doc: tweak to GSG to fix code-block
Sphinx was complaining about a missing argument, and fixed some trailing spaces. Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit is contained in:
parent
ebea5e5ae4
commit
adcfe03482
|
@ -149,6 +149,7 @@ partition. Follow these steps:
|
||||||
# efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/sda -p 1 -L ACRN
|
# efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/sda -p 1 -L ACRN
|
||||||
|
|
||||||
.. note::
|
.. note::
|
||||||
|
|
||||||
Be aware that a Clearlinux update that includes a kernel upgrade will
|
Be aware that a Clearlinux update that includes a kernel upgrade will
|
||||||
reset the boot option changes you just made. A Clearlinux update could
|
reset the boot option changes you just made. A Clearlinux update could
|
||||||
happen automatically (if you have not disabled it as described above),
|
happen automatically (if you have not disabled it as described above),
|
||||||
|
@ -165,7 +166,7 @@ partition. Follow these steps:
|
||||||
default value is to use the Clearlinux bootloader, i.e.: ``\EFI\org.clearlinux\bootloaderx64.efi``.
|
default value is to use the Clearlinux bootloader, i.e.: ``\EFI\org.clearlinux\bootloaderx64.efi``.
|
||||||
#. ``uart=``: this tells the hypervisor where the serial port (UART) is found or
|
#. ``uart=``: this tells the hypervisor where the serial port (UART) is found or
|
||||||
whether it should be disabled. There are three forms for this parameter:
|
whether it should be disabled. There are three forms for this parameter:
|
||||||
|
|
||||||
#. ``uart=disabled``: this disables the serial port completely
|
#. ``uart=disabled``: this disables the serial port completely
|
||||||
#. ``uart=mmio@<MMIO address>``: this sets the serial port MMIO address
|
#. ``uart=mmio@<MMIO address>``: this sets the serial port MMIO address
|
||||||
#. ``uart=port@<port address>``: this sets the serial port address
|
#. ``uart=port@<port address>``: this sets the serial port address
|
||||||
|
@ -173,7 +174,7 @@ partition. Follow these steps:
|
||||||
Here is a more complete example of how to configure the EFI firmware to load the ACRN
|
Here is a more complete example of how to configure the EFI firmware to load the ACRN
|
||||||
hypervisor and set these parameters.
|
hypervisor and set these parameters.
|
||||||
|
|
||||||
.. code-block::
|
.. code-block:: none
|
||||||
|
|
||||||
# efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/sda -p 1 -L "ACRN Hypervisor" \
|
# efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/sda -p 1 -L "ACRN Hypervisor" \
|
||||||
-u "bootloader=\EFI\org.clearlinux\bootloaderx64.efi uart=mmio@0x9141e000"
|
-u "bootloader=\EFI\org.clearlinux\bootloaderx64.efi uart=mmio@0x9141e000"
|
||||||
|
|
Loading…
Reference in New Issue