OrgACRN
/
acrn-hypervisor
mirror of https://github.com/projectacrn/acrn-hypervisor.git
1
0
Fork 0
Code Issues Releases Wiki Activity
acrn-hypervisor/Makefile

95 lines
3.3 KiB
Makefile
Raw Normal View History

add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
# global helper variables
T := $(CURDIR)
Makefile: separate PLATFORM into BOARD+FIRMWARE Combination of BOARD and FIRMWARE is a more precious definition. And we decide PLATFORM_XXX based on FIRMWARE, remove relative one in board config. We reserve PLATFORM for backward compatibility. Tracked-On: #1995 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Yin Fengwei < fengwei.yin@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2018-12-11 16:00:56 +08:00
Makefile: build for apl-nuc by default apl-nuc will be the default board building for. Tracked-On: #2780 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-03-15 12:02:28 +08:00
BOARD ?= apl-nuc
Makefile: separate PLATFORM into BOARD+FIRMWARE Combination of BOARD and FIRMWARE is a more precious definition. And we decide PLATFORM_XXX based on FIRMWARE, remove relative one in board config. We reserve PLATFORM for backward compatibility. Tracked-On: #1995 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Yin Fengwei < fengwei.yin@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2018-12-11 16:00:56 +08:00
ifeq ($(BOARD),apl-nuc)
FIRMWARE ?= uefi
else ifeq ($(BOARD),nuc6cayh)
FIRMWARE ?= uefi
endif
FIRMWARE ?= sbl
Makefile: keep using 'PLATFORM' variable for existing documentation Signed-off-by: Tonny Tzeng tonny.tzeng@intel.com
2018-05-17 16:44:11 +08:00
RELEASE ?= 0
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
acrn: allow to specify the build output folder Usages: make O=<any folder> Signed-off-by: Jack Ren <jack.ren@intel.com>
2018-05-23 19:24:29 +08:00
O ?= build
ROOT_OUT := $(shell mkdir -p $(O);cd $(O);pwd)
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
HV_OUT := $(ROOT_OUT)/hypervisor
modulization:move out efi dir from hypervisor move acrn-hypervisor/hypervisor/bsp/uefi/efi to arcn-hypervisor/efi-stub move acrn-hypervisor/hypervisor/bsp/uefi/clearlinux to acrn-hypervisor/efi-stub/clearlinux Changes to be committed: modified: Makefile modified: doc/getting-started/apl-nuc.rst renamed: hypervisor/bsp/uefi/efi/Makefile -> efi-stub/Makefile renamed: hypervisor/bsp/uefi/efi/boot.c -> efi-stub/boot.c renamed: hypervisor/bsp/uefi/efi/boot.h -> efi-stub/boot.h renamed: hypervisor/bsp/uefi/clearlinux/acrn.conf -> efi-stub/clearlinux/acrn.conf renamed: hypervisor/bsp/uefi/efi/efilinux.h -> efi-stub/efilinux.h renamed: hypervisor/bsp/uefi/efi/malloc.c -> efi-stub/malloc.c renamed: hypervisor/bsp/uefi/efi/multiboot.h -> efi-stub/multiboot.h renamed: hypervisor/bsp/uefi/efi/pe.c -> efi-stub/pe.c renamed: hypervisor/bsp/uefi/efi/stdlib.h -> efi-stub/stdlib.h modified: hypervisor/Makefile Tracked-On: #1842 Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com> Acked-by: Anthony Xu <anthony.xu@intel.com>
2018-12-10 19:32:42 +08:00
EFI_OUT := $(ROOT_OUT)/efi-stub
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
DM_OUT := $(ROOT_OUT)/devicemodel
TOOLS_OUT := $(ROOT_OUT)/tools
Build system: add target to build documentation This patch adds a new target to build the documentation from the top-level directory. Here is how to use it (from the top-level source directory): $ make doc Or $ make O=build-test doc To clean all documentation build artefacts, simply call $ make clean Or $ make O=build-test clean Calling 'make' with no arguments will *not* build the documentation by default. Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2018-06-12 17:38:43 +08:00
DOC_OUT := $(ROOT_OUT)/doc
DM: add tag info while no repo in release there is no git repo, which download from github release, however, acrn-dm -v will get tag info from this repo, in such case, the tag info was null. this patch will fix nul tag, which get it from CL mock build. Tracked-On: #676 Signed-off-by: Wei Liu <weix.w.liu@intel.com> Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
2018-08-06 10:09:27 +08:00
BUILD_VERSION ?=
BUILD_TAG ?=
DM: adapt dm-monitor and acrnctl to use the helpers Adapt dm-monitor and acrnctl to use the helper functions and new message definitions in acrn_mngr.h. These jobs must be done in one commit to avoid build problems: 1. message transmission and callback registration code are moved to libacrn-mngr.a, so old functions in dm-monitor could be removed to make code clean; 2. remove unnecessary monior_msg.h; 3. minor changes to acrnctl accordingly. Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Wang, Yu <yu1.wang@intel.com> signed-off-by: Yan Like <like.yan@intel.com> Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
2018-05-30 02:16:56 +08:00
export TOOLS_OUT
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
misc: totally remove misc folder misc now has a new home: https://github.com/intel/ioc-cbc-tools. The "Execstop" patch will be synced to new git tree soon. ioc-cbc-tools was just added to Clear Linux, and will be added to software-defined-cockpit bundle after this patch merged. Merging this patch may cause some IOC releated feature block until we get a new Clear Linux release. This is the switch window ... Signed-off-by: Alek Du <alek.du@intel.com>
2018-08-09 09:25:13 +08:00
.PHONY: all hypervisor devicemodel tools doc
all: hypervisor devicemodel tools
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
hypervisor:
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT) BOARD=$(BOARD) FIRMWARE=$(FIRMWARE) RELEASE=$(RELEASE) clean
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT) BOARD=$(BOARD) FIRMWARE=$(FIRMWARE) RELEASE=$(RELEASE)
Makefile: eliminate mistakes due to deprecated PLATFORM PLATFORM is deprecated, let's use it only for board detection Tracked-On: #1995 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2018-12-18 13:42:53 +08:00
ifeq ($(FIRMWARE),uefi)
modulization:move out efi dir from hypervisor move acrn-hypervisor/hypervisor/bsp/uefi/efi to arcn-hypervisor/efi-stub move acrn-hypervisor/hypervisor/bsp/uefi/clearlinux to acrn-hypervisor/efi-stub/clearlinux Changes to be committed: modified: Makefile modified: doc/getting-started/apl-nuc.rst renamed: hypervisor/bsp/uefi/efi/Makefile -> efi-stub/Makefile renamed: hypervisor/bsp/uefi/efi/boot.c -> efi-stub/boot.c renamed: hypervisor/bsp/uefi/efi/boot.h -> efi-stub/boot.h renamed: hypervisor/bsp/uefi/clearlinux/acrn.conf -> efi-stub/clearlinux/acrn.conf renamed: hypervisor/bsp/uefi/efi/efilinux.h -> efi-stub/efilinux.h renamed: hypervisor/bsp/uefi/efi/malloc.c -> efi-stub/malloc.c renamed: hypervisor/bsp/uefi/efi/multiboot.h -> efi-stub/multiboot.h renamed: hypervisor/bsp/uefi/efi/pe.c -> efi-stub/pe.c renamed: hypervisor/bsp/uefi/efi/stdlib.h -> efi-stub/stdlib.h modified: hypervisor/Makefile Tracked-On: #1842 Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com> Acked-by: Anthony Xu <anthony.xu@intel.com>
2018-12-10 19:32:42 +08:00
echo "building hypervisor as EFI executable..."
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/efi-stub HV_OBJDIR=$(HV_OUT) EFI_OBJDIR=$(EFI_OUT)
modulization:move out efi dir from hypervisor move acrn-hypervisor/hypervisor/bsp/uefi/efi to arcn-hypervisor/efi-stub move acrn-hypervisor/hypervisor/bsp/uefi/clearlinux to acrn-hypervisor/efi-stub/clearlinux Changes to be committed: modified: Makefile modified: doc/getting-started/apl-nuc.rst renamed: hypervisor/bsp/uefi/efi/Makefile -> efi-stub/Makefile renamed: hypervisor/bsp/uefi/efi/boot.c -> efi-stub/boot.c renamed: hypervisor/bsp/uefi/efi/boot.h -> efi-stub/boot.h renamed: hypervisor/bsp/uefi/clearlinux/acrn.conf -> efi-stub/clearlinux/acrn.conf renamed: hypervisor/bsp/uefi/efi/efilinux.h -> efi-stub/efilinux.h renamed: hypervisor/bsp/uefi/efi/malloc.c -> efi-stub/malloc.c renamed: hypervisor/bsp/uefi/efi/multiboot.h -> efi-stub/multiboot.h renamed: hypervisor/bsp/uefi/efi/pe.c -> efi-stub/pe.c renamed: hypervisor/bsp/uefi/efi/stdlib.h -> efi-stub/stdlib.h modified: hypervisor/Makefile Tracked-On: #1842 Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com> Acked-by: Anthony Xu <anthony.xu@intel.com>
2018-12-10 19:32:42 +08:00
endif
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
Makefile: add a target to build sbl hypervisor To build with only one command the sbl and efi hypervisor a target was added which build the SBL hypervisor version. Now you can call "make all sbl-hypervisor" and "make install sbl-hypervisor-install" Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-24 17:39:59 +08:00
sbl-hypervisor:
HV: rename board name of up2 to apl-up2 The Kconfig file of UP2 board was named as up2.config, rename to apl-up2.config to make it consistent with naming of apl-mrb/kbl-nuc ... The name change is also applied in Makefile to make sure compile success. Tracked-On: #2291 Signed-off-by: Victor Sun <victor.sun@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-02-25 10:12:45 +08:00
@mkdir -p $(HV_OUT)-sbl/apl-mrb $(HV_OUT)-sbl/apl-up2
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-mrb BOARD=apl-mrb FIRMWARE=sbl RELEASE=$(RELEASE) clean
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-mrb BOARD=apl-mrb FIRMWARE=sbl RELEASE=$(RELEASE)
HV: rename board name of up2 to apl-up2 The Kconfig file of UP2 board was named as up2.config, rename to apl-up2.config to make it consistent with naming of apl-mrb/kbl-nuc ... The name change is also applied in Makefile to make sure compile success. Tracked-On: #2291 Signed-off-by: Victor Sun <victor.sun@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-02-25 10:12:45 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-up2 BOARD=apl-up2 FIRMWARE=sbl RELEASE=$(RELEASE) clean
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-up2 BOARD=apl-up2 FIRMWARE=sbl RELEASE=$(RELEASE)
Makefile: add a target to build sbl hypervisor To build with only one command the sbl and efi hypervisor a target was added which build the SBL hypervisor version. Now you can call "make all sbl-hypervisor" and "make install sbl-hypervisor-install" Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-24 17:39:59 +08:00
DM: adapt dm-monitor and acrnctl to use the helpers Adapt dm-monitor and acrnctl to use the helper functions and new message definitions in acrn_mngr.h. These jobs must be done in one commit to avoid build problems: 1. message transmission and callback registration code are moved to libacrn-mngr.a, so old functions in dm-monitor could be removed to make code clean; 2. remove unnecessary monior_msg.h; 3. minor changes to acrnctl accordingly. Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Wang, Yu <yu1.wang@intel.com> signed-off-by: Yan Like <like.yan@intel.com> Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
2018-05-30 02:16:56 +08:00
devicemodel: tools
acrn-dm: enable debug option for acrn-dm enable acrn-dm debug option via RELEASE=0(by default) Tracked-On: #2939 Reviewed-by: Minggui Cao <minggui.cao@intel.com> Signed-off-by: Wei Liu <weix.w.liu@intel.com> Acked-by: Yu Wang <yu1.wang@intel.com>
2019-04-16 10:59:25 +08:00
$(MAKE) -C $(T)/devicemodel DM_OBJDIR=$(DM_OUT) RELEASE=$(RELEASE) clean
$(MAKE) -C $(T)/devicemodel DM_OBJDIR=$(DM_OUT) DM_BUILD_VERSION=$(BUILD_VERSION) DM_BUILD_TAG=$(BUILD_TAG) DM_ASL_COMPILER=$(ASL_COMPILER) RELEASE=$(RELEASE)
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
tools:
mkdir -p $(TOOLS_OUT)
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/tools OUT_DIR=$(TOOLS_OUT) RELEASE=$(RELEASE)
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
Build system: add target to build documentation This patch adds a new target to build the documentation from the top-level directory. Here is how to use it (from the top-level source directory): $ make doc Or $ make O=build-test doc To clean all documentation build artefacts, simply call $ make clean Or $ make O=build-test clean Calling 'make' with no arguments will *not* build the documentation by default. Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2018-06-12 17:38:43 +08:00
doc:
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/doc html BUILDDIR=$(DOC_OUT)
Build system: add target to build documentation This patch adds a new target to build the documentation from the top-level directory. Here is how to use it (from the top-level source directory): $ make doc Or $ make O=build-test doc To clean all documentation build artefacts, simply call $ make clean Or $ make O=build-test clean Calling 'make' with no arguments will *not* build the documentation by default. Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2018-06-12 17:38:43 +08:00
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
.PHONY: clean
clean:
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/tools OUT_DIR=$(TOOLS_OUT) clean
$(MAKE) -C $(T)/doc BUILDDIR=$(DOC_OUT) clean
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
rm -rf $(ROOT_OUT)
tools: acrn-crashlog: add service/config files and scripts This patch adds the service files, config files and script to run automatically at boot. And it adds install/uninstall part in Makefile. Compatiblity code for libsystemd.so and libsystemd-journal.so is added in Makefile also. Signed-off-by: Jin Zhi <zhi.jin@intel.com> Signed-off-by: CHEN Gang <gang.c.chen@intel.com> Reviewed-by: Zhang Yanmin <yanmin.zhang@intel.com> Reviewed-by: Liu Chuansheng <chuansheng.liu@intel.com> Reviewed-by: Zhao Yakui <yakui.zhao@intel.com> Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com> Acked-by: Eddie Dong <Eddie.dong@intel.com>
2018-05-18 16:38:19 +08:00
Makefile: implement make install The make install target was missing. This commits adds the intall target which uses the install target from subprojects. Also a make install target was created in each tool program. Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-17 03:21:45 +08:00
.PHONY: install
misc: totally remove misc folder misc now has a new home: https://github.com/intel/ioc-cbc-tools. The "Execstop" patch will be synced to new git tree soon. ioc-cbc-tools was just added to Clear Linux, and will be added to software-defined-cockpit bundle after this patch merged. Merging this patch may cause some IOC releated feature block until we get a new Clear Linux release. This is the switch window ... Signed-off-by: Alek Du <alek.du@intel.com>
2018-08-09 09:25:13 +08:00
install: hypervisor-install devicemodel-install tools-install
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
Makefile: implement make install The make install target was missing. This commits adds the intall target which uses the install target from subprojects. Also a make install target was created in each tool program. Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-17 03:21:45 +08:00
hypervisor-install:
Makefile: eliminate mistakes due to deprecated PLATFORM PLATFORM is deprecated, let's use it only for board detection Tracked-On: #1995 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2018-12-18 13:42:53 +08:00
ifeq ($(FIRMWARE),sbl)
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT) BOARD=$(BOARD) FIRMWARE=$(FIRMWARE) RELEASE=$(RELEASE) install
modulization:move out efi dir from hypervisor move acrn-hypervisor/hypervisor/bsp/uefi/efi to arcn-hypervisor/efi-stub move acrn-hypervisor/hypervisor/bsp/uefi/clearlinux to acrn-hypervisor/efi-stub/clearlinux Changes to be committed: modified: Makefile modified: doc/getting-started/apl-nuc.rst renamed: hypervisor/bsp/uefi/efi/Makefile -> efi-stub/Makefile renamed: hypervisor/bsp/uefi/efi/boot.c -> efi-stub/boot.c renamed: hypervisor/bsp/uefi/efi/boot.h -> efi-stub/boot.h renamed: hypervisor/bsp/uefi/clearlinux/acrn.conf -> efi-stub/clearlinux/acrn.conf renamed: hypervisor/bsp/uefi/efi/efilinux.h -> efi-stub/efilinux.h renamed: hypervisor/bsp/uefi/efi/malloc.c -> efi-stub/malloc.c renamed: hypervisor/bsp/uefi/efi/multiboot.h -> efi-stub/multiboot.h renamed: hypervisor/bsp/uefi/efi/pe.c -> efi-stub/pe.c renamed: hypervisor/bsp/uefi/efi/stdlib.h -> efi-stub/stdlib.h modified: hypervisor/Makefile Tracked-On: #1842 Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com> Acked-by: Anthony Xu <anthony.xu@intel.com>
2018-12-10 19:32:42 +08:00
endif
Makefile: eliminate mistakes due to deprecated PLATFORM PLATFORM is deprecated, let's use it only for board detection Tracked-On: #1995 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2018-12-18 13:42:53 +08:00
ifeq ($(FIRMWARE),uefi)
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT) BOARD=$(BOARD) FIRMWARE=$(FIRMWARE) RELEASE=$(RELEASE)
$(MAKE) -C $(T)/efi-stub HV_OBJDIR=$(HV_OUT) EFI_OBJDIR=$(EFI_OUT) all install
modulization:move out efi dir from hypervisor move acrn-hypervisor/hypervisor/bsp/uefi/efi to arcn-hypervisor/efi-stub move acrn-hypervisor/hypervisor/bsp/uefi/clearlinux to acrn-hypervisor/efi-stub/clearlinux Changes to be committed: modified: Makefile modified: doc/getting-started/apl-nuc.rst renamed: hypervisor/bsp/uefi/efi/Makefile -> efi-stub/Makefile renamed: hypervisor/bsp/uefi/efi/boot.c -> efi-stub/boot.c renamed: hypervisor/bsp/uefi/efi/boot.h -> efi-stub/boot.h renamed: hypervisor/bsp/uefi/clearlinux/acrn.conf -> efi-stub/clearlinux/acrn.conf renamed: hypervisor/bsp/uefi/efi/efilinux.h -> efi-stub/efilinux.h renamed: hypervisor/bsp/uefi/efi/malloc.c -> efi-stub/malloc.c renamed: hypervisor/bsp/uefi/efi/multiboot.h -> efi-stub/multiboot.h renamed: hypervisor/bsp/uefi/efi/pe.c -> efi-stub/pe.c renamed: hypervisor/bsp/uefi/efi/stdlib.h -> efi-stub/stdlib.h modified: hypervisor/Makefile Tracked-On: #1842 Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com> Acked-by: Anthony Xu <anthony.xu@intel.com>
2018-12-10 19:32:42 +08:00
endif
Makefile: implement make install The make install target was missing. This commits adds the intall target which uses the install target from subprojects. Also a make install target was created in each tool program. Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-17 03:21:45 +08:00
Makefile: add rules for installing debug information Add rules for installing debug information. Tracked-On: #2344 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-01-22 11:12:53 +08:00
hypervisor-install-debug:
ifeq ($(FIRMWARE),sbl)
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT) BOARD=$(BOARD) FIRMWARE=$(FIRMWARE) RELEASE=$(RELEASE) install-debug
Makefile: add rules for installing debug information Add rules for installing debug information. Tracked-On: #2344 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-01-22 11:12:53 +08:00
endif
ifeq ($(FIRMWARE),uefi)
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/efi-stub HV_OBJDIR=$(HV_OUT) EFI_OBJDIR=$(EFI_OUT) all install-debug
Makefile: add rules for installing debug information Add rules for installing debug information. Tracked-On: #2344 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-01-22 11:12:53 +08:00
endif
Makefile: add a target to build sbl hypervisor To build with only one command the sbl and efi hypervisor a target was added which build the SBL hypervisor version. Now you can call "make all sbl-hypervisor" and "make install sbl-hypervisor-install" Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-24 17:39:59 +08:00
sbl-hypervisor-install:
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-mrb BOARD=apl-mrb FIRMWARE=sbl RELEASE=$(RELEASE) install
HV: rename board name of up2 to apl-up2 The Kconfig file of UP2 board was named as up2.config, rename to apl-up2.config to make it consistent with naming of apl-mrb/kbl-nuc ... The name change is also applied in Makefile to make sure compile success. Tracked-On: #2291 Signed-off-by: Victor Sun <victor.sun@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-02-25 10:12:45 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-up2 BOARD=apl-up2 FIRMWARE=sbl RELEASE=$(RELEASE) install
Makefile: add a target to build sbl hypervisor To build with only one command the sbl and efi hypervisor a target was added which build the SBL hypervisor version. Now you can call "make all sbl-hypervisor" and "make install sbl-hypervisor-install" Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-24 17:39:59 +08:00
Makefile: add rules for installing debug information Add rules for installing debug information. Tracked-On: #2344 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-01-22 11:12:53 +08:00
sbl-hypervisor-install-debug:
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-mrb BOARD=apl-mrb FIRMWARE=sbl RELEASE=$(RELEASE) install-debug
HV: rename board name of up2 to apl-up2 The Kconfig file of UP2 board was named as up2.config, rename to apl-up2.config to make it consistent with naming of apl-mrb/kbl-nuc ... The name change is also applied in Makefile to make sure compile success. Tracked-On: #2291 Signed-off-by: Victor Sun <victor.sun@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-02-25 10:12:45 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-up2 BOARD=apl-up2 FIRMWARE=sbl RELEASE=$(RELEASE) install-debug
Makefile: add rules for installing debug information Add rules for installing debug information. Tracked-On: #2344 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-01-22 11:12:53 +08:00
Makefile: implement make install The make install target was missing. This commits adds the intall target which uses the install target from subprojects. Also a make install target was created in each tool program. Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-17 03:21:45 +08:00
devicemodel-install:
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/devicemodel DM_OBJDIR=$(DM_OUT) install
Makefile: implement make install The make install target was missing. This commits adds the intall target which uses the install target from subprojects. Also a make install target was created in each tool program. Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-17 03:21:45 +08:00
Makefile: fix typos and style Remove the trailing ";" and "\" and fix a typo in install. Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-17 06:59:53 +08:00
tools-install:
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/tools OUT_DIR=$(TOOLS_OUT) RELEASE=$(RELEASE) install