Remove vm_configs folder and move all the XML files and generic code example into config_tools/data
Tracked-On: #5644
Signed-off-by: Xie, nanlin <nanlin.xie@intel.com>
Add xmls/samples folders under misc/vm_configs, and make soft link for
them.
Tracked-On: #5077
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Passthroughed devices won't be restored back to SOS once launch
script exits by default. However you could revert this behavior
by specifying '-r' parameter if you want.
Tracked-On: #4514
Signed-off-by: Tw <wei.tan@intel.com>
For "Split Device Model", pass-through PCI will be implemented in HV,
"reset" param is added into DM cmdline to ensure PCI device's status before launching VM.
WaaG will fail to boot if adding pass-through audio in default,
because current audio card's reset function isn't supported on WHL platform.
Tracked-On: #4397
Signed-off-by: fangfang.shen <fangfang.shen@intel.com>
The parameter of intel_pstate should be 'disable' instead of 'disabled'.
This patch fixes it.
Tracked-On: #4094
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Wrong NVMe bdf info of KBLNUC7i7DNH is modified by mistake; so change it back.
Tracked-On: #3827
Reviewed-by: binbin.wu@intel.com
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
The default script is for nvme passthrough to RT_LaaG; you can change it
to sata or using virtio_blk
Tracked-On: #3575
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: binbin.wu@intel.com; kaige.fu@intel.com
After Windows 10, version 1607, the cross-signed drivers are forbiden
to load when secure boot is enabled.
Details please refer to
https://docs.microsoft.com/en-us/windows-hardware/drivers/install/kernel-mode-code-signing-policy--windows-vista-and-later-
That means the kvm-guest-drivers-windows can't work when secure boot enabled.
So we found another windows virtio FE drivers from Oracle to resolve this issue
but have to change another subsystem vendor ID for the virtio BE services.
This patch introduces a new DM CMD line "--windows" to launch WaaG with Oracle virtio devices including
virtio-blk, virtio-net, virtio-input instead Redhat. It can make virtio-blk, virtio-net and virtio-input
devices work when WaaG enabling secure boot.
Tracked-On: #3583
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Remove the '-c' option from all scripts as it has been removed from
dm code.
Tracked-On: #3663
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
* Update the launch scripts provided as examples on how to launch a Zephyr,
VxWorks or Windows User VM to directly use the 'OVMF.fd' bios file installed
by default in '/usr/share/acrn/bios/'
* Remove the OVMF.fd that was kept under 'doc/tutorials' (no longer needed)
* Adapt the tutorials to reflect this change
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Adjust the 'launch_uos.sh' script used to start a LaaG User VM to user the
OVMF.fd bios file installed under /usr/share/acrn/bios. It currently points
at a file in the local folder but neither our instructions nor our installation
script file puts it in this location. That results in an error when you try
to launch it.
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
1. for post-launch general VM, like LaaG, the vUART is emulated in DM,
so the power off control channel is:
acrn-dm:pty[master <-> salve] <--> acrn-dm:vUART <--> UOS:vUART
2. for RTVM, like RT-Linux, the vUART is emulated in hypervisor layer,
so the control channel is:
acrn-dm <--> SOS:/dev/ttyS1 <--> Hypervisor <--> UOS:vUART.
So the settings in launch script are different.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
We seperate the guest power event notify channel out. And now
it's required to give the guest power event notify channel
explicitly. Update the sample launch script to have correct
parameters.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
OVMF will open source for V1.2, so enable launch LaaG with OVMF.
Tracked-On: #3506
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
This patch is used to expand WaaG memory from 2G to 4G in launch script.
Tracked-On: #3576
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Set virtio-console BE to stdio for LaaG. Remove 'com1' but still keep
'console=ttyS0' in Laag kernel cmdline.
'console=ttyS0' means LaaG will use ttyS0 (0x3F8) as a console port, and
during bringup, it will access port ttyS0. When the same port is added
to hypervisor configuration file as a console port, the output will be
captured by hypervisor console, and can switch by "vm_console <vm_id>".
Tracked-On: #3370
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
This reverts commit c42b41fe2b.
Kernel will stay in xapic mode with this boot arg, lapic won't be passthru, so revert.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
This commit adds "noapic" boot option to rt-linux, to skip IOAPIC probe.
Tracked-On: #3227
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
SOS bootargs is specified in vm_configurations.h in different scenarios.
The files in devicemodel/samples/<board>/sos_bootargs_*.txt are not used anymore.
Remove these deprecated files to avoid confusion.
Tracked-On: #3214
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The path modify the configuration for the runC container. There have
three changes for the configuration.
1、args [ "sh" ]: this is an example parameter and when the VM is started,
the parameter will be replaced by the launch_UOS script.
2、The linux capabilities will guarantee the Acrn-dm have enough capabilities
to run in container. For more infomation about the capalility you can refer
http://man7.org/linux/man-pages/man7/capabilities.7.htm
3、Move the rootfs to the parent directory, so all the container can share
the same rootfs.
Tracked-On: projectacrn#2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Current launch script leaves stdio to OVMF console and, vxworks console to pty, so users
need to use additional tool like minicom to connect to pty device to use vxWorks.
To be more convinient, this commit changes the vxWorks to use the stdio by default, and OVMF
is not availabe by default.
Tracked-On: #3069
Signed-off-by: Yan, Like <like.yan@intel.com>
When FE virtio devices work in polling mode, sshd.service can't start
normally and blocks at generating random bytes. When reading from
the random source, getrandom() blocks caused by no random bytes.
Tracked-On: #3268
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
The patch adds new argument for launch_uos script for NUC.
In the patch add "-C" parameter for launch_uos script. When launch
the script with the parameter the ACRN-dm will be launched in the
runC container. For more information about this please refer to
ACRN-dm QoS document.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Binbin Wu binbin.wu@intel.com
Reviewed-by: Geoffroy Van Cutsem geoffroy.vancutsem@intel.com
Hostbridge is necessary for passing kernel pci subsystem initialization
sanity check which is located in pci_sanity_check(). It will check
whether a host bridge exists.
BTW, set rtvm flag explicitly.
Tracked-On: #3152
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
As vm config tool will override the passthrough devices if run on
different hw, and it will take a lot of work to search and
replace the passthrough device.
This patch refine the passthrough devices that tools to overwrite.
Tracked-On: #3127
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
for vm_name with vxworks_vm1 or zephyr_vm1 or vm1
grep "vm1" will match three of them, add -w option fix this issue
Tracked-On:#3081
Signed-off-by: zhangyun <yunx.zhang@intel.com>
This patch adds one sample script to launch Windows as guest.
Tracked-On: #3099
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
This patch add one sample script to launch VxWorks as guest.
Tracked-On: #3069
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
add logger_setting params in launch_uos.sh for NUC & UP2;
then the logger system can work; by default console logger
is enabled.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
For multiple guest os and particular audio features support domain id
and name is required.
Tracked-On: #2924
reviewed-by: Yu Wang <yu1.wang@intel.com>
reviewed-by: Yakui zhao <yakui.zhao@intel.com>
reviewed-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: Marcin Pietraszko <marcin.pietraszko@intel.com>
Some projects based on ACRN don't want tap name to contain "acrn_"
prefix. This patch removes that prefix.
Tracked-On: #2509
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The patch adds mount namespace for the container. Without the patch
when we destroy the container, there still have mountinfo for the
container. This is one workaroud for runC bug. If the mount namespace
is disabled, when try to mount host "/" to container "/", there will
cause the issue. Detail discussion as following link.
"https://groups.google.com/a/opencontainers.org/forum/#!searchin/
dev/mount$20namespace%7Csort:date/dev/p10bq-kXODk/obkqBRdxCQAJ"
After enable mount namespace, some small performance imapcts for
specific mediator, likes USB. Will keep monitor runc community,
and revert this patch once related runc patches get integrated.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The patch adds "-C" parameter in sample launch_uos.sh file to enable
launch Device-Model in runC container. The argments will be linked to
SOS /usr/share/acrn/add/vm1.args, and acrnd will use the it as default
start argument.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
It makes more sense by aligning directory name with board name.
Tracked-On: #2760
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
This patch add one sample script to launch zephyr as guest.
Tracked-On: #2713
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
The patch changes runC container's default rootfs directory. In the patch
change the rootfs to runC bundle's parent directory. Because in ACRN we map
SOS rootfs to container so the rootfs is an empty directory, after move it to
parent directory all the container can share the same rootfs.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
The patch adds more Linux capabilities for runC container. In ACRN runC
we will map native root directory to the container, when we launch UOS from
container it need more Linux capabilities to operate dev node. So add the
capabilities in runC configuration file.
Tracked-On: #2020
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Xie, nanlin