BVT schedule rule:
When a new thread is wakeup and added to runqueue, it will get the
smallest avt (svt) from runqueue to initiate its avt. If the svt is
smaller than it's avt, it will keep the original avt. With the svt, it
can prevent a thread from claiming an excessive share of CPU after
sleepting for a long time.
For the reboot issue, when the VM is reboot, it means a new vcpu thread
is wakeup, but at this time, the Service VM's vcpu thread is blocked,
and removed from the runqueue, and the runqueue is empty, so the svt is
0. The new vcpu thread will get avt=0. avt=0 means very high priority,
and can run for a very long time until it catch up with other thread's
avt in runqueue.
At this time, when Service VM's vcpu thread wakeup, it will check the
svt, but the svt is very small, so will not update it's avt according to
the rule, thus has a very low priority and cannot be scheduled.
To fix it, update svt in pick_next handler to make sure svt is align
with the avt of the first obj in runqueue.
Tracked-On: #7944
Signed-off-by: Conghui <conghui.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
This function is registered as PCI MMIO configuration
access handler, which processes PCI configuration access
request from ACRN guest hence the inputs shall be validated
to avoid potential hypervisor crash when handling inputs
from malicious guests.
Tracked-On: #7902
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. make memcpy_erms as a public API; add a new one
memcpy_erms_backwards, which supports to copy data from tail to head.
2. improve to use right/left/home/end key to move cursor, and support
delete/backspace key to modify current input command.
Tracked-On: #7931
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. buffer history commands.
2. support up/down key to select history buffered commands
Tracked-On: #7931
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When LAPIC timer is working in oneshot or periodic mode, OS uses
initial counter register/current counter register to program
a timer. Both initial counter and current counter depend on the
LAPIC frequency. ACRN emulated vLAPIC timer based on the TSC.
vLAPIC freq is the same as TSC freq.
Tracked-On: #7876
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
For platform that supports RRSBA (Restricted Return Stack Buffer
Alternate), using retpoline may not be sufficient to guard against branch
history injection or intra-mode branch target injection. RRSBA must
be disabled to prevent CPUs from using alternate predictors for RETs.
Quoting Intel CVE-2022-0001/CVE-2022-0002:
Where software is using retpoline as a mitigation for BHI or intra-mode BTI,
and the processor both enumerates RRSBA and enumerates RRSBA_DIS controls,
it should disable this behavior.
...
Software using retpoline as a mitigation for BHI or intra-mode BTI should use
these new indirect predictor controls to disable alternate predictors for RETs.
See: https://www.intel.com/content/www/us/en/developer/articles/technical/
software-security-guidance/technical-documentation/branch-history-injection.html
Tracked-On: #7907
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
TLFS defined 2 vMSRs which can be used by Windows guest to get the
TSC/APIC frequencies from hypervisor. This patch adds the support
of HV_X64_MSR_TSC_FREQUENCY/HV_X64_MSR_APIC_FREQUENCY vMSRS whose
availability is exposed by CPUID.0x40000003:EAX[bit11] and EDX[bit8].
v1->v2:
- revise commit message to highlight that the changes are for WaaG
Tracked-On: #7876
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
On some platforms CPUID.0x15:ECX is zero and CPUID.0x16 can
only return the TSC frequency in MHZ which is not accurate.
For example the TSC frequency obtained by CPUID.0x16 is 2300
MHZ and the TSC frequency calibrated by HPET is 2303.998 MHZ
which is much closer to the actual TSC frequency 2304.000 MHZ.
This patch adds the support of using HPET to calibrate TSC
when HPET is available and CPUID.0x15:ECX is zero.
v3->v4:
- move calc_tsc_by_hpet into hpet_calibrate_tsc
v2->v3:
- remove the NULL check in hpet_init
- remove ""& 0xFFFFFFFFU" in tsc_read_hpet
- add comment for the counter wrap in the low 32 bits in
calc_tsc_by_hpet
- use a dedicated function for hpet_calibrate_tsc
v1->v2:
- change native_calibrate_tsc_cpuid_0x15/0x16 to
native_calculate_tsc_cpuid_0x15/0x16
- move hpet_init to BSP init
- encapsulate both HPET and PIT calibration to one function
- revise the commit message with an example"
Tracked-On: #7876
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
As mentioned in previous patch, wbinvd utilizes the vcpu_make_request
and signal_event call pair to stall other vcpus. Due to the fact that
these two calls are not thread-safe, we need to avoid concurrent call to
this API pair.
This patch adds wbinvd lock to serialize wbinvd emulation.
Tracked-On: #7887
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Commit d575edf79a changes the internal
implementation of wait_event and signal_event to use a counter instead
of a boolean value.
The background was:
ACRN utilizes vcpu_make_request and signal_event pair to shoot down
other vcpus and let them wait for signals. vcpu_make_request eventually
leads to target vcpu calling wait_event.
However vcpu_make_request/signal_event pair was not thread-safe,
and concurrent calls of this pair of API could lead to problems.
One such example is the concurrent wbinvd emulation, where vcpus may
concurrently issue vcpu_make_request/signal_event to synchronize wbinvd
emulation.
d575edf commit uses a counter in internal implementation of
wait_event/signal_event to avoid data races.
However by using a counter, the wait/signal pair now carries semantics of
semaphores instead of events. Semaphores require caller to carefully
plan their calls instead of multiply signaling any number of times to the same
event, which deviates from the original "event" semantics.
This patch changes the API implementation back to boolean-based, and
re-resolve the issue of concurrent wbinvd in next patch.
This also partially reverts commit 10963b04d1,
which was introduced because of the d575edf.
Tracked-On: #7887
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To avoid hardcoding the minimum "iasl" version in multiple places, IASL_MIN_VER
is defined in the top-level Makefile and is passed to config_tools.
This patch verifies "iasl" version against IASL_MIN_VER directly in
config_tools.
Tracked-On: #7880
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
At build time (on the *dev* machine), config_tools depends on "iasl" to
generate the binary of ACPI tables for pre-launched VMs.
This patch does:
- pass ASL_COMPILER to config_tools
By default, ASL_COMPILER is initialized by "which iasl" at build time.
User could override it by specifying ASL_COMPILER as the build option,
like below:
make BOARD=xxxx SCENARIO=yyyy ASL_COMPILER=/usr/local/bin/iasl
- use ASL_COMPILER as the path to the "iasl" compiler in config_tools
v1 -> v2:
- add a check to make sure ASL_COMPILER is initialized to a value
Tracked-On: #7880
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
When CONFIG_MULTIBOOT2 is disabled, 'create_service_vm_efi_mmap_desc' is
unused and build fails because [-Werror=unused-function] is set.
boot/guest/bzimage_loader.c:188:17: error: 'create_service_vm_efi_mmap_desc' defined but not used [-Werror=unused-function]
188 | static uint16_t create_service_vm_efi_mmap_desc(struct acrn_vm *vm, struct efi_memory_desc *efi_mmap_desc)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Tracked-On: #7634
Signed-off-by: Qiang Zhang <qiang4.zhang@linux.intel.com>
Updates to the TSC members and maintainer list
* Update the Technical Steering Committee (TSC) members following the election
of Junjie Mao as the new chair
* Update Thomas Gleixner's email address since he joined Intel Corporation
* Delete the MAINTAINERS files in the 'hypervisor' and 'devicemodel' folders
as they are obsolete and unused.
Tracked-On: #7706
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
In 'get_ptdev_info()', variables 'bdf' and 'vbdf' are
16bits in size but their base addresses are converted
to 32bit pointers when calling 'get_entry_info()'.
This mismatch causes insufficient space when storing
to memory pointer by 'bdf' or 'vbdf' in 'get_entry_info()',
where those pointers are regarded as 32bits width memory.
This patch refines definition of 'get_entry_info()'.
Tracked-On: #7547
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
If multiple control fields in GCMD_REG register need to be modified, software
must serialize the modifications through multiple writes to this register.
So one-shot bits (bits 30-29, 27 and 24) in gcmd should not been set.
Otherwise, other control field may be written to GCMD_REG at the same time
with one-shot bit (Clearing one-shot bit has no effect, software sets this field
would set/update this control field used by hardware).
Tracked-On: #7381
Signed-off-by: Fei Li <fei1.li@intel.com>
There is an issue of calculate 2^n roundup of CONFIG_MAX_PT_IRQ_ENTRIES,
and the code style is very ugly when we use macro to fix it.
So this patch move MAX_IR_ENTRIES to offline tool which could do align
check and calculate it automatically.
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
dm/vrtc.c:565:33: error: 'current' may be used uninitialized in this
function.[-Werror=maybe-uninitialized]
Move the local variable definition into one code block to avoid warning.
Tracked-on: #7511
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Current code limit the MAX vUART number to 8 which is not enough for
Service VM which should config S5 UART for each user VM.
We could count how many vUARTs we need by offline tool, so remove the
define of MAX_VUART_NUM_PER_VM to offline tool is a simple and accurate
way to allocate vUARTs.
Tracked-On: #8782
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
The comparison "ctx->md_info == NULL" (if ctx is not NULL) will always evaluate
as 'false' for the address of 'hmac_ctx' will never be NULL.
This patch remove this unnecessary check.
Tracked-On: #7453
Signed-off-by: Fei Li <fei1.li@intel.com>
For physical RTC is monotonic growth, ensure vRTC monotonicity.
Periodical calibration and physical RTC modification may have
impact. Check it before reading
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
For Service VM modify physical rtc time and vrtc will calibrate
time by read physical rtc. So when Service VM modify physical
time, calibrate all vrtc.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
For TSC's precision (20~100ppm) is lower than physical RTC (less than 20ppm),
vRTC need to be calibrated by physical RTC. A timer tiggers calibration for
vRTC every 3 hours. This can improve efficiency because physical RTC can be
read once and calibrate all vRTC.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
VRTC for hv used to ignore writes to vRTC register.
This patch add time modification to vRTC.
Add base RTC time and TSC offset to get the current time. Convert
current time to vRTC register values (`struct rtcdev`). Then
modify a register, and calculate a new time. Get RTC offset by
substrcting new time from current time.
Thereafter, add RTC offset also when get current time. Then user
can get the modified time.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Service VM write physical RTC register.
Both RTC time modify and Configuration register is available.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
During setting RTC time, driver will halt RTC update. So support
bit 7 of reg_b. When it set to 0, time will be updated. And
when it's set to 1, rtc will keep the second it was set.
In the process of getting RTC time, driver sets alarm interrupt,
waits 1s, and get alarm interrupt flag. So support alarm interrupt
flag update. If alarm interrupt is enabled (bit 5, reg_b set to 1),
interrupt flag register will be set (bit 7 & bit 5 of reg_c) at
appropriate time.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add support for hour format.
Bit 1 of register B indicates the hour byte format. When it's 0,
twelve-hour mode is selected. Then the seventh bit of hour register
presents AM as 0 and PM as 1.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add judging of the vRTC data mode. If BCD data mode is inuse,
make conversion of data.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Current code would read physical RTC register and return it directly to guest.
This patch would read a base physical RTC time and a base physical TSC time
at initialize stage. Then when guest tries to read vRTC time, ACRN HV would
read the real TSC time and use the TSC offset to calculate the real RTC time.
This patch only support BIN data mode and 24 hour mode.
BCD data mode and 12 hour mode will add in other patch.
The accuracy of clock provided by this patch is limited by TSC, and will
be improved in a following patch also.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
when SSRAM regions are assigned to service VM
to support virtulization of SSRAM for post-launched
RTVMs, service VM need to access all SSRAM regions
for management, typically, service VM does data
cleanup in SSRAM region when it is reclaimed from
a shutdown RTVM.
This patch update memory type from UC(by default)
to WB, else SSARM region will be evicted when access
from guest happens.
Tracked-On: #7425
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
When booting prelaunch RTVM with SSRAM enabled, we need to delete the
SSRAM region that is used by prelaunch RTVM from Service VM EPT mapping.
If it is not used, or it is not fully used, the SSRAM or the rest SSRAM
should be in Service VM map.
But current code has a issue that it always deletes all SSRAM region
from Service VM EPT, even when no SSRAM is enabled for prelaunch RTVM.
This could cause the post RTVM with SSRAM boot failure, as DM checks and
removes SSRAM region from Service VM EPT during post RTVM setup.
Changing get_software_sram_size() to PRE_RTVM_SW_SRAM_MAX_SIZE could
solve the issue, as PRE_RTVM_SW_SRAM_MAX_SIZE is the SSRAM size that
prelaunch RTVM actually uses.
Tracked-On: #7401
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
The movdqu instruction moves unaligned double quadword (128 bit)
contained in XMM registers.
This patch uses pointers as input parameters of the function
write_xmm_0_2() to get 128-bit value from 64-bit array for each XMM
register.
Tracked-On: #7380
Reviewed-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Jiang, Yanting <yanting.jiang@intel.com>
When enabling SRIOV capability for a PF in Service VM, ACRN Hypervisor
should add VF BARs mapping for PF since PF's firmware would access these
BARs to do initialization for VFs when it's first created.
Tracked-On: #4433
Signed-off-by: Fei Li <fei1.li@intel.com>
In spite of Table Size in MSI-X Message Control Register [Bits 10:0] masks as
RO (Register bits are read-only and cannot be altered by software), In Spec
PCIe 6.0, Chap 6.1.4.2 MSI-X Configuration "Depending upon system software
policy, system software, device driver software, or each at different times or
environments may configure a Function’s MSI-X Capability and table structures
with suitable vectors."
This patch just pass through MSI-X Control Register field to guest.
Tracked-On: #7275
Signed-off-by: Fei Li <fei1.li@intel.com>
Since CAT support for hybrid platform is landed, let's remove some old declarations
which are no longer used.
Tracked-On: #6690
Signed-off-by: Tw <wei.tan@intel.com>
Ignore the "scenario" and "board" field in <scenario>.xml:
<acrn-config board="whl-ipc-i5" scenario="shared">
Tracked-On: #7345
Signed-off-by: Conghui <conghui.chen@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
1. Support absolute path for scenario file.
2. Use the scenario xml file name as scenario name, but if it is
'scenario.xml', use the upper level directory name.
e.g.
SCENARIO=<pathxxx>/shared/scenario.xml
Then scenario name would be 'shared'.
3. Change 'realpath' to 'abspath' as we should keep the original path
for scenario file even it is a link file. This will make sure the
scenario name is always consistent with file set in 'SCENARIO='.
Tracked-On: #7345
Signed-off-by: Conghui <conghui.chen@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The current code only supports 2 HPA regions per VM.
This patch extended ACRN to support 2+ HPA regions per VM, to use host
memory better if it is scatted among multiple regions.
This patch uses an array to describe the hpa region for the VM, and
change the logic of ve820 to support multiple regions.
This patch dependent on the config tool and GPA SSRAM change
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
When CPUID executes with EAX set to 1AH, the processor returns information about hybrid capabilities.
This information is percpu related, and should be obtained directly from the physical cpu.
Tracked-On: #6899
Signed-off-by: Tw <wei.tan@intel.com>
Page table entry present check is page table type
specific and static, e.g. just need to check bit0
of page entry for entries of MMU page table and
bit2~bit0 for EPT page table case. hence no need to
check it by callback function every time.
This patch remove 'pgentry_present' callback field and
add a new bitmask field for this page entry present check.
It can get better performance especially when this
check is executed frequently.
Tracked-On: #7327
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
When CPUID executes with EAX set to 02H, the processor returns information about cache and TLB information.
This information is percpu related, and should be obtained directly from the physical cpu.
BTW, this patch is backported from v2.7 branch.
Tracked-On: #6931
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
This patch is to eliminate a code scan warning.
p_elf_header32 was given a value when it was declared, but later it was
given the same value again. Just remove the later one.
Tracked-On: #7318
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Now interrupt vector in ACRN hypervisor is maintained as global variable, not
per-CPU variable. If there're more PCI devices, the physical interrupt vectors
are not enough most likely.
This patch would not allocate physical interrupt vector for MSI/MSI-X vectors
if interrupt posting could been used to inject the MSI/MSI-X interrupt to
a VM directly.
Tracked-On: #7275
Signed-off-by: Fei Li <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Using the SSRAM area size extracted by config_tools, the patch changes
the hard-coded GPA SSRAM area size to its actual size, so that
pre-launched VMs can support large(>8MB) SSRAM area.
When booting service VM, the SSRAM area has to be removed from Service
VM's mem space, because they are passed-through to the pre-rt VM. The
code was bugged since it was using the SSRAM area's GPA in the pre-rt
VM. Changed it to GPA in Service VM.
Tracked-On: #7212
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
On hybrid platform(e.g. ADL), there may be multiple instances of same level caches for different type of processors,
The current design only supports one global `rdt_info` for each RDT resource type.
In order to support hybrid platform, this patch introduce `rdt_ins` to represents the "instance".
Also, the number of `rdt_info` is dynamically generated by config-tool to match with physical board.
Tracked-On: projectacrn#6690
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
As RDT related information will be offered by config-tool dynamically,
and HV is just a consumer of that. So there's no need to do this detection
at startup anymore.
Tracked-On: projectacrn#6690
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
remove board and scenario attributes dependency for new configuration.
To do:
will remove board and scenario attributes in all scenario XML files
and update the upgrader.py after the new configuration works.
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Conghui