function for
PCI-compatible Configuration Mechanism to pci_pio_read/write_cfg to align with
CFG read/write function pci_mmcfg_read/write_cfg for PCI Express Enhanced
Configuration Access Mechanism.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Use Enhanced Configuration Access Mechanism (MMIO) instead of PCI-compatible
Configuration Mechanism (IO port) to access PCIe Configuration Space
PCI-compatible Configuration Mechanism (IO port) access is used for UART in
debug version.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
When need hpa and hva translation before init_paging, we need hpa2hva_early and
hva2hpa_early since init_paging may modify hva2hpa to not be identical mapping.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Enable uart as early as possible to make things easier for debugging.
After this we could use printf to output information to the uart. As for
pr_xxx APIs, they start to work when init_logmsg is called.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Now if the uart is mapped to a PIO address space, the uart base address is a physical
PIO address; if it's mapped to a MMIO address space, the uart base address is a
virtual MMIO address. Add union uart_addr structure to imply this.
And define a console_uart structure to add all uart related fields into this structure.
Tracked-On: #2987
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
strncpy_s(d, dmax, s, slen): the 'dmax' includes the null terminator, while
slen doesn't. Thus if (dmax == slen == strlen(s)), strncpy_s() chooses to
discard the last character from s and instead write '\0' to d[dmax - 1].
strnlen_s(s, maxsize): if there is no terminating null character in the
first maxsize characters pointed to by s, strnlen_s() returns maxsize.
So in the following example or similar cases, we need to increase the size
of d[] by 1 to accommodate the null terminator, and add '1' to the dmax
argument to strncpy_s().
uint8_t d[MAX_LEN];
size = strnlen_s(s, MAX_LEN);
strncpy_s(d, MAX_LEN, s, size);
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
--move several uart API declarations from console.h to uart16550.h
--move several shell API declarations from console.h to shell.h
--add dbg_cmd.h, move 'handle_dbg_cmd' declaration from console.h
to dbg_cmd.h
--move debug/uart16550.h to include/debug/uart16550.h since some
uart APIs will be called by external files
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
modified: arch/x86/guest/vm.c
modified: arch/x86/init.c
modified: bsp/uefi/cmdline.c
modified: debug/console.c
modified: debug/dbg_cmd.c
modified: debug/uart16550.c
modified: debug/vuart.c
modified: hw/pci.c
modified: include/arch/x86/multiboot.h
modified: include/debug/console.h
new file: include/debug/dbg_cmd.h
new file: include/debug/shell.h
renamed: debug/uart16550.h -> include/debug/uart16550.h
vuart it used for SOS to output log to HV console,
so if dbg uart is disabled, it need be disabled too:
just unregister its PIO.
Tracked-On: 2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now PCI uart changed from MMIO configure to BDF configure,
it need change this interface too; this interface is used
to dynamically configure debug uart by HV command line.
Tracked-On: #2031
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
before PCI_BDF uses its hex value like "0xC2" for "0:18.2" to
configure, now use "0:18.2" directly to make it more readable
and easier to configure.
Tracked-On: #2031
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
With SMAP enabled, hypervisor can't access pages that
owned by guest(either SOS or UOS), and an override is
is provided: stac()/clac() to enable/disable access to
guest's memory pages.
Pre-conditon:
Mark hypervisor owned pages as supervisor mode (U/S = 0),
and set all othter memory pages as user mode (U/S = 1).
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
serial PCI device is just used for HV/SOS output debug information;
because it is used in hypervisor layer, SOS should not touch it.
so need to check and hide it from SOS.
Tracked-On: #1923
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace serial PCI MMIO base address configure with its BDF configure.
Tracked-On: #1923
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch allows to disable the serial port directly from Kconfig. This used
to only be possible from the command-line (by passing "uart=disabled"). To
disable the serial port via Kconfig, simply unselect the "Serial IO type"
option.
The default options do not seem to have any effect anymore (and were confusing
anyway) so they are removed and the serial port is enabled for various platforms
in their corresponding *.config file.
Tracked-On: #1481
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The printf related functions have been called by other various
functions, e.g. get_ptdev_info(), get_ioapic_info, etc. The patch
is used to clear up the usage.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRAC has requirement about implict conversion: actual to formal
param. This patch is used to fix part of these violations.
1.Add a new structure seg_desc_vmcs to hold the VMCS field address of
segment selector to clean up seg_desc structure.
2.Add the definition of maximum MSI entry and the relevant judgement.
3.The violations in shell.c, logmsg.c will be fixed in other series of
patches with modification of function snprintf(), vsnprintf() and other
related usages.
v1->v2:
*Move the definition of struct seg_desc_vmcs from instr_emul.h to
instr_emul.c.
*Modify the formal parameter type in function definition from uint8_t
to char instead of using cast.
*Drop the const declaration for char data in formal parameter.
v2->v3:
*update the data missing conversion.
*change type of internal parameter len to avoid casting in npklog.c.
*change the conversion from signed char to unsigned int in
uart16550_getc() to solve sign-extension.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Check uart enabled flag, it will return if the flag is false.
-- Add function declaration (uart16550_set_property) in console.h
-- Remove unnecessary function declaration(get_serial_handle)
-- Change uart_enabled and port_mapped to bool
-- Fix MISRA-C integer violations
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current hierarchy :
CONSOLE --> SERIAL -->UART DRIVER
This patch remove SERIAL layer, that is console will
call UART driver directly, change it to:
CONSOLE --> UART DRIVER
Remove some related data structures and registration and callback.
Cleanup vuart.c
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the function scope,the parameter should not be
changed as Misra required.
V1->V2 recover some violations because of ldra's false positive.
V2->V3 sync local variable' type to parameter's type with the prefix of const.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are many type conversions in the atomic
operations invoking reported by static analysis tool. These
type conversions voilate MISRA C.
To keep uniform naming convention, rename atomic operation
function names:
atomic_set_int/long --> atomic_set32/64;
atomic_clear_int/long --> atomic_clear32/64;
atomic_load --> atomic_load32;
atomic_store --> atomic_store32;
atomic_swap --> atomic_swap32;
atomic_readandclear --> atomic_readandclear32;
atomic_inc --> atomic_inc32;
atomic_dec --> atomic_dec32;
atomic_cmpxchg --> atomic_cmpxchg32;
atomic_xadd --> atomic_xadd32.
Update the type of atomic_load32/64, atomic_store32/64,
atomic_swap32/64, atomic_cmpxchg32/6.
Update related variables and callers.
Note: the type of return value and parameters of atomic_xadd32/64
still keep signed int/long since caller pass
negative variable to atomic_xadd32/64;
V1-->V2:
Add comments for atomic_set/clear to differ from
bitmap_set/clear.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: Junjie.Mao <junjie.mao@intel.com>
1) Change these 5 APIs to void type:
vcpu_inject_pf
uart16550_calc_baud_div
uart16550_set_baud_rate
console_init
ptdev_activate_entry
No need to return 'entry' for ptdev_activate_entry
since the input parameter is 'entry'.
2) no need to check return value for the caller
such as sbuf_put/console_putc/serial_puts/serial_get_rx_data
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
To prevent the value is devided by zero, checks the denominator
before the calculation. Adding the if statement to check before use.
If the baud_rate is equal to zero, using default baud_rate.
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.Change the API tgt_uart/ static int uart16550_get_rx_err(uint32_t rx_data) to return uint32_t
b.modified the format of if from "if (length > 32*(length/32))" to
"if (length % 32U > 0)"
V3->V4:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
According to the comments in hypervisor:
" This file includes config header file "bsp_cfg.h" and other
hypervisor used header files.
It should be included in all the source files."
this patch includes all common header files in hypervisor.h
then removes other redundant inclusions
Signed-off-by: Zide Chen <zide.chen@intel.com>
rename atomic_cmpxchg_int to atomic_cmpxchg
replace atomic_cmpset_long with atomic_cmpxchg64
rename atomic_readandclear_long to atomic_readandclear64
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
1. vpic_wire_mode no need to atomically set its value.
2. uart open conut want to atomically set its value not atomically set
its bits.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Before referencing to physical address of devs such as lapic, ioapic,
vtd, and uart, switch to virtual address.
Use a phisical address of pml4 to write CR3.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
remove data defination of mmio_addr_t, vaddr_t, paddr_t,
and ioport_t.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Victor Sun