diff --git a/doc/getting-started/rt_industry.rst b/doc/getting-started/rt_industry.rst
index cb788b4cf..58de28d2b 100644
--- a/doc/getting-started/rt_industry.rst
+++ b/doc/getting-started/rt_industry.rst
@@ -21,10 +21,12 @@ for the RTVM.
   (refer to :ref:`the tables <hardware_setup>` for detailed information).
 - If you need to enable the serial port on KBL NUC, navigate to the
   :ref:`troubleshooting section <connect_serial_port>` that discusses how to prepare the cable.
-- Follow the below steps to install Clear Linux OS (version 32030) onto both disks on the KBL NUC:
+- Follow below steps to install Clear Linux OS (Ver: 31670) onto the SATA disk
+  of the KBL NUC(Here we install Clear linux with version 31670 and then the
+  subsequent ACRN quick setup script will upgrade Clear linux to version 32030):
 
 .. _Clear Linux OS Server image:
-   https://download.clearlinux.org/releases/32030/clear/clear-32030-live-server.iso
+   https://download.clearlinux.org/releases/31670/clear/clear-31670-live-server.iso
 
   #. Create a bootable USB drive on Linux*:
 
@@ -192,7 +194,7 @@ Use the ACRN industry out-of-the-box image
 
 #. Burn the Service VM image onto the SATA disk::
 
-   # dd if=sos-industry-32030.img of=/dev/sda bs=4M oflag=sync status=progress
+   # dd if=sos-industry-32030.img of=/dev/sda bs=4M oflag=sync status=progress iflag=fullblock seek=0 conv=notrunc
 
 #. Configure the EFI firmware to boot the ACRN hypervisor by default:
 
@@ -226,7 +228,7 @@ Install and launch the Preempt-RT VM
 
 #. Burn the Preempt-RT VM image onto the NVMe disk::
 
-   # dd if=preempt-rt-32030.img of=/dev/nvme0n1 bs=4M oflag=sync status=progress
+   # dd if=preempt-rt-32030.img of=/dev/nvme0n1 bs=4M oflag=sync status=progress iflag=fullblock seek=0 conv=notrunc
 
 #. Use the ``lspci`` command to ensure that the correct NVMe device IDs will
    be used for the passthru before launching the script: