Updates to the TSC members and maintainer list
* Update the Technical Steering Committee (TSC) members following the election
of Junjie Mao as the new chair
* Update Thomas Gleixner's email address since he joined Intel Corporation
* Delete the MAINTAINERS files in the 'hypervisor' and 'devicemodel' folders
as they are obsolete and unused.
Tracked-On: #7706
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Flow Table 6-95 from xHCI spec, Ring Segment Size defines
the number of TRBs supported by the ring segment, valid
values for this field are 16 to 4096.
Tracked-On: #6981
Signed-off-by: Liu Long <long.liu@intel.com>
tfd is one data field of FIS for AHCI, it is unacceptable if it is
random value, could cause AHCI data transport failure.
Acturally there is no chance the switch statement has the value other
than 0~3, since there is only 2 bit to deduce.
Add the initial value for tfd as ATA_S_ERROR, which is checked by
function ahci_write_fis_d2h afterwards, so guest driver could handle it well.
Tracked-On: #7679
Signed-off-by: hangliu1 <hang1.liu@linux.intel.com>
Virtual display is component which based on native window system.
This feature depended phisical monitor connected and graphic driver in
SOS running correctly. If these dependencies fail, it is a fatal error
for virtual display. We have to terminate the device model to let user
fix runtime environment issue for graphics.
Tracked-On: #7672
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
The vsock cid type is u64, redefine the cid type to u64, and use
dm_strtoul API replace dm_strtoi.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
1280x720 resolution will crash IDD of windows guest. To simplise, just
remove this mode.
Tracked-On: #7507
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
All the modes that vdisplay supported should be reported to driver,
then driver should select the modes which report to OS.
Tracked-On: #7507
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The virtio feature bits is 64bits but the access will be split
as two times 32bits access. This patch fixes the bug which overwrites
another side 32bits, and causes feature bits are lost.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch supports the user space logic of vhost vsock which
is majorly for its initialization phase.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The patch expose the vhost kernel ioctrl API and remove the virtio_net
operation functions to the virtio_net code module.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Use needed constants from libderm instead of directly using
kernel UAPI.
Tracked-On: #6688
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
Since any uuid relevant action directly uses Linux kernel UAPI
(linux/uuid.h) the use of libuuid is not required.
Tracked-On: #6688
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
EDID uses the bytes of 38-53 to support up to 8 standard modes. And it is
based on the mechanism: Byte 0 defines the xres / 8 - 31 and byte 1 defines
the aspect_ratio/refresh_rate.
But now it uses the incorrect logic in course of adding standard mode, which
causes that no standard mode is added in EDID block.
Fix it and add another two standard modes so that the guest_vm can parse
more modes from EDID.
Tracked-On: #7376
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
The EDID uses the bytes of 54-125 to define the four detailed_timing_blocks.
But the static offset is used to update the DTB. This will cause that
the incorrect offset is used for DTB if the edid_generate is called several
times.
Tracked-On: #7376
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
This patch checks the change of "-s" sub parameters, which was
obsoleted or moved and the print some warnings msg or show the new
format.
The following obsoleted parameters are covered:
-s ,pci-gvt
-s ,virtio-hdcp
-s ,npk
-s ,virtio-coreu
--mac_seed
Reviewed-by: VanCutsem Geoffroy <geoffroy.vancutsem@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
For all Definition Blocks in ACPI Namespace, their name are a fixed 32 bits.
This patch refine CPU Definition Blocks name to support more than 10 CPUs
for a guest.
Tracked-On: #7387
Signed-off-by: Fei Li <fei1.li@intel.com>
Now vdpy_get_display_info/get_edid is called before vdpy_init.
This is incorrect. They should be called after setting up the
connection with vdisplay.
Tracked-On: #7376
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Now some fileds are not initialized, which causes that ACRN-DM doesn't
handle the request of VIRTIO_GPU_CMD_GET_DISPLAY_INFO and
VIRTIO_GPU_CMD_GET_EDID.
Tracked-On: #7376
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
The virtio_gpu in guest_vm will try to fetch the EDID to query
the supported resolution. Guest vm will send the cmd of
VIRTIO_GPU_CMD_GET_EDID and receive the response of VIRTIO_GPU_RESP_OK_EDID.
Now acrn-dm has some issues in course of handlding EDID request: Incorrect
resp type, the incorrect response. This will cause that the guest_vm fails
to fetch the EDID.
Tracked-On: #7376
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
This patch checks the obsoleted parameters and print some warnings
instead of exiting the acrn-dm directly. The following obsoleted
parameters are covered:
-i, --ioc_node
-G, --gvtargs
-Y, --mptgen
--vsbl
--part_info
--pm_by_vuart
--pm_notify_channel
Tracked-On: #6690
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Otherwise it will use the "acrn_dm" as the thread_name, which is not
convenient to check the cpu_usage of rendering_thread.
Tracked-On: #7337
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
In course of creating the udmabuf, udmabuf_create_list is allocated and
passed to kernel. After the dmabuf is returned, it is not used
any more. Need to free it otherwises it will cause the memory leak.
Tracked-On: #7337
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
It still tries to access the gpu->vdpy_handel after the gpu
is free. This is incorrect.
Tracked-On: #7337
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
When virtio-gpu tries to submit the framebuffer based on
VIRTIO_GPU_CMD_2D, one pixman_image will be created. When the
sdl rendering_thread is terminated, the pixman_image will be
released. But its pointer is set to NULL. In the next reboot,
its access in vdpy_surface_set is incorrect.
Tracked-On: #7337
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Now all the 3D ops are handled in one dedicated thread. As 3D ops are
not safe in multi-thread env, some checks are added so that it can indicate
that it is not in the expected code path.
Tracked-On: #7296
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Otherwise the memory related with vga_context is leaked.
v1->v2: Use the pthread_join instead of usleep to wait for
the termination of vga_thread.
Tracked-On: #7296
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
This is not needed as it is reconfigured in course of vga_thread_loop.
At the same time it is not thread-safe as the 3D api is involved
in vdpy_surface_set.
v2->v3: move the initialization of vga_surface width/height into
vga_thread.
Tracked-On: #7296
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
In order to support the VGA op, one vga_thread is created. But
in course of virtio_gpu_reset, it will also create one vga_thread.
This is incorrect.
v1->v2: the thread_id of vga_thread is treated as read-only after
the thread is created.
One thread_status based on atomic type indicates the life_cycle
of vga_thread.
v2->v3: Add the vga_thread_mtx in course of changing life_cycle of vga_thread
Tracked-On: #7296
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
The guest memory is allocated through hugetlb. Huge page fault is
triggered by writing a byte to the starting address for each huge page.
In hugetlb_fault(), The physical pages are allocated and *clear*.
So no need to erasing the memory again after hugetlb setup. This will
bring about 130ms (changes with platform) latency for each 1G memory.
Notice: this means we depends on kernel to erase the memory in huge page
fault!
Tracked-On: #7298
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add license information to virtio_gpu.c
Fix some grammar issues.
Tracked-On: #7241
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The DMABuf sharing is based on the BLOB feature. This will
check the attribute of system memory for guest_vm and udmabuf.list_limit
parameter. If it meets with the requirement, export the BLOB feature
so that the FE driver in guest_vm can send the blob cmd.
VIRTIO_GPU_CMD_CREATE_BLOB:
VIRTIO_GPU_CMD_SET_SCANOUT_BLOB:
VIRTIO_GPU_CMD_SET_FLUSH(BLOB)
Tracked-On: #7210
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Now Virtio-gpu FE is using the below cmds to submit the framebuffer that
needs to be displayed.
VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D
VIRTIO_GPU_CMD_SET_SCANOUT
VIRTIO_GPU_CMD_FLUSH
This will introduce twice copy. In order to optimize the twice copy, the below
cmds are added and the virtio-gpu BE can use the dma-buf sharing.
VIRTIO_GPU_CMD_CREATE_BLOB
VIRTIO_GPU_CMD_SET_SCANOUT_BLOB
VIRTIO_GPU_CMD_FLUSH
V2->V3: Remove the inlined header file of devicemodel/include/public/udmabuf.h
to avoid the license issue
Tracked-On: #7210
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Now the Opengl rendering is used implicitly in SDL backend. But sometimes
it needs to create the texture explicitly based on DMABuf so that it can
render the framebuffer submitted from virtio-gpu.
Tracked-On: #7210
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
After using the memfd to allocate memory for guest vm, it needs to
query the offset in memfd for the given GPA. In order to search the
memfd/offset, the added memory_region from memfd needs to be kept in
one arrary.
Tracked-On: #7210
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
The ACRN-DM uses the explicit hugetlb file to allocate the memory
for guest and the 2M/1G hugetlb can be used. This is based on mounting
hugetlb filesystem.
Now the Linux provides one flexbile memfd mechanism to allocate the memory
and this can make it possible to create the udmabuf for sharing. And the
memfd still can be based on Hugetlb 1G/2M policy. This can bring the below
benefits besides the 1G/2M hugetlb support.
a. memfd is based on anonymous file
b. possible dmabuf mechanism
v2->v3: After completing the mmap for memfd, it will call the ftruncate to
set the desired size and then add the F_SEAL_SEAL flag.
Tracked-On: #7210
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Now the memory region is aligned down to 2M if 2M hugetlb is supported.
Maybe some contents are dropped if it is not aligned.
Tracked-On: #7210
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
- VGA interface of virtio-gpu adapter support
- Ovmf:ACRN: Fix the building error
- acrn: fix how to get memory below 4G
Tracked-On: #7231
Signed-off-by: Peter Fang <peter.fang@intel.com>
The virtio-gpu needs to include some system header files.
In order to support the cross-compiler building, the header
path is added.
Tracked-On: #7210
Reported-by: Naveen Kumar Saine <naveen.kumar.saini@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Legacy VGA & VBE interface as a common interface is supported by
many legacy and modern OS. Many installer of OS distribution use
this interface to display the GUI of installer when setup a refresh
new installation on bare-metal. Besides, Windows OS always use this
interface to display it's BSOD, recovery mode & safe mode GUI. It
is need because Windows don't include virtio-gpu driver as their
in-box driver, VGA interface will be used before the virtio-gpu
driver been installed.
To be compatiable with the PCI bar layout of legacy VGA, the layout
is refined to meet with the requirement of legacy VGA and modern
virtio-gpu.
BAR0: VGA Framebuffer memory, 16 MB in size.
BAR2: MMIO Space
[0x0000~0x03ff] EDID data blob
[0x0400~0x041f] VGA ioports registers
[0x0500~0x0516] bochs display interface registers
[0x1000~0x17ff] Virtio common configuration registers
[0x1800~0x1fff] Virtio ISR state registers
[0x2000~0x2fff] Virtio device configuration registers
[0x3000~0x3fff] Virtio notification registers
BAR4: MSI/MSI-X
BAR5: Virtio port io
Tracked-On: #7210
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Hardware cursor emulation of virtio-gpu video adapter. Guest vm can
show its own cursor in virtual display, not share the cursor with
service vm. It also accelerated by SDL(OpenGL ES 2.0 backend) API
with hardware acceleration based on the GPU hardware own by service
vm.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Implement 2D mode of virtio-gpu adapter which can transfer outputs
from guest vm framebuffer and store them to host 2D scanout buffers.
These 2D scanout buffer can be shown by calling vdpy_surface_set/update
API provided device/include/vdisplay.h.
Virtio-gpu 2D commands calling sequence:
1) VIRTIO_GPU_CMD_GET_EDID
2) VIRTIO_GPU_CMD_GET_DISPLAY_INFO
3) VIRTIO_GPU_CMD_RESOURCE_CREATE_2D
4) VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING
5) VIRTIO_GPU_CMD_SET_SCANOUT
6) VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D
7) VIRTIO_GPU_CMD_RESOURCE_FLUSH
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extended display identification data(EDID) is a data to store
display timings which are supported by ACRN virtual monitor.
Virtio-gpu FE driver will request it to config crtc for display
resolutions.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
ACRN virtual monitor shown as a GUI system window of service vm.
It can display graphic outputs of guest vm which is stored in
service vm's buffers by virtio-gpu. Display operation is accelerated
by Intel GPU PF(SRIOV) device with SDL(OpenGL ES 2.0 backend) API.
This provides one generic display solution. When the virtio-gpu is
added, it will firstly try to setup the connection to graphics system
and then display the framebuffer from the guest vm in the created
window region.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Virtio-gpu is a virtio based graphic adapter. It supports 2D mode
which can transfer the guest vm's framebuffer into service vm's
buffers for displaying. It can co-work with Intel GPU VF(SRIOV)
device and provide thransport for the accelerated contents. With
this, guest vm can benefit Intel GPU hardware to accelerate media
coding, 3D rendering and compute.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This reverts commit 6750d5a277.
the bug is root caused and fixed, so recovery the original patch.
Tracked-On: #6966
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Yonghua Huang