The MSI Message Address and Message Data have no valid data after Power-ON. So
there's no need to initialize them by reading the data from physical PCI configuration
space.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
this patch is to fix error debug message
for invalid 'param' case, there is no string
variable for '%s' output, which will potenially
trigger hypervisor crash as it may access random
memroy address and trigger SMAP violation.
Tracked-On: #3801
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
We only support Type 0 and Type 1 PCI device. Remove PC-Card type support which
was originally described in the [PC-Card] and is used in previous versions of
the programming model.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
When a VM is configured with LAPIC PT mode and its vCPU is in x2APIC
mode, the corresponding pCPU needs to be reset during VM shutdown/reset
as its physical LAPIC was used by its guest.
This commit fixes an issue where this reset never happens.
is_lapic_pt_enabled() needs to be called before reset_vcpu() to be able
to correctly reflect a vCPU's APIC mode.
A vCPU with LAPIC PT mode but in xAPIC mode does not require such reset,
since its physical LAPIC was not touched by its guest directly.
v2 -> v3:
- refine edge case detection logic
v1 -> v2:
- use a separate function to return the bitmap of LAPIC PT enabled pCPUs
Tracked-On: #3708
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jack Ren <jack.ren@intel.com>
it uses builtin function(__builtin_popcountl)in bitmap_weight(),
it will use the 'popcnt' instruction,
this patch enable 'popcnt' instruction support in Makefile
Tracked-On: #3663
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
- update the function argument type to union
Declaring argument as pointer is not necessary since it
only does the comparison.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
To enable static configuration of different scenarios, we configure VMs
in HV code and prepare all nesserary resources for this VM in create VM
hypercall. It means when we create one VM through hypercall, HV will
read all its configuration and run it automatically.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As we introduced vcpu_affinity[] to assign vcpus to different pcpus, the
old policy and functions are not needed. Remove them.
Tracked-On: #3663
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add this vcpu_affinity[] for each VM to indicate the assignment policy.
With it, pcpu_bitmap is not needed, so remove it from vm_config.
Instead, vcpu_affinity is a must for each VM.
This patch also add some sanitize check of vcpu_affinity[]. Here are
some rules:
1) only one bit can be set for each vcpu_affinity of vcpu.
2) two vcpus in same VM cannot be set with same vcpu_affinity.
3) vcpu_affinity cannot be set to the pcpu which used by pre-launched VM.
v4: config SDC with CONFIG_MAX_KATA_VM_NUM
v5: config SDC with CONFIG_MAX_PCPU_NUM
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
There is plan that define each VM configuration statically in HV and let
DM just do VM creating and destroying. So DM need get vcpu_num
information when VM creating.
This patch return the vcpu_num via the API param. And also initial the
VMs' cpu_num for existing scenarios.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MAX_PCPU_NUM is different on various BOARDs. So we move the generic
definition from Kconfig to each board's config header file.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Sometimes we need know the number of 1 in one bitmap. This patch provide
a inline function bitmap_weight for it.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we create vcpus while VM being created in hypervisor. The
create vcpu hypercall will not be used any more. For compatbility,
keep the hypercall HC_CREATE_VCPU do nothing.
v4: Don't remove HC_CREATE_VCPU hypercall, let it do nothing.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
it will panic if phys_cpu_num > CONFIG_MAX_PCPU_NUM
during init_pcpu_pre,after that no need to check it again.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
C99 supports variable-length array,
but misra-c required "variable-length array types shall not be used"
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
No need to memset since it will overwrite the memory
by copy_from_gpa in some cases.
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Initialize vBAR configure space when doing vPCI BAR initialization. At this time,
we access the physical device as we needs, no need to cache physical PCI device
BAR information beforehand.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add " with acrn-config" tag in build info when user build hypervisor with
acrn-config xmls would be helpful to identify the hypervisor configuration
in current build is from acrn-config xml or from source code.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Previously we generate config patch based on config xml in toplevel Makefile,
it brings two issues:
1. we could not generate xml configuration patch with hypervisor source only;
2. The github commit info of current code base which is defined in version.h
will be overwritten by the new generated config patch, then the lost commit
info would impact build identify and bug reproducing.
This patch fixed these two issues. Besides, the patch also modify the logic of
platform_acpi_info file existence judgement, which need to be depends on the
acrn-config patch.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
TSC would be reset to 0 when enter suspend state on some platform.
This will fail the secure timer checking in secure world because
secure world leverage the TSC as source of secure timer which should
be increased monotonously.
This patch save/restore TSC in host suspend/resume path to guarantee
the mono increasing TSC.
Note: There should no timer setup before TSC resumed.
Tracked-On: #3697
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. if SCENARIO=$(SCENARIO) is specified in make param, then override
the default CONFIG_$(SCENARIO) value in existed .config. This means
we don't need to modify the default SCENARIO config in Kconfig file
to build the hypervisor;
2. Some board name shortcuts like apl-nuc/kbl-nuc-i7 need to be converted
to official board name to make sure overrides working;
3. Previously make sbl-hypervisor did not load the defconfig so the
defconfig for boards are lost, this patch fix this issue;
4. remove SCENARIO param when make hypervisor, because SCENARIO could
be got from SCENARIO_NAME which parsed from .config;
Tracked-On: #3593
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The orignal communication port will lose data when tx is too fast, and
the data in FIFO will be overwritten.
Now, when the FIFO is full, stop sending more data. When the FIFO is not
full, notify the vuart to send more data.
Tracked-On: #3681
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For communication vuart, when it send data to target vuart's fifo, it
should meet the conditions:
1. MCR_LOOPBACK is not set
2. LCR_DLAB is not set
3. access reg is UART16550_THR
4. target_vu is not null
But the LCR_DLAB is missed now, and when vuart set it's UART16550_DLL,
it will be send to target by mistake as UART16550_DLL = UART16550_THR.
Add the missed condition.
DLAB in uart16550 spec:
Divisor Latch Access Bit.
1 = Allows access to the Divisor Latch Registers and reading of the FIFO
Control Register.
0 = Allows access to RBR, THR, IER and IIR registers.
Tracked-On: #3681
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Reserve memory for hv sbuf to avoid its possible overwriting on kernel memory.
For apl-up2, move hv_log address to 0x5de00000 to avoid possible conflict with
HV_RAM which start from 0x5e000000;
For nuc6cayh, move HV_RAM_START to 0x20000000 to avoid possible conflict with
hv_log which start from 0x1fe00000;
Tracked-On: #3533
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
In "commit 6ebc22" the vPCI device initialize sequence is wrong changed. This patch
tries to revert it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
In "commit 90480d" we use a pointer new_owner to point to the actual vPCI device
for post-launched VM when this device is assigned to this post-launched VM from
SOS. However, now DM will use SOS's vmsix_table_mmio_access_handler to trap vMSI-X
table mmio access for post-launched VM. So we should use the post-launched VM's
vPCI device in this case.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Now the structures(run_context & ext_context) are defined
in vcpu.h,and they are used in the lower-layer modules(wakeup.S),
this patch move down the structures from vcpu.h to cpu.h
to avoid reversed dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now the structures(union source & struct intr_source) are defined
in ptdev.h,they are used in vtd.c and assign.c,
vtd is the hardware layer and ptdev is the upper-layer module
from the modularization perspective, this patch move down
these structures to avoid reversed dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Using per_cpu list to record ptdev interrupts is more reasonable than
recording them per-vm. It makes dispatching such interrupts more easier
as we now do it in softirq which happens following interrupt context of
each pcpu.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
From modulization perspective, it's not suitable to put pcpu and vm
related request operations in schedule. So move them to pcpu and vm
module respectively. Also change need_offline return value to bool.
Tracked-On: #3663
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Now, we have assumption that SOS control whether the platform
should enter S5 or not. So when SOS tries enter S5, we just
forward the S5 request to native port which make sure platform
S5 is totally aligned with SOS S5.
With higher serverity guest introduced,this assumption is not
true any more. We need to extend the platform S5 process to
handle higher severity guest:
- For DM launched RTVM, we need to make sure these guests
is off before put the whole platfrom to S5.
- For pre-launched VM, there are two cases:
* if os running in it support S5, we wait for guests off.
* if os running in it doesn't support S5, we expect it
will invoke one hypercall to notify HV to shutdown it.
NOTE: this case is not supported yet. Will add it in the
future.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
do_acpi_s3 actually not limit to do s3 operation. It depends on
the paramters pm1a_cnt_val and pm1b_cnt_val. It could be s3/s5.
Update the function name from xx_s3 to xx_sx.
Tracked-On: #3564
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently nuc7i7dnb board is using default platform acpi info file so causes
S3/S5 not working properly.
This patch updates the correct ACPI info for nuc7i7dnb board.
Tracked-On: #3609
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
vPCI device should use its virtual configure space to access its BAR after vPCI
device initialized.
This patch also remove corner case "vPCI device will use its 64 bits BAR high idx
to access its BAR base address".
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
PCI BAR physical base address will never changed. Cache it to avoid calculating
it every time when we access it.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
When we support PCI MSI-X table BAR remapping, we may re-delete the MSI-X table BAR
region. This patch removes strict check for deleting page table mapping.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The current implement only do "only add a page table mapping for a region when
it's not mapped" check when this page table entry is a PTE entry. However, it
need to do this check for PDPTE entry and PDE entry too.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
pcpu_active_bitmap was read continuously in wait_pcpus_offline(),
acrn_vcpu->running was read continuously in pause_vcpu(),
add volatile keyword to ensure that such accesses are not
optimised away by the complier.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
As the pr_dbg will access sbuf which will call stac/clac inside, so can
not put pr_dbg between stac/clac, it will case Page Fault.
acrn_print_request is a debug feature, and it calls pr_dbg. when the
loglevel is set to 6, there will be Page Fault.
So, remove the caller for acrn_print_request and mask the function as
unused, reserved for debug.
Tracked-On: #3648
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
We did following to do platform reset:
1. Try ACPI reset first if it's available
2. Then try 0xcf9 reset method
3. if 2 fails, try keyboard reset method
This introduces some timing concern which needs be handled carefully.
We change it by following:
assume the platforms which ACRN could be run on must support either
ACPI reset or 0xcf9 reset. And simplify platform reset operation
a little bit:
If ACPI reset register is generated
try ACPI reset
else
try 0xcf9 reset method
Tracked-On: #3609
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
change the input parameter from vcpu to eptp in order to let this api
more generic, no need to care normal world or secure world.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Currently, the clos id of the cpu cores in vmx root mode is the same as non-root mode.
For RTVM, if hypervisor share the same clos id with non-root mode, the cacheline may
be polluted due to the hypervisor code execution when vmexit.
The patch adds hv_clos in vm_configurations.c
Hypervisor initializes clos setting according to hv_clos during physical cpu cores initialization.
For RTVM, MSR auto load/store areas are used to switch different settings for VMX root/non-root
mode for RTVM.
Tracked-On: #2462
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- remove some unnecessary includes
-- fix a typo
-- remove unnecessary void before launch_vms
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Li, Fei1