OrgACRN
/
acrn-hypervisor
mirror of https://github.com/projectacrn/acrn-hypervisor.git
1
0
Fork 0
Code Issues Releases Wiki Activity
acrn-hypervisor/Makefile

94 lines
3.3 KiB
Makefile
Raw Normal View History

add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
# global helper variables
T := $(CURDIR)
Makefile: separate PLATFORM into BOARD+FIRMWARE Combination of BOARD and FIRMWARE is a more precious definition. And we decide PLATFORM_XXX based on FIRMWARE, remove relative one in board config. We reserve PLATFORM for backward compatibility. Tracked-On: #1995 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Yin Fengwei < fengwei.yin@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2018-12-11 16:00:56 +08:00
Makefile: build for apl-nuc by default apl-nuc will be the default board building for. Tracked-On: #2780 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-03-15 12:02:28 +08:00
BOARD ?= apl-nuc
Makefile: separate PLATFORM into BOARD+FIRMWARE Combination of BOARD and FIRMWARE is a more precious definition. And we decide PLATFORM_XXX based on FIRMWARE, remove relative one in board config. We reserve PLATFORM for backward compatibility. Tracked-On: #1995 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Yin Fengwei < fengwei.yin@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2018-12-11 16:00:56 +08:00
make: white-list SBL firmware boards The top-level Makefile white-lists BOARDs require to generate UEFI executable, but more UEFI BOARDs have been supported since then. As a result, the build instructions in existing documents may not be sufficient for those new BOARD targets, if the reader misses to supply the FIRMWARE variable while building the hypervisor. Instead of adding new UEFI BOARD types using the original long if-else statements, I'd like to propose to white-list SBL BOARD types, and add the new SBL BOARD types to the list while needed. Tracked-On: #3541 Signed-off-by: Tonny Tzeng <tonny.tzeng@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-08-06 19:46:31 +08:00
ifneq (,$(filter $(BOARD),apl-mrb))
FIRMWARE ?= sbl
else
FIRMWARE ?= uefi
Makefile: separate PLATFORM into BOARD+FIRMWARE Combination of BOARD and FIRMWARE is a more precious definition. And we decide PLATFORM_XXX based on FIRMWARE, remove relative one in board config. We reserve PLATFORM for backward compatibility. Tracked-On: #1995 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Yin Fengwei < fengwei.yin@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2018-12-11 16:00:56 +08:00
endif
Makefile: keep using 'PLATFORM' variable for existing documentation Signed-off-by: Tonny Tzeng tonny.tzeng@intel.com
2018-05-17 16:44:11 +08:00
RELEASE ?= 0
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
acrn: allow to specify the build output folder Usages: make O=<any folder> Signed-off-by: Jack Ren <jack.ren@intel.com>
2018-05-23 19:24:29 +08:00
O ?= build
ROOT_OUT := $(shell mkdir -p $(O);cd $(O);pwd)
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
HV_OUT := $(ROOT_OUT)/hypervisor
HV:Acrn-hypvervisor Root Directory Clean-up and create misc/ folder for Acrn daemons, services and tools. This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build Tracked-On: #3482 Signed-off-by: Terry Zou <terry.zou@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-07-29 12:21:54 +08:00
EFI_OUT := $(ROOT_OUT)/misc/efi-stub
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
DM_OUT := $(ROOT_OUT)/devicemodel
HV:Acrn-hypvervisor Root Directory Clean-up and create misc/ folder for Acrn daemons, services and tools. This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build Tracked-On: #3482 Signed-off-by: Terry Zou <terry.zou@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-07-29 12:21:54 +08:00
TOOLS_OUT := $(ROOT_OUT)/misc/tools
Build system: add target to build documentation This patch adds a new target to build the documentation from the top-level directory. Here is how to use it (from the top-level source directory): $ make doc Or $ make O=build-test doc To clean all documentation build artefacts, simply call $ make clean Or $ make O=build-test clean Calling 'make' with no arguments will *not* build the documentation by default. Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2018-06-12 17:38:43 +08:00
DOC_OUT := $(ROOT_OUT)/doc
DM: add tag info while no repo in release there is no git repo, which download from github release, however, acrn-dm -v will get tag info from this repo, in such case, the tag info was null. this patch will fix nul tag, which get it from CL mock build. Tracked-On: #676 Signed-off-by: Wei Liu <weix.w.liu@intel.com> Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
2018-08-06 10:09:27 +08:00
BUILD_VERSION ?=
BUILD_TAG ?=
DM: adapt dm-monitor and acrnctl to use the helpers Adapt dm-monitor and acrnctl to use the helper functions and new message definitions in acrn_mngr.h. These jobs must be done in one commit to avoid build problems: 1. message transmission and callback registration code are moved to libacrn-mngr.a, so old functions in dm-monitor could be removed to make code clean; 2. remove unnecessary monior_msg.h; 3. minor changes to acrnctl accordingly. Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Wang, Yu <yu1.wang@intel.com> signed-off-by: Yan Like <like.yan@intel.com> Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
2018-05-30 02:16:56 +08:00
export TOOLS_OUT
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
misc: totally remove misc folder misc now has a new home: https://github.com/intel/ioc-cbc-tools. The "Execstop" patch will be synced to new git tree soon. ioc-cbc-tools was just added to Clear Linux, and will be added to software-defined-cockpit bundle after this patch merged. Merging this patch may cause some IOC releated feature block until we get a new Clear Linux release. This is the switch window ... Signed-off-by: Alek Du <alek.du@intel.com>
2018-08-09 09:25:13 +08:00
.PHONY: all hypervisor devicemodel tools doc
all: hypervisor devicemodel tools
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
hypervisor:
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT) BOARD=$(BOARD) FIRMWARE=$(FIRMWARE) RELEASE=$(RELEASE) clean
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT) BOARD=$(BOARD) FIRMWARE=$(FIRMWARE) RELEASE=$(RELEASE)
Makefile: eliminate mistakes due to deprecated PLATFORM PLATFORM is deprecated, let's use it only for board detection Tracked-On: #1995 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2018-12-18 13:42:53 +08:00
ifeq ($(FIRMWARE),uefi)
modulization:move out efi dir from hypervisor move acrn-hypervisor/hypervisor/bsp/uefi/efi to arcn-hypervisor/efi-stub move acrn-hypervisor/hypervisor/bsp/uefi/clearlinux to acrn-hypervisor/efi-stub/clearlinux Changes to be committed: modified: Makefile modified: doc/getting-started/apl-nuc.rst renamed: hypervisor/bsp/uefi/efi/Makefile -> efi-stub/Makefile renamed: hypervisor/bsp/uefi/efi/boot.c -> efi-stub/boot.c renamed: hypervisor/bsp/uefi/efi/boot.h -> efi-stub/boot.h renamed: hypervisor/bsp/uefi/clearlinux/acrn.conf -> efi-stub/clearlinux/acrn.conf renamed: hypervisor/bsp/uefi/efi/efilinux.h -> efi-stub/efilinux.h renamed: hypervisor/bsp/uefi/efi/malloc.c -> efi-stub/malloc.c renamed: hypervisor/bsp/uefi/efi/multiboot.h -> efi-stub/multiboot.h renamed: hypervisor/bsp/uefi/efi/pe.c -> efi-stub/pe.c renamed: hypervisor/bsp/uefi/efi/stdlib.h -> efi-stub/stdlib.h modified: hypervisor/Makefile Tracked-On: #1842 Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com> Acked-by: Anthony Xu <anthony.xu@intel.com>
2018-12-10 19:32:42 +08:00
echo "building hypervisor as EFI executable..."
HV:Acrn-hypvervisor Root Directory Clean-up and create misc/ folder for Acrn daemons, services and tools. This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build Tracked-On: #3482 Signed-off-by: Terry Zou <terry.zou@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-07-29 12:21:54 +08:00
$(MAKE) -C $(T)/misc/efi-stub HV_OBJDIR=$(HV_OUT) EFI_OBJDIR=$(EFI_OUT)
modulization:move out efi dir from hypervisor move acrn-hypervisor/hypervisor/bsp/uefi/efi to arcn-hypervisor/efi-stub move acrn-hypervisor/hypervisor/bsp/uefi/clearlinux to acrn-hypervisor/efi-stub/clearlinux Changes to be committed: modified: Makefile modified: doc/getting-started/apl-nuc.rst renamed: hypervisor/bsp/uefi/efi/Makefile -> efi-stub/Makefile renamed: hypervisor/bsp/uefi/efi/boot.c -> efi-stub/boot.c renamed: hypervisor/bsp/uefi/efi/boot.h -> efi-stub/boot.h renamed: hypervisor/bsp/uefi/clearlinux/acrn.conf -> efi-stub/clearlinux/acrn.conf renamed: hypervisor/bsp/uefi/efi/efilinux.h -> efi-stub/efilinux.h renamed: hypervisor/bsp/uefi/efi/malloc.c -> efi-stub/malloc.c renamed: hypervisor/bsp/uefi/efi/multiboot.h -> efi-stub/multiboot.h renamed: hypervisor/bsp/uefi/efi/pe.c -> efi-stub/pe.c renamed: hypervisor/bsp/uefi/efi/stdlib.h -> efi-stub/stdlib.h modified: hypervisor/Makefile Tracked-On: #1842 Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com> Acked-by: Anthony Xu <anthony.xu@intel.com>
2018-12-10 19:32:42 +08:00
endif
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
Makefile: add a target to build sbl hypervisor To build with only one command the sbl and efi hypervisor a target was added which build the SBL hypervisor version. Now you can call "make all sbl-hypervisor" and "make install sbl-hypervisor-install" Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-24 17:39:59 +08:00
sbl-hypervisor:
HV: rename board name of up2 to apl-up2 The Kconfig file of UP2 board was named as up2.config, rename to apl-up2.config to make it consistent with naming of apl-mrb/kbl-nuc ... The name change is also applied in Makefile to make sure compile success. Tracked-On: #2291 Signed-off-by: Victor Sun <victor.sun@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-02-25 10:12:45 +08:00
@mkdir -p $(HV_OUT)-sbl/apl-mrb $(HV_OUT)-sbl/apl-up2
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-mrb BOARD=apl-mrb FIRMWARE=sbl RELEASE=$(RELEASE) clean
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-mrb BOARD=apl-mrb FIRMWARE=sbl RELEASE=$(RELEASE)
HV: rename board name of up2 to apl-up2 The Kconfig file of UP2 board was named as up2.config, rename to apl-up2.config to make it consistent with naming of apl-mrb/kbl-nuc ... The name change is also applied in Makefile to make sure compile success. Tracked-On: #2291 Signed-off-by: Victor Sun <victor.sun@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-02-25 10:12:45 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-up2 BOARD=apl-up2 FIRMWARE=sbl RELEASE=$(RELEASE) clean
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-up2 BOARD=apl-up2 FIRMWARE=sbl RELEASE=$(RELEASE)
Makefile: add a target to build sbl hypervisor To build with only one command the sbl and efi hypervisor a target was added which build the SBL hypervisor version. Now you can call "make all sbl-hypervisor" and "make install sbl-hypervisor-install" Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-24 17:39:59 +08:00
DM: adapt dm-monitor and acrnctl to use the helpers Adapt dm-monitor and acrnctl to use the helper functions and new message definitions in acrn_mngr.h. These jobs must be done in one commit to avoid build problems: 1. message transmission and callback registration code are moved to libacrn-mngr.a, so old functions in dm-monitor could be removed to make code clean; 2. remove unnecessary monior_msg.h; 3. minor changes to acrnctl accordingly. Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Wang, Yu <yu1.wang@intel.com> signed-off-by: Yan Like <like.yan@intel.com> Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
2018-05-30 02:16:56 +08:00
devicemodel: tools
acrn-dm: enable debug option for acrn-dm enable acrn-dm debug option via RELEASE=0(by default) Tracked-On: #2939 Reviewed-by: Minggui Cao <minggui.cao@intel.com> Signed-off-by: Wei Liu <weix.w.liu@intel.com> Acked-by: Yu Wang <yu1.wang@intel.com>
2019-04-16 10:59:25 +08:00
$(MAKE) -C $(T)/devicemodel DM_OBJDIR=$(DM_OUT) RELEASE=$(RELEASE) clean
$(MAKE) -C $(T)/devicemodel DM_OBJDIR=$(DM_OUT) DM_BUILD_VERSION=$(BUILD_VERSION) DM_BUILD_TAG=$(BUILD_TAG) DM_ASL_COMPILER=$(ASL_COMPILER) RELEASE=$(RELEASE)
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
tools:
mkdir -p $(TOOLS_OUT)
HV:Acrn-hypvervisor Root Directory Clean-up and create misc/ folder for Acrn daemons, services and tools. This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build Tracked-On: #3482 Signed-off-by: Terry Zou <terry.zou@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-07-29 12:21:54 +08:00
$(MAKE) -C $(T)/misc OUT_DIR=$(TOOLS_OUT) RELEASE=$(RELEASE)
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
Build system: add target to build documentation This patch adds a new target to build the documentation from the top-level directory. Here is how to use it (from the top-level source directory): $ make doc Or $ make O=build-test doc To clean all documentation build artefacts, simply call $ make clean Or $ make O=build-test clean Calling 'make' with no arguments will *not* build the documentation by default. Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2018-06-12 17:38:43 +08:00
doc:
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/doc html BUILDDIR=$(DOC_OUT)
Build system: add target to build documentation This patch adds a new target to build the documentation from the top-level directory. Here is how to use it (from the top-level source directory): $ make doc Or $ make O=build-test doc To clean all documentation build artefacts, simply call $ make clean Or $ make O=build-test clean Calling 'make' with no arguments will *not* build the documentation by default. Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2018-06-12 17:38:43 +08:00
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
.PHONY: clean
clean:
HV:Acrn-hypvervisor Root Directory Clean-up and create misc/ folder for Acrn daemons, services and tools. This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build Tracked-On: #3482 Signed-off-by: Terry Zou <terry.zou@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-07-29 12:21:54 +08:00
$(MAKE) -C $(T)/misc OUT_DIR=$(TOOLS_OUT) clean
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/doc BUILDDIR=$(DOC_OUT) clean
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
rm -rf $(ROOT_OUT)
tools: acrn-crashlog: add service/config files and scripts This patch adds the service files, config files and script to run automatically at boot. And it adds install/uninstall part in Makefile. Compatiblity code for libsystemd.so and libsystemd-journal.so is added in Makefile also. Signed-off-by: Jin Zhi <zhi.jin@intel.com> Signed-off-by: CHEN Gang <gang.c.chen@intel.com> Reviewed-by: Zhang Yanmin <yanmin.zhang@intel.com> Reviewed-by: Liu Chuansheng <chuansheng.liu@intel.com> Reviewed-by: Zhao Yakui <yakui.zhao@intel.com> Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com> Acked-by: Eddie Dong <Eddie.dong@intel.com>
2018-05-18 16:38:19 +08:00
Makefile: implement make install The make install target was missing. This commits adds the intall target which uses the install target from subprojects. Also a make install target was created in each tool program. Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-17 03:21:45 +08:00
.PHONY: install
misc: totally remove misc folder misc now has a new home: https://github.com/intel/ioc-cbc-tools. The "Execstop" patch will be synced to new git tree soon. ioc-cbc-tools was just added to Clear Linux, and will be added to software-defined-cockpit bundle after this patch merged. Merging this patch may cause some IOC releated feature block until we get a new Clear Linux release. This is the switch window ... Signed-off-by: Alek Du <alek.du@intel.com>
2018-08-09 09:25:13 +08:00
install: hypervisor-install devicemodel-install tools-install
add a makefile under project root directory it can be used as following: make ==> to make hypervisor & devicemodel & tools also modify tools makefile to support out-dir setting. Signed-off-by: Minggui Cao <minggui.cao@intel.com> Reviewed-by: Jack Ren <jack.ren@intel.com>
2018-05-15 09:09:20 +08:00
Makefile: implement make install The make install target was missing. This commits adds the intall target which uses the install target from subprojects. Also a make install target was created in each tool program. Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-17 03:21:45 +08:00
hypervisor-install:
Makefile: eliminate mistakes due to deprecated PLATFORM PLATFORM is deprecated, let's use it only for board detection Tracked-On: #1995 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2018-12-18 13:42:53 +08:00
ifeq ($(FIRMWARE),sbl)
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT) BOARD=$(BOARD) FIRMWARE=$(FIRMWARE) RELEASE=$(RELEASE) install
modulization:move out efi dir from hypervisor move acrn-hypervisor/hypervisor/bsp/uefi/efi to arcn-hypervisor/efi-stub move acrn-hypervisor/hypervisor/bsp/uefi/clearlinux to acrn-hypervisor/efi-stub/clearlinux Changes to be committed: modified: Makefile modified: doc/getting-started/apl-nuc.rst renamed: hypervisor/bsp/uefi/efi/Makefile -> efi-stub/Makefile renamed: hypervisor/bsp/uefi/efi/boot.c -> efi-stub/boot.c renamed: hypervisor/bsp/uefi/efi/boot.h -> efi-stub/boot.h renamed: hypervisor/bsp/uefi/clearlinux/acrn.conf -> efi-stub/clearlinux/acrn.conf renamed: hypervisor/bsp/uefi/efi/efilinux.h -> efi-stub/efilinux.h renamed: hypervisor/bsp/uefi/efi/malloc.c -> efi-stub/malloc.c renamed: hypervisor/bsp/uefi/efi/multiboot.h -> efi-stub/multiboot.h renamed: hypervisor/bsp/uefi/efi/pe.c -> efi-stub/pe.c renamed: hypervisor/bsp/uefi/efi/stdlib.h -> efi-stub/stdlib.h modified: hypervisor/Makefile Tracked-On: #1842 Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com> Acked-by: Anthony Xu <anthony.xu@intel.com>
2018-12-10 19:32:42 +08:00
endif
Makefile: eliminate mistakes due to deprecated PLATFORM PLATFORM is deprecated, let's use it only for board detection Tracked-On: #1995 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2018-12-18 13:42:53 +08:00
ifeq ($(FIRMWARE),uefi)
Makefile: Add install for uefi firmware Add to include acrn.32.out during cl rpm generation as acrn.(board).32.out This is required for Hybrid mode bringup in multios Tracked-On:#3487 Signed-off-by: Nikhil Rane <nikhil.rane@intel.com>
2019-07-28 20:28:56 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT) BOARD=$(BOARD) FIRMWARE=$(FIRMWARE) RELEASE=$(RELEASE) install
HV:Acrn-hypvervisor Root Directory Clean-up and create misc/ folder for Acrn daemons, services and tools. This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build Tracked-On: #3482 Signed-off-by: Terry Zou <terry.zou@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-07-29 12:21:54 +08:00
$(MAKE) -C $(T)/misc/efi-stub HV_OBJDIR=$(HV_OUT) EFI_OBJDIR=$(EFI_OUT) all install
modulization:move out efi dir from hypervisor move acrn-hypervisor/hypervisor/bsp/uefi/efi to arcn-hypervisor/efi-stub move acrn-hypervisor/hypervisor/bsp/uefi/clearlinux to acrn-hypervisor/efi-stub/clearlinux Changes to be committed: modified: Makefile modified: doc/getting-started/apl-nuc.rst renamed: hypervisor/bsp/uefi/efi/Makefile -> efi-stub/Makefile renamed: hypervisor/bsp/uefi/efi/boot.c -> efi-stub/boot.c renamed: hypervisor/bsp/uefi/efi/boot.h -> efi-stub/boot.h renamed: hypervisor/bsp/uefi/clearlinux/acrn.conf -> efi-stub/clearlinux/acrn.conf renamed: hypervisor/bsp/uefi/efi/efilinux.h -> efi-stub/efilinux.h renamed: hypervisor/bsp/uefi/efi/malloc.c -> efi-stub/malloc.c renamed: hypervisor/bsp/uefi/efi/multiboot.h -> efi-stub/multiboot.h renamed: hypervisor/bsp/uefi/efi/pe.c -> efi-stub/pe.c renamed: hypervisor/bsp/uefi/efi/stdlib.h -> efi-stub/stdlib.h modified: hypervisor/Makefile Tracked-On: #1842 Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com> Acked-by: Anthony Xu <anthony.xu@intel.com>
2018-12-10 19:32:42 +08:00
endif
Makefile: implement make install The make install target was missing. This commits adds the intall target which uses the install target from subprojects. Also a make install target was created in each tool program. Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-17 03:21:45 +08:00
Makefile: add rules for installing debug information Add rules for installing debug information. Tracked-On: #2344 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-01-22 11:12:53 +08:00
hypervisor-install-debug:
ifeq ($(FIRMWARE),sbl)
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT) BOARD=$(BOARD) FIRMWARE=$(FIRMWARE) RELEASE=$(RELEASE) install-debug
Makefile: add rules for installing debug information Add rules for installing debug information. Tracked-On: #2344 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-01-22 11:12:53 +08:00
endif
ifeq ($(FIRMWARE),uefi)
HV:Acrn-hypvervisor Root Directory Clean-up and create misc/ folder for Acrn daemons, services and tools. This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build Tracked-On: #3482 Signed-off-by: Terry Zou <terry.zou@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-07-29 12:21:54 +08:00
$(MAKE) -C $(T)/misc/efi-stub HV_OBJDIR=$(HV_OUT) EFI_OBJDIR=$(EFI_OUT) all install-debug
Makefile: add rules for installing debug information Add rules for installing debug information. Tracked-On: #2344 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-01-22 11:12:53 +08:00
endif
Makefile: add a target to build sbl hypervisor To build with only one command the sbl and efi hypervisor a target was added which build the SBL hypervisor version. Now you can call "make all sbl-hypervisor" and "make install sbl-hypervisor-install" Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-24 17:39:59 +08:00
sbl-hypervisor-install:
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-mrb BOARD=apl-mrb FIRMWARE=sbl RELEASE=$(RELEASE) install
HV: rename board name of up2 to apl-up2 The Kconfig file of UP2 board was named as up2.config, rename to apl-up2.config to make it consistent with naming of apl-mrb/kbl-nuc ... The name change is also applied in Makefile to make sure compile success. Tracked-On: #2291 Signed-off-by: Victor Sun <victor.sun@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-02-25 10:12:45 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-up2 BOARD=apl-up2 FIRMWARE=sbl RELEASE=$(RELEASE) install
Makefile: add a target to build sbl hypervisor To build with only one command the sbl and efi hypervisor a target was added which build the SBL hypervisor version. Now you can call "make all sbl-hypervisor" and "make install sbl-hypervisor-install" Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-24 17:39:59 +08:00
Makefile: add rules for installing debug information Add rules for installing debug information. Tracked-On: #2344 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-01-22 11:12:53 +08:00
sbl-hypervisor-install-debug:
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-mrb BOARD=apl-mrb FIRMWARE=sbl RELEASE=$(RELEASE) install-debug
HV: rename board name of up2 to apl-up2 The Kconfig file of UP2 board was named as up2.config, rename to apl-up2.config to make it consistent with naming of apl-mrb/kbl-nuc ... The name change is also applied in Makefile to make sure compile success. Tracked-On: #2291 Signed-off-by: Victor Sun <victor.sun@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-02-25 10:12:45 +08:00
$(MAKE) -C $(T)/hypervisor HV_OBJDIR=$(HV_OUT)-sbl/apl-up2 BOARD=apl-up2 FIRMWARE=sbl RELEASE=$(RELEASE) install-debug
Makefile: add rules for installing debug information Add rules for installing debug information. Tracked-On: #2344 Signed-off-by: Tw <wei.tan@intel.com> Reviewed-by: Binbin Wu <binbin.wu@intel.com>
2019-01-22 11:12:53 +08:00
Makefile: implement make install The make install target was missing. This commits adds the intall target which uses the install target from subprojects. Also a make install target was created in each tool program. Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-17 03:21:45 +08:00
devicemodel-install:
Use $(MAKE) when recursing Using 'make' directly means that the jobserver environment variables don't get passed down, so sub-builds for example don't use -j. This is documented as the wrong thing to do: https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html#MAKE-Variable Use $(MAKE) instead, and compile times drastically improve: acrn-devicemodel do_compile -13.5s -89.6% 15.0s -> 1.6s Tracked-On: #2370 Signed-off-by: Ross Burton <ross.burton@intel.com>
2019-01-17 05:35:20 +08:00
$(MAKE) -C $(T)/devicemodel DM_OBJDIR=$(DM_OUT) install
Makefile: implement make install The make install target was missing. This commits adds the intall target which uses the install target from subprojects. Also a make install target was created in each tool program. Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-17 03:21:45 +08:00
Makefile: fix typos and style Remove the trailing ";" and "\" and fix a typo in install. Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
2018-05-17 06:59:53 +08:00
tools-install:
HV:Acrn-hypvervisor Root Directory Clean-up and create misc/ folder for Acrn daemons, services and tools. This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build Tracked-On: #3482 Signed-off-by: Terry Zou <terry.zou@intel.com> Acked-by: Eddie Dong <eddie.dong@intel.com>
2019-07-29 12:21:54 +08:00
$(MAKE) -C $(T)/misc OUT_DIR=$(TOOLS_OUT) RELEASE=$(RELEASE) install